Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off V3V hand with a lock, series SKILLAIR®, without plates end. task its is separation the system working od air supply. is to valve normally closed, three-way. W position closed cuts off air supply simultaneously venting configuration, co makes go especially useful during work service. W position rest (closed) can be closed on a padlock co secures valve against switching on through unauthorised persons. Size: 100, 200, 300. Supply pressure: up to 15 bar (depending on size). Operating temperature: up to +50°C. Flow rate nominal: depending on size for 4700 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA set for connections flange (EN 1092), type SZ2. W set: bolts DIN 933 - 4 pcsi, a nut - 4 pcsi and washer - 4 pcsi. class properties mechanical: A2-70 - bolts; A2-70 - a nut. Selection of bolts and nuts for flanges according to the table in the attachment. Material: steel AISI 304.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA STORZ coupling with a hose end intended for transfer installations for liquid and bulk substances. Used in firefighting, irrigation systems, the chemical and food industry, agriculture, etc.. Characterized by a large, unobstructed flow diameter. With a symmetrical design of the connection part, thanks to which they can be easily connected together. Parts with the same lug spacing can be connected. Material: steel stainless. Working pressure: 16 bar. Gasket: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting angled 90° JIC 37° with UNF male thread (37° cone sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA LET-LOK® straight fitting for an inch tube intended mainly for the chemical, petrochemical and pharmaceutical industry, power generation, nuclear power plants and process engineering. The permissible working pressure is determined on the basis of the outer diameter and the wall thickness of the tube (details in the attachment). Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with a BSP male thread (sealing on the internal 60° cone) and NPT male thread (sealing on the thread) allowing UHP quick couplings and hoses to be joined together, as well as connected to UHP connection blocks. Material: black-zinc-plated steel. Working pressure: 1500 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter type A202 with BSP male thread (60° cone sealing) and with NPT male thread (thread sealing). Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter accurate DEP series SYNTESI®, without connections end, serves for removal with high accuracy contaminants liquid or solid, contained in compressed air. high accuracy filtration obtained is through use special element filtering called „an insert coalescing”. Size: SY1, SY2. Filtration grade: 0.01 µm - Class cleanliness air acc. to ISO 8573-1: 1-7-2. Supply pressure: up to 15 bar - size SY1, up to 13 bar - size SY2. Operating temperature: od -10°C up to +50°C. Condensate drain: manual / semi-automatic (RMSA). Flow rate recommended: 460 l/min - size SY1, 620 l/min - size SY2 (at pressure 6.3 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° tubular BURGACLIP with a female UNF thread, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped BANJO fitting 45° for hoses brake PTFE. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug JIC 37° with UNF male thread (sealing on the external 37° cone). Material: AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsChain for coupling CAMLOCK. length: 300 mm. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting 90° type LET-LOK® with a BSPT male thread for a metric tube intended mainly for the chemical, petrochemical and pharmaceutical industry, power generation, nuclear power plants and process engineering. The permissible Working pressure fittings is determined on the basis of a given size and type connections threaded (details in the attachment). Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee 45° KTSB 45 intended for quick and efficient assembly of ducting hoses using BC worm-drive bridge clamps. Material: steel galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee plug-in "T" with spigot, type R48, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA lip gasket intended for suction-delivery hoses. For food applications (for contact with drinking water - index codes ending in "05"). Material: white NBR rubber. Operating temperature: from -40°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAND – and logic element. Controlled by compressed air, reset by compressed air. Can be mounted in any position. Material: body – plastic, spindle – aluminum, sealing – NBR. Nominal flow: 100 Nl/min at 6 bar with a 1 bar pressure drop. Built-in push-in fittings for 4 mm tubing. Operating temperature: from -10°C to +60°C. Working pressure: 0 to 8 bar. Control pressure: 1.5 to 8 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - nipple high-pressure type A202, with BSP male thread (60° cone sealing) and with NPT male thread (thread sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with a BSP male thread (sealing by means of a metal-rubber gasket) allowing UHP quick couplings and hoses to be joined together, as well as connected to UHP connection blocks. Material: black-zinc-plated steel. Working pressure: 1500 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter FIL series BIT recommended for decentralised compressed-air systems or in the immediate vicinity of actuating devices. Size: 1/8", 1/4". Filtration grade: 5 µm, 20 µm, 50 µm. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 1200 l/min - 1/8", 1/4" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA set rings inch (front + rear) for use in connectors type LET-LOK®. Quantity: 10 pcs. Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped BANJO fitting side 15° for hoses brake PTFE. