Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA connector electrical 30 mm standard for valve PIV, for mounting plate. diameter cable: PG11. color: black or transparent.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling plug 1/2" with a thread external. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug WEO with fittings for hose for use in hydraulic systems where there is not enough space, to install line in the traditional way. plug with an O-ring for use with socket swivel CJ-H-14860... intended for hoses type 1SN, 2SN, 1SC, 2SC. Working pressure: 350 bar (for a hose size up to 3/4"), 250 bar (for a hose size 1"). Material: case-hardened steel. Operating temperature: from -30°C to +100°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLOCTITE 243 to average removable adhesive anaerobic giving for all metal connections threaded. prevents loosening parts subjected vibrations, such as screws mounting, a nut or pins. works on all metals, also on substrates passive (e.g.steel stainless, aluminum and surfaces plated). features tolerance on light contaminants oils industrial, e.g. oils engine, oils prevents corrosion and coolants. color: blue. Maximum thread diameter: for M36. Working temperature range: od -55°C up to +180°C. Breakaway torque for the screw: 26 Nm. Time to reach initial strength: 15-30 min (depending on material). Time to reach full strength: 3-24 h (depending on material). certificates: certificate P1 NSF Nr: 123000. Packaging - container 10 ml or 50 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN quick-coupling socket cap, series 232 with a chain protecting against dirt and damage. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap with a thread internal trapezoidal compliant with the DIN EN 12713 standard, Cover in 100% with threads in containers IBC various manufacturers. Material: polypropylene. gasket: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA bracket swivel intended for mounting on wall ECODORA series E-304, E-354 and E-434. Material: steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle adjustable type FPB used in systems hydraulic as element control intensity flow. regulation flow realised is using a knob. permissible direction flow: A → A1, A1 → A. Material: steel carbon, galvanized (body), plastic (knob). sealing: NBR. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality high-pressure ball valve two-way closing intended for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. Intended for in-line or panel mounting. valve is characterized high tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. Each valve is pressure-tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Valves with pneumatic actuator are available. Available in two pressure versions: with a maximum working pressure of 206 bar and 413 bar respectively. Material the body: steel AISI 316 (ASTM A351 CF8M, cast) - for version 206 bar; steel AISI 316 (ASTM A-276, forging) - for version 413 bar. For the low-pressure version (206 bar), a brass design is available. Material the ball: steel AISI 316. Material lever: nylon, insert with brass; lever valve standard in color black (Available other color, lever metal, lever with padlock ISLT). sealing the ball and stem: modified PTFE (option PCTFE, PEEK). pressure working (dependent od temperature / material seal - see chart): up to 206 bar (modified PTFE). Operating temperature (dependent od material seal - see chart): from -34°C to +210°C (modified PTFE). connection: BSP female. notes! The ball valves are designed to work in a completely open or completely closed position. The valves have a factory-adjusted gland seal for a pressure of 70 bar. Due to varied working conditions, periodic adjustment of the seal by means of the stem seal screw may be required (after removing the lever). Initial adjustment before starting the installation is recommended by tightening the seal screw by 1/8 to 1/4 turn.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal one-piece ball valve type 2017K of reduced bore and a lock lever, intended for installations industrial. can be used for air, gases, water, water vapor, chemicals, products petrochemical, itp., taking into account chemical resistance material valve and sealing. Working pressure dependent is od temperature use. Material the body: cast steel stainless CF8M. Material the ball: cast steel stainless CF8M. Material lever: steel stainless AISI 304. sealing the ball: PTFE / RTFE. sealing stem: PTFE. connection: BSP female. Operating temperature: from -20°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA set of standard jaws for a FINN-POWER type P16 crimping press. Material: surface-hardened steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA GUILLEMIN coupling with a female BSP thread intended for industrial and reloading installations for substances, bulk materials and granulates. Not suitable for transferring steam and gases. The coupling has a symmetrical design of the connection part. Made in accordance with the EN 14420-8/NF-E-29572 standard. Material: steel AISI 316. Working pressure: 16 bar. Sealing: black rubber FKM-Viton. Operating temperature: from -10°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal A reel for water and air, in the set with a hose, PVC, intended for mounting na wall. arm guiding has five position assembly, co allows mounting drum in each convenient position. solid coupling swivel, being path flow medium, fitting and ferrules made are with brass. A spring rewind specially matched for length hose, with rounded edges, allows na increase service life mechanism. used in workshops automotive, repair, stations gasoline, gardens, plants paint, itp. Material: steel carbon painted powder. