Is the 90Â° tube end with UNF GZ, steel, type 52214 compatible with hose type 3055 for air conditioning systems?

Yes. The 90Â° tube end with UNF GZ, steel, type 52214 is described specifically as a 90Â° tube fitting with external UNF thread for hose for air conditioning type 3055, material steel. That description indicates direct compatibility: the fitting is intended for hose type 3055 and uses an external UNF (GZ) thread, so it will mate correctly with the specified hose and mounting configuration for air conditioning systems, provided thread size and sealing method match your systemâs requirements.

Can the 90Â° tube end with UNF GZ, steel, type 52214 withstand refrigerant pressures used with hose type 3055 in AC systems?

Yes. The 90Â° tube end with UNF GZ, steel, type 52214 is designed for use with hose type 3055 in air-conditioning systems and, being made of steel with an external UNF thread, is suitable to withstand typical refrigerant pressures encountered in such systems. Ensure compatibility by confirming the specific refrigerant and system maximum working pressure (MWP) against the hose 3055 rating and any applicable standards; if both components share equal or higher MWP ratings and proper assembly (correct sealing, torque, and fittings), the 90Â° tube end type 52214 will handle the refrigerant pressures safely.

Does the 90Â° tube end with UNF GZ, steel, type 52214 require specific sealing for hose type 3055 in AC systems?

90Â° tube end with UNF GZ, steel, type 52214 does require specific sealing considerations when used with hose type 3055 in AC systems. Explanation: - The fitting has an external UNF (UNF GZ) thread; UNF threaded connections typically rely on a mechanical thread seal plus an additional sealing method (sealant, O-ring, or gasket) depending on the mating component design. - Hose type 3055 for air conditioning commonly uses fittings that require either a thread sealant compatible with refrigerants and lubricants or an appropriate O-ring/metal-to-metal contact surface to ensure leak-tightness under AC pressures and temperatures. - Therefore, sealing must match the mating counterpart: if the mating part provides a port with an integral O-ring or cone seat designed for a metal-to-metal seal, no additional thread sealant may be needed; if the mating port is a plain threaded port, a refrigerant-compatible thread sealant or PTFE tape rated for refrigerant service (applied correctly and sparingly) or a sealing washer should be used. - Always use sealing materials compatible with the refrigerant and system oil, and follow manufacturer torque and installation instructions. If available, consult the hose 3055 and fitting 52214 datasheets or supplier recommendations for the approved sealing method.

90° tube end with UNF GZ, steel, type 52214

Additional information

Material	CS – steel (cast iron)

90° tube fitting with external UNF thread, for hose for air conditioning type 3055. Material: steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
BU-52214-06-06-S	End fitting 90° GZ 5/8" tube, hose 5/16", steel	-	35	In stock	Enquiry
BU-52214-08-08-S	End fitting 90° GZ 3/4" tube, hose 13/32", steel	-	35	In stock	Enquiry
BU-52214-10-10-S	End fitting 90° GZ 7/8" tube, hose 1/2", steel	-	35	In stock	Enquiry
BU-52214-12-12-S	End 90° GZ 1.1/16" tubular, hose 5/8", steel	-	35	In stock	Enquiry