Does the PROFICLEAN 416 gun nozzle, brass fit guns with M21 x 1.5 threaded ports and include the o-ring?

Yes . the PROFICLEAN 416 gun nozzle, brass with M21 x 1.5 thread fits guns that have M21 x 1.5 threaded ports. The product description explicitly lists the thread as M21 x 1.5 and specifies that it is a nozzle for the PROFICLEAN 416 gun. The listing also notes â(o-ring)â indicating that the o-ring is included. Available nozzle diameters are 2 mm (standard in the gun), 4 mm, and 5.5 mm with a length L = 13 mm (with thread), and a 4 mm option also available in 28 mm and 58 mm lengths. Material: nickel-plated brass.

Can the PROFICLEAN 416 gun nozzle, brass be used with different spray diameters and lengths for varied applications?

Yes. The PROFICLEAN 416 gun nozzle, brass uses an M21 x 1.5 (oâring) thread and the gunâs standard nozzle is Ã 2 mm, but replacement nozzles are offered in multiple diameters and lengths to suit varied applications. Available diameters: 2 mm, 4 mm and 5.5 mm (each L = 13 mm with thread). Additionally, a 4 mm nozzle is available in longer lengths of 28 mm and 58 mm. All nozzles are nickelâplated brass, allowing you to change spray diameter and reach (length) to adjust flow, spray pattern and accessibility for different tasks.

Is the PROFICLEAN 416 gun nozzle, brass compatible with high-temperature cleaning fluids?

The PROFICLEAN 416 gun nozzle, brass is made of nickel-plated brass. Brass has moderate thermal resistance but is not recommended for use with very high-temperature cleaning fluids that exceed brassâs softening or annealing range or that are chemically aggressive at elevated temperatures. Nickel plating improves corrosion resistance and surface hardness, but it does not substantially raise the base metalâs temperature limits. Practical guidance: - Safe for warm to moderately hot cleaning fluids and common solvents within typical spray-cleaning temperatures (below ~150â200 Â°C). - Not suitable for prolonged exposure to very high temperatures or highly corrosive high-temperature chemicals (steam, strong acids/alkalis at elevated temperature, or media that attack copper/zinc alloys), which can cause deformation, loss of mechanical properties, plating failure, or accelerated corrosion. - For critical high-temperature or highly corrosive applications, choose a nozzle made of stainless steel, high-temperature alloy, or explicitly specified for those fluids. If you can provide the exact cleaning fluid and operating temperature, I can give a more specific recommendation.

PROFICLEAN 416 gun nozzle, brass

All products, Low-pressure water spray guns/

Additional information

Standard length [m]	2

Nozzle for PROFICLEAN 416 gun with M21 x 1.5 thread (o-ring). Standard nozzle in the gun Ø 2 mm. Available diameters: 2 mm, 4 mm, or 5.5 mm (L = 13 mm, with thread) and 4 mm in lengths of 28 mm and 58 mm. Material: nickel-plated brass.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EW-41695	Nozzle, hole diameter 4 mm, L=58 mm, GZ M21x1.5, for PROFICLEAN gun, nickel brass.	-	40	In stock	Enquiry
EW-41696	Nozzle, hole diameter 4 mm, L=28 mm, GZ M21x1.5, for PROFICLEAN gun, nickel brass.	-	40	In stock	Enquiry
EW-41697	Nozzle, hole diameter 5.5 mm, L=13 mm, GZ M21x1.5, for PROFICLEAN gun, nickel brass.	-	40	In stock	Enquiry
EW-41698	Nozzle, hole diameter 4 mm, L=13 mm, GZ M21x1.5, for PROFICLEAN gun, nickel brass.	-	40	In stock	Enquiry
EW-41699	Nozzle, hole diameter 2 mm, L=13 mm, GZ M21x1.5, for PROFICLEAN gun, nickel brass.	-	40	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Nozzle for PROFICLEAN 416 gun with M21 x 1.5 thread (o-ring). Standard nozzle in the gun Ø 2 mm. Available diameters: 2 mm, 4 mm, or 5.5 mm (L = 13 mm, with thread) and 4 mm in lengths of 28 mm and 58 mm. Material: nickel-plated brass.