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter type DST with a metric male thread, 60° cone seal. Material: carbon steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling with a thread external NPT, with valve and without valve shut-off, intended for installations water, chemical, pneumatic, itp. Compared to massive traditional couplings with balls and a locking sleeve, it has a very low weight. The ergonomic shape and large release button provide convenient handling and ease of use. A very efficient valve allows large flow rates and minimal leakage. This coupling also allows slight rotation of the connected hose, which prevents it from twisting and accidental disconnection. Applications: chemical photographic processes, filling installations for batteries and accumulators, sprayers, pneumatic installations and non-freezing liquids, etc.. It is characterized by high mechanical strength and chemical resistance. They are suitable for autoclaving. Length L - total length. Material: polysulfone. Sealing: O-ring EPDM. Working pressure: for 8.6 bar. Operating temperature: from -40°C to +138°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible hose o thick wall, intended for discharge chips, bulk materials, granulate etc. Dla all types industry, in particular often used for discharge chips and other particles solid in industry wood, furniture, ceramic, plastics. thick wall and dense spiral reinforcing ensure high parameters pressure. very smooth inside, little compressible and flexible - also in low temperatures. O excellent resistance to abrasion, resistant also on microbes and hydrolysis. Not toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: ECO – version standard, ECO SE – version with material flame-retardant (UL94 V-2), ECO AS – version permanently antistatic (ISO 8031: R 9 Ω, TRGS 727 (6.4.2.4): R 8 Ωm, directive 2014/34/EU (ATEX): It can be used in defined zones hazard explosion po analysis risk, ECO SE AS – version antistatic and flame-retardant (Available on special order). hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 1.4 mm. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow with BSPT male thread, type A15, intended for connecting pneumatic components (including hoses) to one another. A tight connection usually requires additional sealing: PTFE tape or sealant for a tapered thread, or aluminum or copper washers for a parallel thread. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow through-flow, type R21, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for installation water, water sea, cooling also of agents for treatment, water drinking, acids and bases o small concentrations, solutions salts, esters and ketones. Nie are suitable for oils mineral, water cooling of agents anti-corrosion containing oil, oily air. marked na bellows single red stripe. Inner layer: butyl rubber (IIR) / EPDM. Reinforcement: nylon cord. Outer layer: rubber EPDM. Flanges: galvanized carbon steel. Operating temperature: from -40°C to +100°C (momentarily +120°C depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for work in installations in which the medium consists of mineral oils, vegetable and animal fats, oils in aerosol, water with the addition of anti-corrosion substances. Inner layer: rubber NBR. Reinforcement: nylon cord. Outer layer: rubber CR. Flanges: galvanized carbon steel. Operating temperature: from -30°C to +90°C (depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for use in installations, in which medium constitutes hot and cold water, water with addition agents treating, industrial, sea, glycol, weak acids, principles, esters and ketones. Nie serves for conveying media containing oil. BV certificate (Bureau Veritas). Inner layer: rubber EPDM. Reinforcement: nylon cord. Outer layer: rubber EPDM. Flanges: galvanized carbon steel. Operating temperature: from -30°C to +90°C (depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight INTERLOCK with metric male thread, 24° cone, series heavy, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCream protective for hands - is traditional agent protection leather in time use with contamination oily and greasy, a also at strongly adjacent contamination. protects skin during use with oils, grease, varnish, graphite, soot, tar, resin polyester, mass silicone, fiber mineral. Packaging - bucket 1000 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / Details"Y" tee connector for a hose, type NA. Intended for use in control systems, in installations for the transport of gases and liquids, in vacuum installations, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket reducing with a thread internal BSP intended intended for use in pipe connections of industrial installations. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA clamp tubular type UNI-FLEX S Intended for connecting and repairs pipes metal and plastic (connection axially not fixed, flexible - only with gasket rubber). Application: water, fluids based on water, sewage, light chemicals, air. version material: steel AISI 316Ti (housing, screws - Class A4-80, solid pins). sealing: EPDM rubber. Operating temperature: od -30°C up to +125°C. pressure nominal: PN 16 (Class pressure working for applications in industry shipbuilding, marine; Safety factor 4:1, assuming positive result single-use testing pressure four times greater, ale po which A clamp not can be used again). maximum Working pressure: 25 bar (for remaining applications industrial and conditions static; factor safety 1.5:1, assuming positive result testing pressure 150% maximum pressure working, po which A clamp can be further repeatedly used). value pressures working apply for mounting clamps on round tubes steel o minimum wall thickness wall, mounting in accordance with instructions and tightening a wrench torque given on a clamp torque). Available version with incomplete pins, version "L" (example index: UN-FLEX-L-...).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick A rubber cover limiting the possibility of the hose kinking at the fitting and limiting the possibility of exceeding the minimum bending radius. Do Applications of standard lines for washing high-pressure DN8, DN10 or DN12. color cover: blue, black, red, grey, yellow.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGLOW to photoluminescent version cover PROTECTOR intended for securing hoses (cables) or bundles hoses against abrasion, impacts and crushing. ensures visibility hoses even in conditions weak lighting. glows over 12 hours and can be charged through any source light. Nie contains harmful materials and halogen. resistant na radiation UV. color: yellow with photoluminescent edges. Material: polyethylene (HDPE) + compound photoluminescent. Operating temperature: from -50°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing closing MKH for couplings transfer TW. Do Applications with a sealing ring MKV. Together they molds an MK coupling. Made in accordance with the EN ISO 14420-6 standard (formerly DIN 28450). Intended for liquids, bulk materials and gases (except liquefied gas and steam). Material: brass. pressure: od -0.8 bar up to 16 bar. Operating temperature: from -20°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure Water gun SG31 with lance extension for applications industrial. Suitable for warm and cold water. The lever mechanism does not require the operator to use much force, which translates into comfortable and pleasant work. part outlet terminated a thread internal M22x1.5. Gun occurs in version of fixed or swivel connection for installations. Housing material: high-strength plastic. Working pressure: up to 280 bar. pressure The permissible: 310 bar. Flow rate: 30 l/min. Operating temperature: up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA gun with rubber nozzle (a nozzle) intended for removing with delicate surfaces all contamination: liquids, fine chips, filings itp. light construction and ergonomic shape ensure easy and convenient use. A gun equipped is in rubber nozzle (a nozzle), which protects sensitive surfaces against scratches and damage during use. mechanism the lever enables precision dosing flowing medium. compliant of the standard OSHA 1910.95 (b) and the directive 2003/10/EC. Material the body: acetal. Material nozzle / nozzle: steel galvanized / NBR. Sealing: NBR. pressure working: 16 bar. Operating temperature: from -10°C to +80°C. flow: 380 l/m (at a pressure of 8 bar). level sound: 85 dB (at a pressure of 8 bar). force blowing: 3.92 N.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlate bottom short for welding for mounting clamp DIN 3015 double complete type 301. Material: steel carbon or steel AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWasher wall for the SPEEDFIT system, used in compressed-air installations. mounted for a wall Fitting angled 90°. on one side terminated coupling na tube (system SPEDDFIT), on the other side thread internal BSP. Material: brass. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA displacement gear pump (hydraulic), TRALE, with external gearing, intended for use in the hydraulic systems of machines and equipment. Connections: threaded BSP. Direction of rotation: right. The stated maximum working pressure applies to continuous operation. Material: body – aluminum, mounting plate and rear cover – cast iron. Sealing: NBR. Medium: L-HM45 type hydraulic oil or equivalent. Fluid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (ambient).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndustrial nozzle for water with adjustable nozzle outlet. ring with rubber EPDM secures against damage mechanical. Available in version long. Material: brass. housing: high-strength plastic (acetal). nozzle: 7 mm or 10 mm. Connection: BSP female. Working pressure: 16 bar. Flow rate: 75 l/min (6 bar) or 150 l/min (6 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe measurement coupling is designed according to the requirements of ISO 15171-2. Used primarily for pressure diagnostics in power hydraulic systems, it can also be used for lubrication, venting, oil sampling and micro-hydraulics. Intended for hydraulic oil and mineral oils, made of carbon steel with a zinc-nickel coating, with NBR seals, with Viton (marked with the letter "V" at the end of the index) and with EPDM (marked with the letters "EA" at the end of the index). Available with a metal cap or a plastic cap. The coupling has the ISO 15171-2 standard M16x2 thread on the measuring end, and an appropriate connection for connection to the hydraulic system. Material: steel with zinc-nickel coating. Working pressure: from 400 bar to 630 bar – depending on the type. Sealing: NBR, Viton, EPDM. Operating temperature: from -30°C to +120°C – NBR (from -30°C to +100°C with a plastic cap), from -20°C to +200°C – Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTubes of seam for applications pressure of stainless steel compliant with the standard EN 10217-7 (DIN 17457). tubes annealed, welded longitudinally TIG, HF or laser o surface smooth, matte, pickled. coefficient weld v = 1.0. tolerances D3 / T3. category tests TC1 or TC2 – depending on batch. With an EN 10204 3.1 material certificate. tubes te are characterized good resistance pressure and can be used na devices pressure subject to the directive pressure (2014/68/UE, PED). Widely used in industry in the construction of installations and pipelines. Material: steel AISI 304/304L (1.4301/1.4307), AISI 316L (1.4404). Standard pipe length (one section): 6 m. Shipped in sections: 1 m or 2 m, longer sections after agreeing on transport costs.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand intended for producing clamps for hoses of any diameter. Standard length: 25 m. Band width: 8 mm or 14 mm. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA MWSCQ silencer with a male thread, used in compressed-air systems to reduce the noise level. The noise reduction that can be achieved by installing a silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the silencer axis, is on average depending on size 35 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Operating temperature: from -10°C to +80°C. pressure working: up to 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee IBC with a thread external BSP, equipped in a gasket and 2x a thread internal BSP. Material: polypropylene. gasket: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
