Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with external BSP thread, flat sealing - requires the use of an additional flat gasket (AGR-F). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with external BSP thread, 60° sealing cone (AGR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOL), 90° angled, lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOS), 90° angled, heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, O-ring seal on a 24° cone (DKOS), heavy-duty series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with metric tube, sealing with a cutting ring (BEL), angled 45° light series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with metric tube, sealing with a cutting ring (BEL), 90° angled light series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for the hose), with a metric tube, sealing with a cutting ring (BEL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with metric tube, sealing with a cutting ring (BES), angled 45° heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with metric tube, sealing with a cutting ring (BES), angular 90° heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket for SAE flanges. Material: polyurethane.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIL4 clamping sleeve for rubber hydraulic hoses with spiral reinforcement type 4SH, R13, and R15. Use only with INTERLOCK hydraulic fittings from the same supplier. Assembly - external and internal machining. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Diameter D3 [mm] - lock diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNON-SKIVE clamp sleeve for rubber hydraulic hoses with spiral reinforcement type 4SP, 4SH, R13, and R15. Use only with the appropriate NON-SKIVE hydraulic fitting from the same supplier. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° NON SKIVE end with internal metric thread, with sealing on a 24° cone, o-ring (DKOS 90), heavy series, designed for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N... . Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight INTERLOCK end with internal metric thread, 24° cone with O-ring, heavy series, for hose type 4SH, R13, and R15. Material: carbon steel, galvanization.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight flange end INTERLOCK SAE 6000, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight NON SKIVE end with internal BSP thread, featuring a 60° cone seal with an O-ring (DKOR), designed for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N... Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight NON SKIVE end fitting with internal metric thread, with sealing on a 24° cone, o-ring (DKOS), heavy series, intended for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N... . Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTECKO pin as a securing element for the connection between the plug and socket. Material: automatic steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIL13 clamping sleeve for rubber hydraulic hoses with spiral reinforcement type R13 and R15. Use only with INTERLOCK hydraulic fittings from the same supplier. Assembly - external and internal machining. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Diameter D3 [mm] - lock diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTECKO socket-plug elbow for use in hydraulic systems for mining. Material: automatic steel, galvanized. Sealing: NBR (o-ring), Teflon (back-up ring).
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° NON SKIVE SAE 3000 flange end (SFL 45), lightweight series, designed for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve... Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° INTERLOCK SUPERCAT flange end, O-ring seal or other gasket in the flange groove, for hose types 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight flange end INTERLOCK SUPERCAT, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight NON SKIVE end fitting with external metric thread, with sealing on a 24° cone, O-ring (CES), heavy series, intended for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve. Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTECKO socket connector for use in hydraulic systems for mining. Material: automatic steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe safety clamp is used to secure the connected joint (plug with SKV socket) during maneuvering or transferring connected hoses before their disconnection. Diameter D - outer diameter. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° INTERLOCK SAE 6000 flange end, O-ring seal or other gasket in the flange groove, for hose types 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight non-skive flange end SAE 6000 (SFS), heavy series, designed for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve. Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction socket connector of the STECKO system for use in hydraulic systems for mining. Material: automatic steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTECKO socket elbow for use in hydraulic systems for mining. Material: automatic steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° Non-Skive Flare Fitting SAE 6000 (SFS 90), heavy series, designed for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve... Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight INTERLOCK end with internal BSP thread, 60° cone with o-ring, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWEO plug with hose end for use in hydraulic systems where there is not enough space to install the hose in the traditional way. Once connected, the plug has freedom of movement in the socket, which prevents the hoses from twisting during installation. Designed for hoses type 1SN, 2SN, 1SC, 2SC. Working pressure: 350 bar (for hose size up to 3/4"), 250 bar (for hose size 1"). Material: hardened steel. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor with external BSP thread (sealing DIN 3852 type E - elastomeric seal with rectangular cross-section) and WEO socket for use in hydraulic systems; designed for easy connection of hydraulic hose terminated with WEO plug. Once connected, the plug has freedom of movement in the socket, preventing twisting of hoses during installation. Working pressure: 350 bar (for sizes up to 3/4"), 250 bar (for size 1"). Material: hardened steel. Operating temperature: from -30°C to +100°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° NON SKIVE end with internal BSP thread, with sealing on a 60° cone with an O-ring (DKOR 45), intended for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N... . Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° INTERLOCK fitting with internal metric thread, 24° cone with o-ring, heavy series, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction plug connector of the STECKO system for use in hydraulic systems for mining. Material: automatic steel, galvanized. Sealing: NBR (o-ring), Teflon (back-up ring).
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° INTERLOCK SUPERCAT flange end, O-ring seal or other gasket in the flange groove, for hose types 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° WEO plug with hose end for use in hydraulic systems where there is not enough space to install the hose in the traditional way. After connection, the plug has freedom of movement in the socket, which prevents the hoses from twisting during installation. Designed for hoses type 1SN, 2SN, 1SC, 2SC. Working pressure: 350 bar (for hose size up to 3/4"), 250 bar (for hose size 1"). Material: hardened steel. Operating temperature: from -30°C to +100°C.
