Is the Straight end fitting for hose with BSP GW series 2N type EM compatible with PTFE, FEP, PFA, glass, metal, PA and PE tubes?

Yes. The KoÅcÃ³wka prosta do wÄÅ¼a z GW BSP z tworzywa PP, PVDF, seria 2N typ EM is compatible with PTFE, FEP, PFA, glass, metal, polyamide (PA) and polyethylene (PE) tubes. It is designed specifically for rigid hoses and tubes made of those materials. Locking is via a locking ring and nut, and sealing is provided by a PTFE ring, which prevents cross-sectional reduction and preserves media flow. Materials: polypropylene (PP) and PVDF; working pressure: 10 bar.

Can the Straight end fitting for hose with BSP GW series 2N type EM be sterilized for use in medical and pharmaceutical environments?

KoÅcÃ³wka prosta do wÄÅ¼a z GW BSP z tworzywa PP, PVDF, seria 2N typ EM can be sterilized for many medical and pharmaceutical applications, but suitability depends on the sterilization method and material limits. Made from polypropylene (PP) or PVDF with a PTFE sealing ring and designed for fluoropolymer, glass, metal and PE hoses, it tolerates common sterilization methods as follows: - Autoclaving (steam): PVDF and PTFE seal have good steam resistance; PP is more limited-repeated high-temperature autoclaving may deform PP. Check specific PP grade temperature limits. - Chemical sterilants (e.g., ethanol, hydrogen peroxide, peracetic acid): Compatible with PVDF and PTFE; PP generally resistant to many chemicals but verify concentration and contact time. - Gamma or e-beam irradiation: PVDF and PTFE handle irradiation better than PP, which can embrittle or degrade depending on dose. Working pressure 10 bar is maintained if materials and assembly are intact. For sterile medical/pharmaceutical use, validate sterilization cycle, material certificates, and perform compatibility and extractables/leachables testing per applicable regulations before use.

Does the KoÅcÃ³wka prosta do wÄÅ¼a z GW BSP z tworzywa PP, PVDF, seria 2N typ EM resist common lab chemicals?

KoÅcÃ³wka prosta do wÄÅ¼a z GW BSP z tworzywa PP, PVDF, seria 2N typ EM. resist common lab chemicals? Yes. KoÅcÃ³wka prosta do wÄÅ¼a z GW BSP z tworzywa PP, PVDF, seria 2N typ EM is suitable for resistance to many common laboratory chemicals. Konstrukcja z materiaÅÃ³w PP (polypropylene) i PVDF (polyvinylidene fluoride), uszczelnienie z PTFE oraz kompatybilnoÅÄ z przewodami z fluoropolimerÃ³w (PTFE, FEP, PFA) i szkÅa wskazujÄ na dobrÄ odpornoÅÄ chemicznÄ. PVDF oferuje szerokie spektrum odpornoÅci na kwasy, zasady i rozpuszczalniki organiczne; PP dobrze znosi alkaliczne Årodowiska i czÄÅÄ rozpuszczalnikÃ³w, choÄ jest mniej odporny niÅ¼ PVDF wobec silnych utleniaczy i niektÃ³rych agresywnych rozpuszczalnikÃ³w organicznych. Ograniczenia: nie wszystkie substancje laboratoryjne bÄdÄ kompatybilne z PP. silne utleniacze (np. stÄÅ¼ony kwas azotowy, nadtlenki), niektÃ³re chlorowane rozpuszczalniki i bardzo gorÄce, agresywne mieszaniny mogÄ atakowaÄ PP. PVDF ma szerszÄ odpornoÅÄ, ale teÅ¼ ma limity przy ekstremalnych warunkach (bardzo wysokie temperatury, stÄÅ¼one fluorowodory itp.). Praktyczna wskazÃ³wka: dla konkretnego medium i warunkÃ³w (stÄÅ¼enie, temperatura, ciÅnienie do 10 bar) sprawdÅº tabelÄ kompatybilnoÅci chemicznej dla PP, PVDF i PTFE. JeÅli obsÅugujesz silnie korozyjne lub agresywne chemikalia, wybierz PVDF lub PTFE jako materiaÅ przewodu/uszczelnienia albo zweryfikuj zgodnoÅÄ przed uÅ¼yciem.

Końcówka prosta do węża z GW BSP z tworzywa PP, PVDF, seria 2N typ EM

All products, Low-pressure fittings and adapters/

Additional information

Material	P – material (plastic)

Straight end fitting for hose with BSP GW series 2N type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Designed for rigid hoses and tubes made of fluoropolymers PTFE, FEP, PFA, glass tubes, metal, polyamide (PA), and tubes made of polyethylene (PE). Hose/tube locking in the fitting occurs via a locking ring and nut. Sealing of the connection is ensured by a PTFE ring. This solution eliminates cross-sectional reductions in the hose, which consequently does not affect the flow of media. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EM-2N100FG3814PP	Straight end (series 2N) with GW BSP 1/4", hose 4 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100FG3814PV	Straight end (series 2N) with GW BSP 1/4", hose 4 mm, PVDF	-	10	In stock	Enquiry
EM-2N100FG3818PP	Straight fitting (series 2N) with GW BSP 1/8", hose 4 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100FG3818PV	Straight fitting (series 2N) with GW BSP 1/8", hose 4 mm, PVDF	-	10	In stock	Enquiry
EM-2N100FG4014PP	Straight end (series 2N) with GW BSP 1/4", hose 6 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100FG4014PV	Straight fitting (series 2N) with GW BSP 1/4", hose 6 mm, PVDF	-	10	In stock	Enquiry
EM-2N100FG4018PP	Straight fitting (series 2N) with GW BSP 1/8", hose 6 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100FG4018PV	Straight fitting (series 2N) with GW BSP 1/8", hose 6 mm, PVDF	-	10	In stock	Enquiry
EM-2N100FG4312PP	Straight end (series 2N) with BSP 1/2", hose 8 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100FG4312PV	Straight end (series 2N) with GW BSP 1/2", hose 8 mm, PVDF	-	10	In stock	Enquiry
EM-2N100FG4338PP	Straight end (series 2N) with GW BSP 3/8", hose 8 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100FG4338PV	Straight end (series 2N) with GW BSP 3/8", hose 8 mm, PVDF	-	10	In stock	Enquiry
EM-2N100FG4512PP	Straight end (series 2N) with BSP 1/2", hose 10 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100FG4512PV	Straight end (series 2N) with GW BSP 1/2", hose 10 mm, PVDF	-	10	In stock	Enquiry
EM-2N100FG4538PP	Straight end (series 2N) with GW BSP 3/8", hose 10 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100FG4812PP	Straight end (series 2N) with GW BSP 1/2", hose 12 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100FG4812PV	Straight end (series 2N) with GW BSP 1/2", hose 12 mm, PVDF	-	10	In stock	Enquiry
EM-2N100FG5112PV	Straight end (series 2N) with GW BSP 1/2", hose 14 mm, PVDF	-	10	In stock	Enquiry
EM-2N100FG5312PP	Straight end (series 2N) with GW BSP 1/2", hose 16 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100FG5312PV	Straight end (series 2N) with GW BSP 1/2", hose 16 mm, PVDF	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Straight end fitting for hose with BSP GW series 2N type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Designed for rigid hoses and tubes made of fluoropolymers PTFE, FEP, PFA, glass tubes, metal, polyamide (PA), and tubes made of polyethylene (PE). Hose/tube locking in the fitting occurs via a locking ring and nut. Sealing of the connection is ensured by a PTFE ring. This solution eliminates cross-sectional reductions in the hose, which consequently does not affect the flow of media. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.