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut intended for connection fittings (fittings) JIC37° with hydraulic seamless tube precision. Material: AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDirectional valve plug-in side with a thread external, type R45, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket for couplings CAMLOCK AU and DU intended for sealing connection thread internal with parallel a thread external. Material: PTFE. Operating temperature: from -20°C to +220°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and thick hose suction-delivery intended for conveying bulk substances abrasive e.g. powders, cement, granulates, abrasive etc. externally Serrated, inside smooth. Layer inner with resistant to abrasion polyurethane. is characterized good resistance on impacts external and heavy conditions use. resistant to radiation UV and low temperatures. hose has arranged next to spiral cable copper coated polyurethane, which po earthing (or connection with earthed fitting) discharges charges electrical. used in installations industrial, for handling, in construction and industry shipbuilding. Inner layer: blue polyurethane. Reinforcement: rigid-PVC spiral. Hose material: grey and violet PVC. Working pressure: from 5 bar to 6 bar - depending on the diameter hose and temperatures. Vacuum: for 0.9 bar. Operating temperature: od -20°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off 3/2 used as valve switching and venting installations pneumatic. when sleeve control shifted is for the back, then configuration pneumatic is vented, a when sleeve is shifted for the front, to configuration pneumatic is pressurized. pressure working: 10 bar. Operating temperature: from -10°C to +80°C. Material the body: brass chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA STORZ coupling with a hose end for an RS clamp intended for transfer installations for liquid and bulk substances. Used in firefighting, irrigation systems, the chemical and food industry, agriculture, etc.. Characterized by a large, unobstructed flow diameter. With a symmetrical design of the connection part, thanks to which they can be easily connected together. Parts with the same lug spacing can be connected. Material: aluminum. Working pressure: 16 bar. Gasket: white NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure 90° adapter type A115C compact with BSP female thread (60° cone sealing). Material: carbon steel, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting tubular BURGACLIP with a female UNF thread, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA clamp adjustable a lever for coupling grooved without the gasket and cotter pins protective. Material: steel carbon. Working pressure: 85 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting angled 90° adjustable JIC 37° with NPT male thread (sealing on the thread – PTFE tape or anaerobic sealant). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA bolt for a BANJO connector, intended for fastening brake lines. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket Leak-free quick coupling ISO-F "flat-face" type IF with a BSP female thread. Intended mainly for construction machinery, where large pressure surges occur. The zinc-nickel coating provides several times greater corrosion resistance than a zinc coating. The socket has a stem to prevent accidental disconnection. interchangeable with quick coupling ISO-F from other manufacturers. Application: power hydraulics (hydraulic oil). Material: steel with a zinc-nickel coating. Sealing: NBR (Operating temperature from -25°C to +100°C); Viton (Operating temperature from -15°C to +200°C). Working pressure: up to 400 bar (depending on the quick-coupling size). The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap for UHP adapters with a male thread. Working pressure: od 2000 bar up to 3000 bar (depending on the thread size). Material: carbon steel, black-galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off pilot-operated manually V3V series SYNTESI®, without end connections, serves for separation the system working od air supply. is to valve three-way, two-position, normally closed. W position closed cuts off air supply and vents configuration, co makes go especially useful at performing work service. has configuration allowing on mounting dwu in size SY1 or three in size SY2 padlocks o diameter 3 mm. alternatively Available is version with a hole Ø 7 for single padlock. On rear and front surface valve is found the connection auxiliary (1/8” for rate SY1 and 1/4” for size SY2) for connection pressure gauge, sensor pressure or for additional draw air. Size: SY1, SY2. Connection: 1/8" BSP female, 1/4", with the front and with the back. Supply pressure: up to 15 bar, depending on size. Operating temperature: od -10°C up to +50°C. Flow rate nominal: for 4000 l/min, depending on size (at an inlet pressure of 6 bar and Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal directional valve with control by mechanical, a lever front with a roller, most often used for controlling the operation of actuators. It can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. pressure working: up to 10 bar. Operating temperature: -10°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA swivel STORZ coupling with a female BSP thread intended for transfer installations for liquid and bulk substances. Used in firefighting, irrigation systems, the chemical and food industry, agriculture, etc.. With a symmetrical design of the connection part, thanks to which they can be easily connected together. Parts with the same lug spacing can be connected. Material: aluminum. Working pressure: 16 bar. Gasket: white NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in angled 90° with a thread external tapered, type R39C, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCylindrical filter with round holes with a BSP threadT for use with hoses for drawing water, sewage, emptying tanks, etc. Material: carbon steel, galvanized.
