Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSKV plug coupling with a locking nut and INTERLOCK type "tail" designed for hydraulic hoses type 4SH, R13, R15 (in sizes 3/4" to 1.1/2"). Sealing: NBR. Material: galvanized steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShort bottom plate for welding for the assembly of heavy complete DIN 3015 clamp type 201. Material: carbon steel or AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Standards: EN 853 1SN, ISO 1436-1SN/R1AT, SAE 100R1AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 250 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +125°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality three-way ball valve "L" type SK3L with internal BSP thread, designed for high-pressure hydraulic installations. Material: steel (body, ball, stem). Seals: POM (ball), NBR (stem). Operating temperature: from -40°C to +100°C (POM); from -20°C to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTECKO plug connector for use in hydraulic systems for mining. Material: automatic steel, galvanized. Sealing: NBR (o-ring), Teflon (back-up ring).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHand lever designed for standard two-way and three-way ball valves. To ensure proper selection, the dimension SW of the square stem of the ball valve must be checked. Material: zinc alloy.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic end fitting (type P - with a special "tail" for thermoplastic hose) with internal BSP thread, sealing on a 60° cone (DKR). Designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight flange end INTERLOCK SAE 3000, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPackage screw for clamp DIN 3015 standard type 100/101 with external and internal metric thread, intended for mounting clamps one on top of the other. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose with reduced outer diameter and weight, and increased flexibility. Complies with standards: EN 857 2SC, EN45545-2. Inner layer: black synthetic rubber. Reinforcement: double steel braid. Outer layer: black, flame-retardant synthetic rubber. Working pressure: from 90 bar to 400 bar depending on hose diameter. Operating temperature: from -40°C to +100°C. For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed plug HPA of hydraulic quick couplings designed for installations with very high pressures, where there are significant mechanical loads. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Can be connected/disconnected when there is residual pressure in the system. End caps must be ordered separately. Material: carbon steel. Sealing: NBR. Flow: 1/4" - 16.4 l/min, (?p = 4 bar), 3/8" - 21.3 l/min, (?p=4 bar). Working pressure: 700 bar. Burst pressure: 1/4" - 2100 bar (connected coupling), 3/8" - 1850 bar (connected coupling), 1/4" - 1490 bar (disconnected plug), 3/8" - 1500 bar (disconnected plug). Operating temperature: from -25°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe safety pin is used to prevent accidental loosening of the nut on the connector plug side of the SKV. Installation between the safety clamp and the locking nut. Diameter D - outer diameter. Material: red PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 116 quick coupling socket with internal thread and valve designed for hydraulic installations at very high pressures. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Optionally, the socket can be equipped with a safety ring to prevent accidental disconnection. Supplied standard with a cap for protection against contamination. Material: hardened, galvanized steel. Sealing: NBR. Flow: 6 l/min (Δp = 4 bar). Nominal diameter: 2.5 mm. Working pressure: 1500 bar (connected coupling). Burst pressure: 3000 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSKV socket end with INTERLOCK type "tail" designed for hydraulic hoses type 4SH, R13, R15 (in sizes 3/4" ÷ 1.1/2"). Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic end (type P - with a special "tail" for thermoplastic hose) with external BSP thread, sealing on a 60° cone (AGR). Designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 heavy clamp type 201 (with top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. The selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: aluminum. Screw material: galvanized steel. Plate material: galvanized steel. Base material: carbon steel. Operating temperature: up to +350°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsORFS fitting with internal BSP thread (seal on the thread – with Teflon tape or anaerobic sealant), type GAI-B. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose for mining applications. Antistatic, non-toxic, flame-resistant outer layer. It has a certificate confirming compliance with safety requirements in explosion hazard zones. Standards: EN 853-2SN. Inner layer: black synthetic rubber. Reinforcement: double steel braid. