Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. Available on request in micro-perforated version (for gases and air). Installation: contact TUBES INTERNATIONAL®. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: polyurethane. Working pressure: from 200 bar to 425 bar - depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOP shut-off valve series STP-B with plug connections used mainly as a safety valve. When installed on the actuator's supply connections, it allows air flow only in the presence of a pneumatic control signal. The actuator is stopped after a drop in control pressure. Operating pressure: 0.5 ÷ 10 bar. Operating temperature: from -10°C to +60°C. Body material: nickel-plated brass. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ adaptor with external BSP thread intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed flow diameter. With a symmetrical design of the connecting part, allowing for easy connection. Elements with the same hook spacing can be connected. Available in forged version with a working pressure of up to 16 bar and in cast version, characterized by significantly lower strength with a working pressure of up to 6 bar. Material: aluminum. Working pressure: 16 bar (forged connections), 6 bar (cast connections). Seal: white NBR rubber (forged connections), black NBR rubber (cast connections).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight coupling type LET-LOK® for metric tubing intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAsymmetrical straight reducing coupling KRA designed for quick and efficient assembly of suction hoses using BC screw bridge clamps. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure plug type A112 with internal BSP thread, with a rotating nut (60° cone seal). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with external BSP thread (seal on internal 60° cone) and external NPT thread (seal on thread) allowing the connection of quick couplings and UHP hoses to each other, as well as connecting them to UHP connection blocks. Material: black galvanized steel. Working pressure: 1500 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic condensate drain series NEW DEAL. Working pressure: 10 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° tube end, threaded, with a nut and a ring for clamping onto the hose. Recommended for LPG hose. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft PVC ends designed for the SUPERELASTIC hose. Also available are polyethylene T and Y couplings mounted inside the hose. Color black. Operating temperature from 0ºC to +70ºC (temporarily up to +80ºC).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped end with internal thread, type FACP, for Teflon brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsJIC 37° plug with internal UNF thread (sealing on the internal 37° cone). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTime element whose function is to achieve a delay for the pneumatic signal. The output signal delay value is set using a control knob. The maximum delay value can be increased by connecting an additional external tank. Built-in pressure indicator and plug connections for 4 mm tubing. Mounting in any position. Material: body - anodized aluminum/plastic, internal components: brass/plastic, sealing - NBR. Operating temperature: from -10°C to +60°C. Working pressure: 2.5 to 8 bar. Nominal flow: 100 Nl/min at 6 bar with a pressure drop of 1 bar. Adjustable delay range: 0 to 30s at 6 bar. Signal reset time: <0.1s. Repeatability: +/-0.4 s.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsY-type plug tee with a fitting, type R24, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket IBC for ASA flange made according to ASME B16.21 (ANSI) standards. The permissible working pressure at which a given gasket can be used depends on the temperature and type of medium (selection should be agreed upon with TUBES INTERNATIONAL®). When selecting a gasket, attention should be paid to the outer diameter dimension, appropriate for the flange class. For example: gasket DN 15 ASA600 is suitable for ASA300 and ASA400 classes. Material: PTFE. Working pressure: up to 300 bar. Operating temperature: from -200°C to +220°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for sandblasting. Thick inner layer made of rubber with very good abrasion resistance (50±5 mm³ according to ISO 4649 / DIN 53516). The inner and outer layers are antistatic, preventing the accumulation of electric charges. Used for sand and steel shot in abrasive blasting of steel structures, castings, concrete surfaces, etc. Commonly used in the metal and shipbuilding industries. Fitted with special nozzles for sandblasting. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black NR/SBR rubber. Reinforcement: synthetic cord. Outer layer: black NR/SBR rubber. Working pressure: 12 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd cap for CAMLOCK DP coupling made according to American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on coupling size. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ adaptor with external BSP thread intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed flow diameter. With a symmetrical design of the connecting part, allowing for easy connection. Elements with the same hook spacing can be connected. Material: stainless steel. Working pressure: 16 bar. Seal: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLET-LOK® type four-way coupling for metric tubing intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure tee type A117 with internal BSP threads, with swivel nuts (60° cone sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDismantling key used for disconnecting hoses from plug-in hoses. Designed for series R. Outer diameter of the hose from 4 to 14 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd made of soft plastic, designed to be screwed onto an EVA hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight tube end, screwed, with a nut and a ring for clamping onto the hose. Recommended for LPG hose. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped end with external thread, type MACP, for Teflon brake hoses (internal cone seal). Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSponge ball for cleaning hoses intended for concrete pouring. Type of structure: soft, medium, hard.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut intended for connection with JIC37° fitting (coupling) to seamless precision hydraulic tube. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRound washer according to DIN 125 A. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector type LET-LOK® with external BSP thread for metric tubing, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard handle (lever) for CAMLOCK connectors, type HR. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCompressed air lubricator series BIT with BSP thread connection ensures proper lubrication of devices in pneumatic installations with oil mist and is characterized by high oiling stability. Particularly recommended for operation at low flow rates. Size: 1/8", 1/4". Tank capacity: 26.5 cm³. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Connection: BSP 1/8", 1/4". Flow rate: 710 l/min - 1/8", 1/4" (at input pressure of 6 bar and Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for UHP adapters with external thread. Material: carbon steel, black galvanized. Working pressure: 700 bar (with a safety factor of 4), 1000 bar (with a safety factor of 2.8). Material: carbon steel, black galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal pneumatic control distribution valve, most commonly used for controlling the operation of actuators. It can be mounted inline, on a wall, directly to actuators, or on a connection block. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ coupling with flange connection designed for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed diameter of flow. With a symmetrical design of the connecting part, allowing for easy connection. Elements with the same spacing of hooks can be connected. Material: stainless steel. Working pressure: 16 bar. Seal: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure tee type A109 with external BSP thread (60° cone sealing). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO side crimp fitting 45° for PTFE brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose coupling clamp for SPIRAFLEX hoses with end rings. Made from PVC profile, with a galvanized steel tension wire. Lock with a galvanized steel lever. Width approximately 60 mm. Provides quick connection and disconnection of SPIRAFLEX hose sections, easy construction of air supply and ventilation lines in field conditions. Available on request in many other sizes ranging from DN150 to DN1200.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-shaped plug connector, adjustable with internal thread, type R35/F, intended for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe plug for the CAMLOCK SAFETY BUMP connector socket is an alternative solution to traditional CAMLOCK connector plugs, due to the specially designed handle that facilitates hose operation. It is used in the chemical and petrochemical industries. It is made in an antistatic version in black, from composite material reinforced with fiberglass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSafety pin for the groove joint clamp. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-reverse valve type MRF NTV series COMPACT "N" for installation in the connections of distribution valves, used in pneumatic systems for regulating the flow rate of compressed air and the direction of flow. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change via a control knob and/or screwdriver; possibility of securing the setting with a locking nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +50°C. Material: plastic.
