Delivery hose for saturated steam STEAM STAR® 18 BAR
Strong and very flexible and elastic pressure hose reinforced with two steel braids intended for conveying saturated steam at higher pressure. The inner layer is resistant to high-temperature steam. The outer layer is resistant to high temperature and weather conditions. For steam, use special screw-on fittings designed for steam – precisely matched to the diameter and thickness of the hose. To extend the lifespan, the hose should be emptied of steam after use to avoid the accumulation of condensate. Inner layer: black EPDM rubber. Reinforcement: double steel braid. Outer layer: red micro-perforated EPDM rubber. Working pressure: 18 bar. Operating temperature: from -40°C to +210°C (temporarily up to +230°C).
List of product variants
| Article number | Product variant name | Nominal inner diameter | Working pressure [bar] | Enquiry |
|---|---|---|---|---|
| SO-STEAMSTAR18-10 | STEAMSTAR/18 hose 3/8" (10x19.5 mm) | 10 | 18 | |
| SO-STEAMSTAR18-13 | STEAMSTAR/18 hose 1/2" (12.5x23 mm) | 12 | 18 | |
| SO-STEAMSTAR18-19 | STEAMSTAR/18 hose 3/4" (19x30 mm) | 20 | 18 | |
| SO-STEAMSTAR18-25 | STEAMSTAR/18 hose 1" (25.4x36.8 mm) | 25 | 18 | |
| SO-STEAMSTAR18-32 | STEAMSTAR/18 hose 1.1/4" (31.5x43.5 mm) | 32 | 18 | |
| SO-STEAMSTAR18-38 | STEAMSTAR hose/18 1.1/2" (38x49.5 mm) | 38 | 18 | |
| SO-STEAMSTAR18-51 | STEAMSTAR/18 hose 2" (51x64 mm) | 50 | 18 | |
| SO-STEAMSTAR18-63 | STEAMSTAR/18 hose 2.1/2" (63x83 mm) | 65 | 18 | |
| SO-STEAMSTAR18-76 | STEAMSTAR/18 hose 3" (76x98 mm) | 75 | 18 |
Strong and very flexible and elastic pressure hose reinforced with two steel braids intended for conveying saturated steam at higher pressure. The inner layer is resistant to high-temperature steam. The outer layer is resistant to high temperature and weather conditions. For steam, use special screw-on fittings designed for steam – precisely matched to the diameter and thickness of the hose. To extend the lifespan, the hose should be emptied of steam after use to avoid the accumulation of condensate. Inner layer: black EPDM rubber. Reinforcement: double steel braid. Outer layer: red micro-perforated EPDM rubber. Working pressure: 18 bar. Operating temperature: from -40°C to +210°C (temporarily up to +230°C).
Additional information
| Material | EPDM – ethylene-propylene-diene rubber |
|---|---|
| Maximum operating temperature [°C] | 210 |
| Minimum operating temperature [°C] | -40 |
| Vacuum resistance | no |
| Standard length [m] | 60 |
| Reinforcement | 2 steel braids |
Additional information
| Material | EPDM – ethylene-propylene-diene rubber |
|---|---|
| Maximum operating temperature [°C] | 210 |
| Minimum operating temperature [°C] | -40 |
| Vacuum resistance | no |
| Standard length [m] | 60 |
| Reinforcement | 2 steel braids |
