Is the Crimped end with GZ, type MACP, carbon steel compatible with Teflon brake hoses using an internal cone seal?

Yes . the Crimped end with GZ, type MACP, carbon steel is compatible with Teflon brake hoses that use an internal cone seal. The product description specifies it is a crimped end with external thread, type MACP, designed for Teflon brake hoses with an internal cone seal, and its carbon steel, chrome-plated construction is suitable for typical hydraulic braking applications. Ensure thread size and cone seat dimensions match the hose and mating component to guarantee proper sealing and safe installation.

Can Crimped end with GZ, type MACP, carbon steel be used on Teflon brake hoses with an internal cone seal under high pressure?

No - Crimped end with GZ, type MACP, carbon steel should not be used on Teflon brake hoses with an internal cone seal under high pressure. The described product is âCrimped end with external thread, type MACP, for Teflon brake hoses (internal cone seal). Material: carbon steel, chrome-plated,â which implies compatibility only with hoses designed for that specific crimp and seal geometry. Using a different crimped end (GZ variant) risks improper sealing, mismatched dimensions, material incompatibility and loss of mechanical integrity under high pressure, leading to leaks or catastrophic failure. Always use fittings and crimp ends specified by the hose manufacturer and rated for the hoseâs pressure and sealing type; verify conformity with relevant standards and perform pressure testing.

Does the Crimped end with GZ, type MACP, carbon steel fit Teflon brake hoses with an internal cone seal without adapters?

Yes. The Crimped end with GZ, type MACP, carbon steel is designed for Teflon brake hoses with an internal cone seal and fits directly without additional adapters. The product description specifies it is a crimped end with external thread for Teflon brake hoses (internal cone seal), so it is compatible as supplied.

Crimped fitting with male thread, type MACP, steel carbon

All products, Brake hoses and fittings/

Additional information

Material	CS – steel (cast iron)

A crimped fitting with a male thread, type MACP, for PTFE brake hoses (sealing cone internal). Material: carbon steel, chrome-plated.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RK-MACP-0N	Fitting with M10x1.25 male seal cone inner, chrome-plated steel	3	-	In stock	Enquiry
RK-MACP-1N	Fitting with M10x1 male seal cone inner, chrome-plated steel	3	-	In stock	Enquiry
RK-MACP-2N	Fitting with 3/8"-24 male seal cone inner, chrome-plated steel	3	-	In stock	Enquiry