Can the Compressed air fine filter D 100 - 200 - 300, without end plates, SKILLAIRÂ® series operate continuously at 15 bar and +50Â°C with an automatic condensate drain?

Yes. The Compressed air fine filter D 100 - 200 - 300, without end plates, SKILLAIRÂ® series can operate continuously at 15 bar and +50Â°C provided you select the correct size and drain type rated for that supply pressure. The product specification lists supply pressure up to 15 bar (depending on size and type of drain) and operating temperature up to +50Â°C. For continuous operation at the maximum pressure you must confirm the chosen size (100, 200 or 300) and the automatic condensate drain variant (SAC or RA) are certified for 15 bar. Also verify flow requirements: at 6 bar Îp=1 bar the nominal flows are 230 l/min (100), 360 l/min (200) and 500 l/min (300); actual flows at 15 bar will differ. If in doubt, confirm with the manufacturer or supplier the specific size/drain combination is rated for continuous 15 bar service.

Does the Compressed air fine filter D 100 - 200 - 300, without end plates, SKILLAIRÂ® series require different drain types for optimal performance at 6 bar and Îp = 1 bar?

Compressed air fine filter D 100 - 200 - 300, without end plates, SKILLAIRÂ® series does not inherently require different drain types specifically for optimal performance at 6 bar and Îp = 1 bar. However, proper drain selection depends on condensate load and application: manual or semi-automatic (RMSA) drains are suitable for low condensate flow, while automatic (SAC, RA) drains are recommended for higher or variable condensate at continuous operation. Ensure chosen drain is compatible with the selected size (100/200/300) and rated for the supply pressure (up to 15 bar) and operating temperature (â¤ +50Â°C) to maintain optimal performance and specified flow rates.

Can the Compressed air fine filter D 100 - 200 - 300, without end plates, SKILLAIRÂ® series maintain 99.97% at 0.01 Âµm across all sizes?

Yes. The Compressed air fine filter D 100 - 200 - 300, without end plates, SKILLAIRÂ® series is specified with a filtration degree of 99.97% at 0.01 Âµm. That performance rating applies to the seriesâ offered sizes (100, 200, 300). Note that effective achievement of this efficiency depends on correct selection and installation, adherence to specified supply pressure (up to 15 bar depending on size/type of drain), operating temperature (â¤ +50Â°C), and appropriate condensate drain and flow conditions (size 100: 230 l/min, size 200: 360 l/min, size 300: 500 l/min at 6 bar inlet, Îp = 1 bar).

Compressed air fine filter D 100 – 200 – 300, without end plates, SKILLAIR® series

Air preparation elements (FRL), All products/

Additional information

Maximum operating temperature [°C]	50
Standard length [m]	10

SKILLAIR® D series filter, without end plates, is used for the precise removal of liquid and solid contaminants contained in compressed air. Size: 100, 200, 300. Filtration degree: 99.97% at 0.01 µm. Supply pressure: up to 15 bar, depending on size and type of drain. Operating temperature: up to +50°C. Condensate drain: manual/semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 230 l/min – size 100, 360 l/min – size 200, 500 l/min – size 300 (at an inlet pressure of 6 bar Δp = 1 bar).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-3288001A	Exact filter D 100 RMSA (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-3288002A	Exact filter D 100 SAC (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-3488001A	Precision filter D 200 RMSA (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-3488002A	Exact filter D 200 SAC (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-4488001A	Exact filter D 300 RMSA (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-4488002A	Exact filter D 300 RA (SKILLAIR) without end plates.	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

SKILLAIR® D series filter, without end plates, is used for the precise removal of liquid and solid contaminants contained in compressed air. Size: 100, 200, 300. Filtration degree: 99.97% at 0.01 µm. Supply pressure: up to 15 bar, depending on size and type of drain. Operating temperature: up to +50°C. Condensate drain: manual/semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 230 l/min – size 100, 360 l/min – size 200, 500 l/min – size 300 (at an inlet pressure of 6 bar Δp = 1 bar).