Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA tee reducing with a thread internal BSP intended for use in pipe connections of industrial installations. Material: steel AISI 316. Working pressure: 10 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality multifunction flexible hose manufactured in Great Britain. intended for water, air and light chemicals. The hose material contains no phthalates, silicone or cadmium and complies with the RoHS and WEEE regulations. In accordance with EU regulations, use for food products is possible after first carrying out the required migration tests using appropriate model fluids simulating the given type of food (the material used to make the hose complies with the requirements of 10/2011/EU and FDA 21). The hose material is self-extinguishing per UL94-V2 and UL94-HB (at a thickness of 3 mm). Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: red (R) or blue (BL) PVC. Working pressure: from 10 bar to 18.3 bar - depending on the diameter hose. Operating temperature: from -20°C to +55°C (momentarily +65°C, temperature bending on cold for -45°C). As the working temperature rises, the hose's working pressure value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket PTFE flat UBW140 for use in most demanding conditions. Ze regard na many unique properties found use we all fields industry. Operating temperature: from -200°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket KMU intended for socket lever coupling KLAUDIA. Material: EPDM. Operating temperature: from -25°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction-delivery intended for conveying liquid chemicals, in this aggressive acids, bases, alcohols and other detergents used for cleaning installations in plants food (selection in accordance with rules acc. to chapter „hoses chemical” this catalogue). Layer inner with UPE compliant with requirements FDA for contact with food. Widely used in industry food, cosmetic, chemical and petrochemical. has copper cable ensuring continuity electrical between fitting hose. Layer outer resistant to abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:11 (type M, resistance between fitting the line R ≤ 100 Ω, guaranteed for lines o length for 40 m). standards and requirements : 1) hoses chemical EN 12115:2011. industry food, contact with food (Layer inner) 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. assembly : smooth ends with a spigot ("tail" into the hose) must be used, without sharp or high barbs that could cut or damage the UPE inner layer after clamping. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: white polyethylene UPE. Reinforcement: cord synthetic, steel spiral. Outer layer: blue EPDM rubber. Working pressure: 16 bar. Vacuum: 0.8 ÷ 0.9 bar - depending on the diameter hose. Operating temperature: -30°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery specially designed for transport water cooling, used at furnaces metallurgical, systems cooling transformers and transducers electric. used in metallurgy steel. Layer outer coated fiber glass resistant to action radiation heat up to +550°C (momentarily) and splashes hot materials. Layer inner insulating (dielectric), R>10 11 Ω, durable on breakdown electrical E≥6000 V/mm, o increased resistance to penetration water and steam at extreme parameters use. minimal radius bends in data technical stated is for pressure above 3 bar. Inner layer: light blue, insulating EPDM rubber. Reinforcement: cord synthetic. Outer layer: EPDM rubber coated fiber glass. Working pressure: 20 bar. Operating temperature: od -35°C up to +120°C, outer up to +550°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hydraulic hose with an extended working-temperature range compared to standard hydraulic hoses. Confirmed hose service life of 400.000 pulse cycles. standards: exceeds EN 853 2SN, ISO 1436-2SN, SAE 100R2S-AT. Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: blue, oil-resistant synthetic rubber resistant to ozone and aging. Working pressure: from 80 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +135°C (momentarily +150°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose made in accordance with technology improvement platinum o exceptional purity, intended for applications biotechnological. resistant to action high temperatures, ozone, radiation radiation, moisture, action conditions atmospheric. Not adsorbs and not absorbs odour ani taste. can be repeatedly sterilised in autoclave a also oxide ethylene or by radiation. Meets FDA requirements, USP kl. VI, ISO 10993, European Pharmacopoeia 3.1.9 and Japanese Pharmacopoeia - section 51. Safety factor 5:1. Material: transparent silicone. Hardness: 50° Shore (A). Density: 1.17 g/cm³. Operating temperature: od -65°C up to +260°C. length hose: 7.62 m, 15.24 m or 30.48 m.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose SUPER FLEX reinforced polyester and a spiral steel intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version made of fluorine rubber (fluorocarbon) is recommended. length standard: 1000 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies + A spiral steel (wall thickness wire 1.2 mm). pressure working: od 2 bar for 8.12 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, glassy transparent, flexible hose free of smell and taste, non-toxic, nie containing phthalates and BPA (bisphenol A). intended for conveying and dispensing products food, in particular products milk, spices, concentrates vitamin, aromas itp. smooth, non-porous surface inner hose eliminates problem settling particles product and growth bacteria. resistant na action alkaline agents cleaning. can be used for pumps peristaltic (service life moderate). meets requirements hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA, NSF-51, NSF-61, 3-A, Japanese #370/1959 and MHLW370(3-D). possible sterilization steam or oxide ethylene. compliant with REACH and California Proposition 65 – nie contains substances hazardous and banned. Length of a full hose roll 15 m (od diameter internal 50.8 mm - 6 m). pressure working determined relative to pressure bursting at factor safety 1:5. Material: PVC (special). Maximum operating temperature: +74°C. temperature brittleness: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE). The inner layer is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale nie very high temperatures), co makes, that hose is wide used in industry chemical and petrochemical. Layer inner with UPE is also compliant with requirements for hoses food, free of phthalates and polycyclic carbon aromatic (PAH), is characterized also low a coefficient friction during flow and prevents deposition medium na walls. This significantly facilitates cleaning and allows use also in the cosmetic, pharmaceutical and food industry. Reinforcement cord synthetic, built-in cable copper for discharge charges electrostatic. Layer outer with resistant chemical rubber EPDM, resistant na abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:2011 (type M, resistance between fitting the line R ≤ 100 Ω, guaranteed for lines o length for 40 m). standards and requirements: hoses chemical: EN 12115:2011. industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP ), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white cream polyethylene UPE. Reinforcement: synthetic cord. Outer layer: black rubber EPDM. pressure working: 16 bar. temperature use: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 116 quick-coupling plug with a female thread and with a valve intended for hydraulic installations at very high pressures. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Supplied as standard with a cap to protect against contamination. Material: hardened steel, galvanized. Sealing: NBR. Flow: 6 l/min (Δp = 4 bar). Nominal diameter: 2.5 mm. Working pressure: 1500 bar (coupling connected). Burst pressure: 3000 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling plug 3/4" with a thread external. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling NiTO of AISI 316 stainless steelL with double fitting for hose. Used in conditions of increased requirements for hygiene and corrosion resistance (e.g. the food industry, hospitals). element from different systems cannot be connected directly, e.g. a 1/2″ socket with a 3/4″ plug. Material: steel AISI 316L. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Material sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling CAMLOCK ERS with smooth fitting for hose made in accordance with the American military standard MIL-C-27487 (A-A-59326). commonly used as coupling transfer, particularly in industry petrochemical. Working pressure: up to 10 bar, depending on the coupling size. Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap for grease nipples type DIN 71412 A, DIN7 1412 B and DIN 71412 C. Material: PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA bracket swivel intended for mounting on wall drums ECODORA series E-544. Material: steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type FPSU used in systems hydraulic as element opening free Flow rate in one direction. Flow rate throttled in direction opposite adjustable is using a knob. standard pressure opening 0.5 bar. permissible direction flow: A → A1 (free), A1 → A (throttled). Material: steel carbon, galvanized (body), steel (spring, ball, knob). sealing: NBR. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SOV L solenoid valve belongs to the LINE ON LINE® family, terminated with Fox series fittings (hose - hose), and can be connected with other products in series or in parallel. Despite its small size, SOV L valves are indirectly electrically actuated, which gives them very high operating parameters. Special polyurethane seals on the spindle ensure a long valve life. The exhaust air can be silenced by a built-in silencer. Each valve has a monostable manual override and an activation indicator – an LED. Working pressure: 2.5 ÷ 7 bar. DC voltage: 24V. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled. Nominal flow: 380 l/min - Ø6, 700 l/min - Ø8 (at an inlet pressure of 6 bar, Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4330 intended for installations industrial. can be used for air, gases, water, chemicals, products petrochemical, itp., taking into account chemical resistance material valve and sealing. Meets the requirements of the PED 2014/68/EU directive. Working pressure dependent is od temperature use. Material the body: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. sealing the ball: PTFE. sealing stem: NBR. connection: BSP female/BSP male. Operating temperature: from -20°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA set for foam and rinsing: A gun NITO I COMBI (NT-53105A1), A bowl na agent cleaning with injector for foam, a hose suction and set nozzles dosing, lance 17 cm with nozzle for rinsing. maximum pressure working: 6 bar. Maximum operating temperature: +40°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA set of standard jaws for a FINN-POWER type P20 crimping press. Material: surface-hardened steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA GUILLEMIN coupling with a hose end, with a lock (mounted with a shell clamp, a clamping ferrule or hose clamps) intended for industrial and reloading installations for substances, bulk materials and granulates. Not suitable for transferring steam and gases. The coupling has a symmetrical design of the connection part. Made in accordance with the EN 14420-8/NF-E-29572 standard. Material: aluminum. Working pressure: 16 bar. Sealing: white NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with BSP male thread, type VSL, with a smooth hose tail, for an EN 14420-3 / DIN 2817 shell clamp (only clamps RS 636... and RS-637...), for assembly onto industrial hoses – e.g., in handling applications. Also available in AISI 316 stainless steel with an E-CTFE fluoropolymer lining and a conductive CF-E-CTFE lining (R 6 Ω), suitable for very aggressive chemical substances. Working pressure: 25 bar (for the AL version – 16 bar, PP – 6 bar). Coupling material: brass (MS), AISI 316 stainless steel (SS), galvanized steel (ST), aluminum (AL), polypropylene (PP). Sealing: flat (face). Operating temperature: from -20°C to +65°C according to EN-14420.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee fitting "L" with female thread (sealing on the face surface) and UNF male thread (O-ring in groove flat on the face surface), type EVL. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete reel intended m. in. for transferring air, cold and hot water and detergents. Do mounting inside and na outside rooms. A spring rewind tested for 30000 cycles winding and unwinding. compliant with the directive ATEX II 3 GD c IIB TX. standard in set found high quality hose polyurethane of spring anti-kink and coupling swivel allowing na free operation with connection for it np. a tool pneumatic. length hose supply: 1.5 m. Material: steel AISI 304. Sealing: Viton. Operating temperature: up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal adapter DM with BSP female thread is designed for connecting lines (hoses with fittings) and components of industrial installations with working pressures up to several dozen bar. Used for all kinds of media: water, air, chemical substances, petrochemical products. Depending on the size, material and manufacturer, the couplings have various shapes of wrench flats. Material: AISI 316 steel. Sealing: flat gasket (PTFE).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn adapter made of high-quality glass-fiber-reinforced polypropylene, food-safe, intended for use with the most popular and most commonly used plastic barrels used for storing raw materials (200 liters). A tight connection on the DIN EN 12713 male thread is ensured by an O-ring gasket. Material: polypropylene glass-fiber-reinforced. gasket: low-density polyethylene (LDPE). Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn automatic drum reel made of acid-resistant steel, intended for cold and hot water, oil, greases and other media. The rewind spring tested for 25000 winding and unwinding cycles. compliant with the directive ATEX 94/9 IIB 2GD c T4 T135C X. A hose stopper included in the set. The reel is not equipped with a hose, which should be ordered separately. A swivel bracket or an additional fixed bracket for quick removal (e.g. in winter) ordered separately. Advantages: swivel connection made of AISI 304 steel, Viton sealing. Material: steel AISI 304. Sealing: Viton. Operating temperature: up to +130°C (without hose).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and very flexible even in low temperature hose suction-delivery, intended for applications general-industrial (in industry, construction, agriculture). It can be used for water, light chemicals, sludge and sewage, agents protection plants, other liquids (without fat, oils and hydrocarbons) as well as for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (non-greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. Reinforcement with a rigid-PVC spiral, impact-resistant, provides good resistance to vacuum and kinking of the hose. A smooth inner surface reduces flow losses and ensures ease of cleaning. The outer surface is lightly corrugated, smooth for small diameters. As a hose reinforced only with a rigid-PVC spiral, without a braid, it shows a certain elongation under pressure, which must be taken into account in use, especially at elevated temperatures. Hose material: green transparent PVC. Reinforcement: rigid-PVC spiral. Working pressure at a temperature of 20°C: from 2 bar to 6.5 bar - depending on the diameter hose. As the working temperature rises, the hose's working pressure value decreases. Operating temperature: from -25°C to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong, thick, flexible hose intended for extraction and conveying abrasive bulk materials, granulates, gravelling roofs, cleaning industrial, abrasive for sandblasting, silos, tankers for bulk materials etc. compliant with the standard DIN 26057 Type 4 (SMARTFLEX® 2.0). Antistatic and flame-retardant, it ensures a high level of work safety. thick wall and dense, thick spiral reinforcing ensures high resistance to vacuum. smooth inside, non-compressible, not very pliable, but flexible, also in low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). After effective two-sided earthing of the spiral, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – in accordance with DIN 4102 class B1. Wall thickness measured between the spiral: 2.0 mm (SMARTFLEX® 2.0), 2.5 mm (SMARTFLEX® 2.5). Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA coil 30 mm Ø8 for solenoid valves CNOMO 060580. Insulation class: F155. Voltage tolerance: -10% for +10%. Protection degree: IP65 EN60529 with a connector. shape connector: DIN 43650 shape A. time use continuous: 100% ED.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, ergonomic nozzle shower color blue for spraying vegetables, fruit, ryb, tables working in industry food, large kitchens and plants catering. made with polyamide (PA66) compliant with FDA, with valve internal of steel stainless. seal with EPDM. Connection: 1/2" BSP female. Working pressure: up to 8 bar. Operating temperature: up to +80°C. weight: 0.26 kg.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling socket 3/4" with a thread internal. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasolines and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 45° with a thread internal BSP intended for use in pipe connections of industrial installations. Material: steel AISI 316. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 180° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 2 bar for 8.12 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA swivel push-in fitting with an O-ring for a high-pressure gun. It prevents the line from breaking. Material: steel carbon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngled connector 90° for a hose, type NA. Intended for use in control systems, in installations for the transport of gases and liquids, in vacuum installations, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance without the head with insulation thermal type MT2 intended for a high-pressure washer. Connections: (inlet) 1/4" BSP male / (outlet) 1/4" BSP male. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThread impregnated Teflon for securing and sealing connections threaded in metal and plastic installations pipe. applied directly with container with built-in blade cutting guarantees speed and cleanliness mounting. Not cures, instant sealing occurs under full pressure. product has approval DVGW/KTW for use in installations gas and with water potable and certificate NSF/ANSI, Standard 61. color: white. Maximum thread diameter: R4". Working temperature range: od -55°C up to +130°C.
