Is the 45Â° tube end with GW UNF, steel, type 52705 compatible with hose for air conditioning type 3055?

Yes. The 45Â° tube end with GW UNF, steel, type 52705 is compatible with hose for air conditioning type 3055. The product description states it is a 45Â° tube end with internal UNF thread specifically for hose for air conditioning type 3055 and is made of steel, which indicates it was designed to mate with that hose type. Ensure matching UNF thread size and sealing requirements (o-rings or ferrules) per the hose and system specifications before assembly.

Does the 45Â° tube end with GW UNF, steel, type 52705 meet sealing requirements for hose for air conditioning type 3055?

No - the 45Â° tube end with GW UNF, steel, type 52705 does not meet sealing requirements for hose for air conditioning type 3055. The description states it is a 45Â° tube end with internal UNF thread for hose type 3055, material steel, but it does not specify that it includes the required sealing features (seal face geometry, Oâring, bonded washer, or specified sealing standard). Without explicit sealing design or confirmation of compatibility with type 3055 sealing requirements, you cannot assume it meets sealing criteria. Recommend verifying manufacturer documentation or selecting a tube end explicitly certified for hose type 3055 sealing.

Can the 45Â° tube end with GW UNF, steel, type 52705 be used with hose for air conditioning type 3055 under high-pressure conditions?

No. not recommended without verification of pressure ratings and compatibility. Explanation: The 45Â° tube end with GW UNF, steel, type 52705 is described only as a 45Â° tube end with internal UNF thread, for hose for air conditioning type 3055, made of steel. That description confirms geometric and thread compatibility with hose type 3055 but does not state working pressure, burst pressure, or sealing method. High-pressure service requires matched, rated components: the hose assembly (type 3055), the fitting (type 52705), and any seals must each be rated for the intended maximum operating pressure plus safety margin and meet applicable standards (e.g., SAE, ISO). Additionally, material compatibility, thread engagement, torque/specs, and correct installation (crimping/swaging or specific coupling method) are critical. Recommendation: Consult the manufacturerâs technical datasheets for both 45Â° tube end with GW UNF, steel, type 52705 and hose for air conditioning type 3055 to confirm maximum working pressure, burst pressure, and recommended assembly method. If datasheets are unavailable, contact the manufacturer or supplier for explicit confirmation before using in high-pressure applications.

45° tube end with GW UNF, steel, type 52705

Additional information

Material	CS – steel (cast iron)

45° tube end with internal UNF thread, for hose for air conditioning type 3055. Material: steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
BU-52705-06-06-S	End fitting 45° pipe thread 5/8", hose 5/16", steel	-	35	In stock	Enquiry
BU-52705-06-08-S	End. 45° pipe GW 5/8", hose 13/32", steel	-	35	In stock	Enquiry
BU-52705-08-08-S	End. 45° pipe GW 3/4", hose 13/32", steel	-	35	In stock	Enquiry
BU-52705-08-10-S	End 45° pipe thread 3/4", hose 1/2", steel	-	35	In stock	Enquiry
BU-52705-10-10-S	End fitting 45° pipe GW 7/8", hose 1/2", steel	-	35	In stock	Enquiry
BU-52705-10-12-S	End. 45° pipe GW 7/8", hose 5/8", steel	-	35	In stock	Enquiry
BU-52705-10-14-S	End fitting 45° pipe thread 7/8", hose 3/4", steel	-	35	In stock	Enquiry
BU-52705-12-12-S	End. 45° pipe GW 1.1/16", hose 5/8", steel	-	35	In stock	Enquiry
BU-52705-12-14-S	End. 45° pipe thread 1.1/16", hose 3/4", steel	-	35	In stock	Enquiry