Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling socket with a shut-off valve and internal BSP thread. Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery, as well as in conveyors and mobile platforms. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Socket sealing: NBR. Operating temperature: from -25°C to 100°C. Working pressure: up to 400 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow rate is given at Δp = 3 bar [l/min].- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLocking nut with BSP thread type A108, for use with adapter type A107. Material: carbon steel, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBURGACLIP stainless steel clamp for hose end type 3090 for air conditioning.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal for the groove joint clamp. Material: SBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPneumatic-electric relay 2A NO/NC 2 MT (version with two-meter hose). Supply pressure: up to 15 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOP shut-off valve series STP-U with a check valve and plug-in connection, primarily used as a safety valve. When installed on the actuator's supply connections, it allows airflow only in the presence of a pneumatic control signal. The actuator is stopped after a drop in control pressure. Operating pressure: 0.5 ÷ 10 bar. Operating temperature: from -10°C to +60°C. Body material: nickel-plated brass. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight bulkhead fitting JIC 37° with external UNF thread (seal on 37° cone). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adapter type A116 with external BSP thread (60° cone seal) and with external BSP thread (60° cone seal). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCylindrical filter with round holes with a "tail" for hose application in water, sewage, and tank emptying hoses, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-B quick coupling socket with valve, internal BSP thread, for use in high-pressure industrial installations (water, fuels and oils, gases, chemicals). Supplied with a plug, it creates a double shut-off connection, which can be found wherever transmission lines need to be connected and disconnected for equipment servicing or maintenance, and fluid loss is undesirable. It can be used interchangeably with ISO-B quick couplings from other manufacturers. Material: AISI 316 steel. Sealing: viton. Operating temperature: from -20°C to +200°C. Working pressure: up to 250 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow rate is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete double BANJO plug connector, type R56, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector - type "T" tee BURGACLIP for hose type 3090 for air conditioning. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini SDR series G pressure reducer with internal BSP thread, manually adjustable, maintains a constant output pressure regardless of fluctuations in inlet pressure. The package includes a mounting bracket and a pressure gauge. Size: 100, 200. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: BSP female M5 ÷ 1/4". Flow rate: 150 l/min - size 100, 500 l/min - size 200 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMetric tube fitting type LET-LOK® with internal BSP thread intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tube (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass mushroom valve without STORZ fire connections at the outlet (external threads from 1" to 2.1/2") used as basic equipment for fire hydrant cabinets (fire protection systems, residential buildings, etc.). Connection to the installation with external thread (from 1" to 2.1/2"). Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLogical OR element. Control by compressed air, reset by compressed air. Mounting in any position. Material: body - plastic, spindle - aluminum, sealing - NBR. Nominal flow: 100 Nl/min at 6 bar with a pressure drop of 1 bar. Built-in plug couplings for 4 mm tubing. Operating temperature: from -10°C to +60°C. Working pressure: 0 to 8 bar. Control pressure: 1.5 to 8 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable asymmetrical "T" branch coupling with external thread and internal UNF thread, nut (seal on 37° cone). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adaptor type A114 with external BSP thread (60° cone sealing) and internal BSP thread, with a swivel nut (60° cone sealing). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Detailscoupling with an extended spigot and external thread, type R18, designed for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° fitting type LET-LOK® with external BSP thread, adjustable, for metric tubing primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure of the fitting is determined based on the outer diameter of the tubing and the wall thickness of the tubing (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC 37° fitting with external metric thread (rectangular cross-section elastomer seal). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGAL series GA lubricator with internal BSP thread ensures proper lubrication of devices with oil mist in pneumatic installations. The package includes a mounting bracket/holder. GA connection sets (L, T, U shapes) are used for connecting individual components. Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: from -5°C to +70°C. Connection: BSP 1/8" to 1". Flow rate: 2750 l/min - size 200, 5000 l/min - size 300, 8800 l/min - size 400, 14500 l/min - size 600 (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBURGACLIP stabilization clip made of blue plastic, for hose end type 3090. