Is the SPEEDFIT wall washer, brass compatible with both tube fittings and BSP threaded connections at 10 bar working pressure?

Yes. The SPEEDFIT wall washer, brass is designed as a 90Â° angled coupling with one side finished for a SPEEDFIT tube fitting and the other side featuring an internal BSP thread. Made of brass and rated for a working pressure of 10 bar at +23Â°C (7 bar at +70Â°C) with an operating temperature range of -20Â°C to +70Â°C, it is compatible with both tube fittings and BSP threaded connections at the specified 10 bar working pressure (at +23Â°C).

Does the SPEEDFIT wall washer, brass support 90Â° tube connection to an internal BSP thread for compressed air use?

Yes. The SPEEDFIT wall washer, brass supports a 90Â° tube connection to an internal BSP thread for compressed air use. It features a 90Â° angled coupling: one side is finished with a SPEEDFIT tube fitting and the other side has an internal BSP thread. Material brass; working pressure up to 10 bar (+23Â°C), 7 bar (+70Â°C); operating temperature â20Â°C to +70Â°C.

Can the SPEEDFIT wall washer, brass maintain seal integrity between a tube fitting and internal BSP thread at 70Â°C?

Yes. the SPEEDFIT wall washer, brass can maintain seal integrity between a tube fitting and the internal BSP thread at 70Â°C, with conditions: - The component is rated for an operating temperature up to +70Â°C and a working pressure of 7 bar at +70Â°C, so the product is designed to function at that temperature/pressure point. - Because one side is a SPEEDFIT tube fitting and the other an internal BSP thread, a proper, compatible tube fitting and correct installation (thread sealing method compatible with brass and BSP, e.g., suitable thread sealant or PTFE tape if required) must be used to ensure a reliable seal. - Ensure system pressure does not exceed 7 bar at +70Â°C and that the installation is free of mechanical stress, misalignment, or vibration that could compromise the joint. If you plan to operate at or near the maximum temperature/pressure limits, verify the specific tube fitting, sealing method and any dynamic loads to ensure long-term integrity.

Washer wall SPEEDFIT, brass

All products, Pneumatic piping systems/

Additional information

Material	B – brass (bronze)

Washer wall for the SPEEDFIT system, used in compressed-air installations. mounted for a wall Fitting angled 90°. on one side terminated coupling na tube (system SPEDDFIT), on the other side thread internal BSP. Material: brass. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
JG-PM15WB	Wall washer 15 mm x 1/2" BSP	-	10	In stock	0 zł		Enquiry
JG-PM22WB	Wall washer 22 mm x 3/4" BSP	-	10	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Washer wall for the SPEEDFIT system, used in compressed-air installations. mounted for a wall Fitting angled 90°. on one side terminated coupling na tube (system SPEDDFIT), on the other side thread internal BSP. Material: brass. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.