Is the 90Â° adjustable angle fitting ORFS with carbon steel metric socket, type WE-MG compatible with standard ORFS hoses and fittings?

Yes. The 90Â° adjustable angle fitting ORFS with carbon steel metric socket, type WE-MG is compatible with standard ORFS hoses and fittings that use the ORFS (O-Ring Face Seal) sealing principle. The key compatibility points: - Sealing type: It uses an O-ring face seal with washer (ORFS), so it will mate correctly to standard ORFS counterparts that rely on the same O-ring face seal design. - Thread/interface: The product description specifies an external metric thread (carbon steel metric socket) . as long as the mating ORFS part accepts the same metric external thread size/type, mechanical connection will be correct. - Material and plating: Made of carbon steel, galvanized, which is common and generally compatible with standard ORFS components; ensure galvanic compatibility with the mating part if dissimilar metals are used. - Adjustability: The 90Â° adjustable feature does not affect seal compatibility; it simply allows orientation adjustment after assembly. Recommendation: Verify that the specific metric thread size and wrench/face dimensions of your standard ORFS hose/fitting match the WE-MG thread specifications and that an appropriate ORFS O-ring (material and size) is used for your fluid and pressure requirements.

Does the 90Â° adjustable angle fitting ORFS with carbon steel metric socket, type WE-MG require a specific torque for the external metric thread to ensure O-ring sealing?

Yes. The 90Â° adjustable angle fitting ORFS with carbon steel metric socket, type WE-MG requires a specific tightening torque for the external metric thread to compress the O-ring properly and ensure a reliable seal. Proper torque prevents under-tightening (leakage) and over-tightening (O-ring damage or thread distortion). Use the manufacturerâs recommended torque values for the specific thread size and material; if not provided, follow standard torque tables for carbon steel metric threads with elastomer O-rings, and apply lubricant if specified. Always inspect the O-ring and washer, use a calibrated torque wrench, and perform a pressure/leak test after assembly.

Can the 90Â° adjustable angle fitting ORFS with carbon steel metric socket, type WE-MG be used in hydraulic systems with aggressive fluids?

The 90Â° adjustable angle fitting ORFS with carbon steel metric socket, type WE-MG is made of carbon steel with a galvanized (zinc-plated) finish and uses an O-ring seal with washer. These material and sealing choices determine its suitability for aggressive fluids: - Carbon steel (galvanized) offers good mechanical strength and general corrosion resistance, but the zinc coating and base steel are vulnerable to many aggressive media (strong acids, alkalis, chlorinated solvents, some hydraulic fluids with high water content or corrosive additives). Prolonged exposure can cause coating degradation, pitting and accelerated corrosion of the substrate. - The O-ring material (not specified in the description) is critical: compatibility with aggressive fluids varies widely between elastomers (NBR, FKM/Viton, EPDM, etc.). Without a specified O-ring compound you cannot assume chemical resistance to aggressive fluids. Conclusion: The 90Â° adjustable angle fitting ORFS with carbon steel metric socket, type WE-MG is not generally recommended for use with aggressive fluids unless you verify two things: (1) the specific aggressive fluidâs compatibility with galvanized carbon steel, and (2) the exact O-ring material is compatible with that fluid. For aggressive or corrosive hydraulic media, prefer fittings made of corrosion-resistant materials (stainless steel, special coatings) and confirmed O-ring elastomers rated for the fluid.

90° adjustable angle fitting ORFS with carbon steel metric socket, type WE-MG

Additional information

Material	CS – steel (cast iron)

Adjustable 90° angle fitting ORFS with external metric thread (O-ring seal with washer), type WE-MG. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HO-WE-09-MG-10	90° adjustable fitting GZ M10x1 - GZ ORFS 9/16"-18	-	315	In stock	Enquiry
HO-WE-09-MG-12	90° adjustable fitting GZ M12x1.5 - GZ ORFS 9/16"-18	-	315	In stock	Enquiry
HO-WE-11-MG-14	90° adjustable fitting GZ M14x1.5 - GZ ORFS 11/16"-16	-	315	In stock	Enquiry
HO-WE-11-MG-16	90° adjustable fitting GZ M16x1.5 - GZ ORFS 11/16"-16	-	315	In stock	Enquiry
HO-WE-13-MG-16	90° adjustable fitting GZ M16x1.5 - GZ ORFS 13/16"-16	-	315	In stock	Enquiry
HO-WE-13-MG-18	90° adjustable fitting GZ M18x1.5 - GZ ORFS 13/16"-16	-	315	In stock	Enquiry
HO-WE-13-MG-22	90° adjustable fitting GZ M22x1.5 - GZ ORFS 13/16"-16	-	250	In stock	Enquiry
HO-WE-16-MG-18	90° adjustable fitting GZ M18x1.5 - GZ ORFS 1"-14	-	315	In stock	Enquiry
HO-WE-16-MG-22	90° adjustable fitting GZ M22x1.5 - GZ ORFS 1"-14	-	250	In stock	Enquiry
HO-WE-16-MG-27	90° adjustable fitting GZ M27x2 - GZ ORFS 1"-14	-	250	In stock	Enquiry
HO-WE-19-MG-22	90° adjustable fitting GZ M22x1.5 - GZ ORFS 1.3/16"-12	-	250	In stock	Enquiry
HO-WE-19-MG-27	90° adjustable fitting GZ M27x2 - GZ ORFS 1.3/16"-12	-	250	In stock	Enquiry
HO-WE-19-MG-33	90° adjustable fitting GZ M33x2 - GZ ORFS 1.3/16"-12	-	160	In stock	Enquiry
HO-WE-23-MG-27	90° adjustable fitting GZ M27x2 - GZ ORFS 1.7/16"-12	-	250	In stock	Enquiry
HO-WE-23-MG-33	90° adjustable fitting GZ M33x2 - GZ ORFS 1.7/16"-12	-	160	In stock	Enquiry
HO-WE-23-MG-42	90° adjustable fitting GZ M42x2 - GZ ORFS 1.7/16"-12	-	160	In stock	Enquiry
HO-WE-27-MG-42	90° adjustable fitting GZ M42x2 - GZ ORFS 1.11/16"-12	-	160	In stock	Enquiry
HO-WE-27-MG-48	90° adjustable fitting GZ M48x2 - GZ ORFS 1.11/16"-12	-	160	In stock	Enquiry
HO-WE-32-MG-48	90° adjustable fitting GZ M48x2 - GZ ORFS 2"-12	-	160	In stock	Enquiry