Is the Adaptor with metric male thread, carbon steel, type DST compatible with 60Â° cone sealing and external metric thread connections?

Yes. The Adaptor with metric male thread, carbon steel, type DST is compatible with 60Â° cone sealing and external metric thread connections. The product description explicitly states it is a DST type adapter with external metric thread and 60Â° cone sealing, and the material is carbon steel, galvanized.

Can the Adaptor with metric male thread, carbon steel, type DST be used with different torque settings for 60Â° cone sealing on external metric threads?

Adaptor with metric male thread, carbon steel, type DST Format is designed for 60Â° cone sealing on external metric threads. Using different torque settings can be possible but must respect thread and seal requirements: apply sufficient torque to achieve metal-to-metal cone contact without overloading the thread or deforming the 60Â° seat. Because the material is carbon steel (galvanized), recommended torque depends on thread size, pitch, lubrication, and assembly conditions. If manufacturer torque specs are not provided, determine torque by calculating required axial force for proper cone engagement, then convert to torque using thread geometry and friction coefficients, or perform controlled assembly tests. Never exceed the threadâs yield strength; if in doubt, consult the adapter supplier or engineering data to ensure safe, leak-free sealing.

Does Adaptor with metric male thread, carbon steel, type DST require specific lubrication for 60Â° cone sealing on external metric threads?

Adaptor with metric male thread, carbon steel, type DST Format; based on the description (DST type adapter with external metric thread, 60Â° cone sealing. Material: carbon steel, galvanized), specific lubrication for the 60Â° cone sealing on external metric threads is not generally required for the sealing function itself. The 60Â° cone provides metal-to-metal contact that relies on correct thread engagement, surface condition and proper torque rather than a lubricant to achieve the seal. However: - Use of an assembly lubricant or anti-seize compound on the threads is often recommended to ensure accurate torque control, prevent galling of carbon steel threads, and allow future disassembly. Choose a general-purpose anti-seize or thread lubricant compatible with galvanized steel and the operating fluid/temperature. - Avoid viscous sealants or pipe-thread sealants on the cone face; these can interfere with metal-to-metal sealing and compromise the 60Â° seat. - Ensure mating face and thread surfaces are clean, undamaged and free of debris before assembly. Tighten to the manufacturerâs specified torque if provided. - For corrosive or high-pressure applications, select lubricants/anti-seize rated for those conditions and compatible with the system medium. In summary: no special lubricant is needed for the cone seal itself, but apply a compatible thread lubricant or anti-seize to protect threads and ensure proper torque and serviceability, while keeping the cone seating faces clean and free of sealants.

Adaptor with metric male thread, carbon steel, type DST

All products, Low-pressure fittings and adapters/

Additional information

Material	CS – steel (cast iron)

DST type adapter with external metric thread, 60° cone sealing. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EC-122010	DST adapter with GZ M10x1, 60° cone	-	30	In stock	Enquiry
EC-122012	DST adapter with GZ M12x1.5, 60° cone	-	30	In stock	Enquiry
EC-122014	DST adapter with GZ M14x1.5, 60° cone	-	30	In stock	Enquiry
EC-122016	DST adapter with GZ M16x1.5, 60° cone	-	30	In stock	Enquiry
EC-122022	DST adapter with GZ M22x1.5, 60° cone	-	30	In stock	Enquiry