Can the Flat foam nozzle (plastic) with plug DN11.8 be used at 2.5 bar and will it perform better at 3.5â4 bar for foaming, spraying, and rinsing?

Yes. The Flat foam nozzle (plastic) with plug DN11.8 can be used at 2.5 bar . it is designed for foaming at low pressure. However, performance improves at 3.5â4 bar: foaming is more effective and produces better foam quality at that higher range. The nozzle is also suitable for spraying and rinsing cleaned surfaces at these pressures. Connection: quick coupling plug DN11.8 (stainless steel); nozzle material: plastic.

Is the Flat foam nozzle (plastic) with plug DN11.8 suitable for rinsing and spraying as well as low-pressure foaming?

Yes. The Flat foam nozzle (plastic) with plug DN11.8 is suitable for low-pressure foaming (designed for 2.5 bar, optimal at 3.5â4 bar) and can also be used for spraying and rinsing cleaned surfaces. Connection: quick coupling plug DN11.8 (stainless steel); nozzle material: plastic.

Does the Flat foam nozzle (plastic) with plug DN11.8 require pressure adjustments for optimal foaming, spraying, or rinsing?

Yes. The Flat foam nozzle (plastic) with plug DN11.8 requires pressure adjustments for best performance: - Foaming: Designed for low pressureâuse around 2.5 bar, with optimal results at 3.5â4 bar. Adjust pressure into that range to achieve proper foam formation and coverage. - Spraying and rinsing: It can perform these tasks as well, but higher pressure within and slightly above the foaming range will improve spray force and rinsing effectiveness. Avoid excessive pressure beyond the nozzleâs intended limits to prevent poor foam quality or nozzle wear. In short, set pressure near 2.5 bar for basic foaming and aim for 3.5â4 bar for optimal foaming; increase moderately for more vigorous spraying or rinsing while staying mindful of the nozzleâs specifications.

Flat foam nozzle, plug DN11.8, plastic

Additional information

Flat nozzle made of plastic intended for foaming at low pressure – 2.5 bar (best results are achieved at 3.5 ÷ 4 bar). It can also be used for spraying and rinsing cleaned surfaces. Connection: quick coupling plug DN 11.8 (stainless steel). Nozzle material: plastic.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
AK-LANFA02	Flat nozzle for foam, plug DN11.8, SS/nylon, black	-	4	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Flat nozzle made of plastic intended for foaming at low pressure – 2.5 bar (best results are achieved at 3.5 ÷ 4 bar). It can also be used for spraying and rinsing cleaned surfaces. Connection: quick coupling plug DN 11.8 (stainless steel). Nozzle material: plastic.