Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTECKO socket-plug connector for use in hydraulic systems for mining. Material: automatic steel, galvanized. Sealing: NBR (o-ring), Teflon (back-up ring).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight ORFS INTERLOCK fitting with internal UNF thread, flat sealing, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug connector with locking nuts SKV for use in hydraulic systems. Material: galvanized steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket tee of the STECKO system for use in hydraulic systems for mining. Material: automatic steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° INTERLOCK SAE 6000 flange end, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSKV plug coupling with a locking nut and INTERLOCK type "tail" designed for hydraulic hoses type 4SH, R13, R15 (in sizes 3/4" to 1.1/2"). Sealing: NBR. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTECKO plug connector for use in hydraulic systems for mining. Material: automatic steel, galvanized. Sealing: NBR (o-ring), Teflon (back-up ring).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight flange end INTERLOCK SAE 3000, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe safety pin is used to prevent accidental loosening of the nut on the connector plug side of the SKV. Installation between the safety clamp and the locking nut. Diameter D - outer diameter. Material: red PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSKV socket end with INTERLOCK type "tail" designed for hydraulic hoses type 4SH, R13, R15 (in sizes 3/4" ÷ 1.1/2"). Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor with external BSP thread and WEO socket for use in hydraulic systems; designed for easy connection of hydraulic hoses terminated with a WEO plug. Once connected, the plug has freedom of movement in the socket, preventing twisting of the hoses during installation. Working pressure: 350 bar (for size up to 3/4"), 250 bar (for size 1"). Material: hardened steel. Operating temperature: from -30°C to +100°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° INTERLOCK end with internal metric thread, 24° cone with O-ring, heavy series, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° INTERLOCK angular fitting with internal BSP thread, 60° cone with o-ring, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBPMTKM clamping sleeve for thermoplastic hoses type MTKM or CNG. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° ORFS INTERLOCK fitting with internal UNF thread, flat sealing, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWEO plug with hose end for use in hydraulic systems where there is not enough space to install the hose in the traditional way. Plug with O-ring for use with CJ-H-14860 rotary socket... Designed for hoses type 1SN, 2SN, 1SC, 2SC. Working pressure: 350 bar (for hose size up to 3/4"), 250 bar (for hose size 1"). Material: hardened steel. Operating temperature: from -30°C to +100°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight INTERLOCK end with external metric thread, 24° cone, heavy series, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° ORFS INTERLOCK fitting with internal UNF thread, flat sealing, for hose types 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° INTERLOCK angled fitting with internal BSP thread, 60° cone with O-ring, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with internal BSP thread and nut, sealing cone 60° (DKR). Designed for screwing into rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed sleeve for rubber hydraulic hoses type 2SN (R2T). Use only with a screwed fitting from the same supplier (TI-S…). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed sleeve for rubber hydraulic hoses type 1SN(R1AT). Use only with a screwed fitting from the same supplier (TI-S...). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed sleeve for thermoplastic hoses type SAE100R7, MT1, MTH1, OL7M or VE7M. Use only with a screwed fitting from the same supplier (TI-S...). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with internal metric thread and nut, metal-metal sealing on a 60° cone (DKM). Designed for screwing in rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with metric tube, sealing with a cutting ring (BEL), angular 90° lightweight series. Designed for screwing in rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with metric tube, sealing with a cutting ring (BEL), light series. Designed for screwing in rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with external BSP thread, sealing cone 60° (AGR). Designed for screwing into rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with metric tube, sealing with a cutting ring (BES), angular 90° heavy series. Designed for screwing in rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with metric tube, sealing with a cutting ring (BEL), angled 45°, light series. Designed for screwing in rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with internal BSP thread and nut, sealing cone 60° (DKR). Designed for screwing into rubber and thermoplastic hoses using a screwed sleeve. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed sleeve for thermoplastic hoses type OL5 or VE5. Use only with a screwed fitting from the same supplier (TI-S...). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with metric tube, sealing with a cutting ring (BES), heavy series. Designed for screwing in rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with external BSP thread, sealing cone 60° (AGR). Designed for screwing into rubber and thermoplastic hoses using a screwed sleeve. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic screw end, type S, with metric tube, sealing with a cutting ring (BES), angled 45°, heavy series. Designed for screwing into rubber and thermoplastic hoses using a screw sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with internal BSP thread and nut, sealing cone 60° (DKR), angled 90°. Designed for screwing into rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed sleeve for thermoplastic hoses type MT1 or MTH1. Use only with a screwed fitting from the same supplier (TI-S...). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with external metric thread, sealing on a 24° cone (CEL), lightweight series. Designed for screwing into rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor with external BSP thread (sealing DIN 3852 type E - elastomeric seal with rectangular cross-section) and rotating WEO socket for use in hydraulic systems; designed for easy connection of hydraulic hoses terminated with WEO plug. Once connected, the plug has freedom of movement in the socket, preventing twisting of hoses during installation. For use only with plugs CJ-H-14716... Working pressure: 350 bar (for size up to 3/4"), 250 bar (for size 1"). Material: hardened steel. Operating temperature: from -30°C to +100°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket four-way coupling of the STECKO system for use in hydraulic systems for mining. Material: automatic steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWEO socket with hose end for use in hydraulic systems where there is not enough space to install the hose in the traditional way. Designed for hoses type 1SN, 2SN, 1SC, 2SC. Working pressure: 350 bar (for hose size up to 3/4"), 250 bar (for hose size 1"). Material: hardened steel. Operating temperature: from -30°C to +100°C. Sealing: NBR.
