Is the Hose end 90Â° to hose with GZ BSP, PP plastic, PVDF, series 1+ type EM compatible with silicone and PTFE hoses at 16 bar working pressure?

Yes. The Hose end 90Â° to hose with GZ BSP, PP plastic, PVDF, series 1+ type EM Format is specified for use with flexible smooth-walled unreinforced hoses made of silicone and PTFE and has a working pressure of 16 bar. Both the listed hose materials (silicone and PTFE) and the stated working pressure match the product description, and the body materials (PP plastic or PVDF) are compatible with common laboratory and chemical applications. Ensure the specific hose inner diameter and fitting size match the EM Format fitting and confirm chemical compatibility for your fluid and temperature conditions before use.

Can the Hose end 90Â° to hose with GZ BSP, PP plastic, PVDF, series 1+ type EM be autoclaved for sterilization without damaging PP or PVDF materials?

Hose end 90Â° to hose with GZ BSP, PP plastic, PVDF, series 1+ type EM: PVDF (polyvinylidene fluoride) is highly resistant to autoclaving (121â134Â°C, saturated steam) and is commonly used in sterilizable lab and medical components. Polypropylene (PP) has more limited heat resistance; repeated autoclaving at 121Â°C can cause softening, warping or loss of mechanical properties over time, though occasional single autoclave cycles may be tolerated depending on grade. Given intended industries and working pressure (16 bar), PVDF parts are suitable for steam sterilization; PP parts are at risk of damage with repeated autoclaving. If sterilization must be frequent, choose PVDF or validate PP with manufacturer for specific polymer grade and sterilization protocol.

Does the Hose end 90Â° to hose with GZ BSP, PP plastic, PVDF, series 1+ type EM resist common lab chemicals like acids and bases?

Hose end 90Â° to hose with GZ BSP, PP plastic, PVDF, series 1+ type EM is designed for broad laboratory and industrial use and is made of polypropylene (PP) or PVDF. Both materials offer good chemical resistance: PVDF (polyvinylidene fluoride) resists a wide range of strong acids, bases and solvents and is generally suitable for common lab chemicals; PP resists many acids and bases but is less resistant than PVDF to strong oxidizers, some solvents and high temperatures. The fitting is intended for flexible smooth-walled unreinforced hoses of materials such as PVC, PA, PUR, PTFE, PFA, FEP, FKM, silicone and TYGONÂ®, and rated to 16 bar working pressure. Conclusion: Yes. in PVDF construction the Hose end 90Â° to hose with GZ BSP, PP plastic, PVDF, series 1+ type EM will resist most common laboratory acids and bases. In PP construction it will resist many common acids and bases but may be vulnerable to strong oxidizers, aggressive solvents or conditions outside PPâs compatibility range. For specific chemicals, concentrations and temperatures, confirm compatibility with manufacturer chemical-resistance data before use.

Hose end 90° to hose with GZ BSP, PP plastic, PVDF, series 1+ type EM

All products, Low-pressure fittings and adapters/

Additional information

Material	P – material (plastic)

90° hose fitting with GZ BSP, type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The design allows for multiple installations without the need for tools. It is intended for flexible smooth-walled unreinforced hoses made of PVC, PA, PUR, PTFE, PFA, FEP, FKM, silicone, and TYGON^® hoses. Material: polypropylene, PVDF. Working pressure: 16 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EM-1P200MG4018PP	90° fitting (series 1+) with GZ BSP 1/8", hose 4x6 mm, polypropylene	4	16	In stock	Enquiry
EM-1P200MG4018PV	90° fitting (series 1+) with GZ BSP 1/8", hose 4x6 mm, PVDF	4	16	In stock	Enquiry
EM-1P200MG4314PP	90° fitting (series 1+) with GZ BSP 1/4", hose 6x8 mm, polypropylene	6	16	In stock	Enquiry
EM-1P200MG4314PV	90° fitting (series 1+) with GZ BSP 1/4", hose 6x8 mm, PVDF	6	16	In stock	Enquiry
EM-1P200MG4538PP	90° fitting (series 1+) with GZ BSP 3/8", hose 8x10 mm, polypropylene	8	16	In stock	Enquiry
EM-1P200MG4812PP	90° fitting (series 1+) with GZ BSP 1/2", hose 10x12 mm, polypropylene	10	16	In stock	Enquiry
EM-1P200MG4812PV	90° fitting (series 1+) with GZ BSP 1/2", hose 10x12 mm, PVDF	10	16	In stock	Enquiry
EM-1P200MG4838PP	90° fitting (series 1+) with GZ BSP 3/8", hose 10x12 mm, polypropylene	10	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° hose fitting with GZ BSP, type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The design allows for multiple installations without the need for tools. It is intended for flexible smooth-walled unreinforced hoses made of PVC, PA, PUR, PTFE, PFA, FEP, FKM, silicone, and TYGON^® hoses. Material: polypropylene, PVDF. Working pressure: 16 bar.