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-F "flat-face" type IF non-drip quick coupling with internal BSP thread. Designed mainly for construction machinery where large pressure fluctuations occur. The zinc-nickel coating provides several times greater corrosion resistance than a zinc coating. Interchangeable with ISO-F quick couplings from other manufacturers. Application: hydraulic power (hydraulic oil). Material: steel with zinc-nickel coating. Sealing: NBR (operating temperature from -25°C to +100°C); viton (operating temperature from -15°C to +200°C). Working pressure: up to 400 bar (depending on the size of the quick coupling). Flow is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, smooth, flat-wound hose designed for the discharge of bulk materials. Particularly used in installations exposed to vibrations and mechanical damage. Suitable for contact with food and in the pharmaceutical industry, being tasteless and odorless, in compliance with FDA requirements (21CFR177.2600). It is not subject to hydrolysis and is resistant to microbes. Also resistant to mineral oils, aging, atmospheric factors, ozone, UV, and many chemicals. Hose material: transparent polyurethane. Working pressure: from 0.135 bar to 1.03 bar, depending on the hose diameter. Operating temperature: -40°C to +90°C (temporarily +125°).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ adaptor with internal BSP thread and safety latch designed for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed flow diameter. Symmetrical design of the connection part, allowing for easy connection. Elements with the same hook spacing can be connected. Material: aluminum. Working pressure: 16 bar. Seal: white NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure plug type A112 with internal BSP thread, with a swivel nut (60° cone seal). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FIL filter series SYNTESI® without end connections is used for removing solid and liquid contaminants from the air produced by the compressor. Size: SY1, SY2. Filtration degree: 5 µm, 20 µm, 50 µm. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: up to +50°C. Connection: BSP 1/8" to 3/8" for SY1 and BSP 3/8" to 1" for SY2. Additional connection for pressure gauge or fittings: BSP 1/8" for SY1 and 1/4" for SY2. Condensate drain: manual/semi-automatic (RMSA), automatic float (RA). Flow rate: 1300 l/min - 1/8", 1650 l/min - 1/4", 1750 l/min - 3/8" (SY1), 4500 l/min - 3/8" (SY2), 5200 l/min - 1/2", 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-drip "flat-face" ISO-F quick coupling socket with shut-off valve and internal BSP thread. Application: hydraulic power (hydraulic oil). Designed mainly for construction machinery. The socket features a safety pin to prevent accidental disconnection. The quick coupling can be operated with one hand. Interchangeable with ISO-F quick couplings from other manufacturers. Material: galvanized steel. Sealing: NBR, viton. Operating temperature: from -25°C to +200°C (depending on the type of sealing). Working pressure: up to 300 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow rate is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of metric rings (front + rear) for use in LET-LOK® type couplings. Quantity: 10 pieces. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector with R134 BURGACLIP valve for hose type 3090 for air conditioning. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC 37° fitting with internal BSP thread (seal on the thread – with Teflon tape or anaerobic sealant). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, lever with roller, commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ coupling with flange connection intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed diameter of flow. With a symmetrical design of the connecting part, allowing for easy connection. Elements with the same hook spacing can be connected. Material: aluminum. Working pressure: 16 bar. Seal: white NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL plug connector with a fitting, type R48, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adapter type A116 with external BSP threads (60° cone sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWrench for STORZ fire connections in sizes A (110), B (75), and C (52). Material: ductile iron.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBanjo elbow body, type R13, for screws of series D, intended for connections of pipes and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic side. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMGS22 series manometer, filled with silicone oil, for high-pressure applications, for measuring the pressure of gases and low-viscosity, non-crystallizing liquids, in a safe design S3 (EN 837-2), with special HP connections. Complies with the latest standard for ultra-high-pressure manometers DIN 16001. It features a solid front baffle wall and a blow-out back element, protecting the operator in case of pressure element (Bourdon tube) failure. The process connection is welded (TIG) to the housing, which strengthens the manometer and ensures better housing tightness. Mainly used in cutting or cleaning technologies of various materials using high-pressure water jets, e.g., in water cutting machines, pumps, and water turbines. The silicone oil filling of the manometer helps reduce pointer fluctuations, decrease wear on moving parts of the mechanism under pressure pulsations and vibrations. Additionally, it prevents condensation and the formation of a corrosive atmosphere inside the manometer, which could damage internal components. Upon request, MGS22 manometers are available for 5000 and 6000 bar (150 mm), accuracy class 1.6 in accordance with DIN 16001. Connection: bottom. Dial diameter: 100 mm, 150 mm. Pressure ranges: 0 to 2500 bar, 0 to 3000 bar, 0 to 4000 bar. Accuracy class: 1.0. Ambient temperature: from -40°C to +65°C. Medium temperature: maximum up to +65°C. Housing material: stainless steel. Window: laminated safety glass. Connection material: stainless steel AISI 316L. Bourdon tube: duplex stainless steel. Mechanism: stainless steel. Filling: silicone oil. Safety class: S3. Protection degree: IP 67 (IEC 529).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsO-ring for freon for air conditioning fittings. Material: hydrogenated nitrile rubber (HNBR). Operating temperature: from -30°C to +150°C.
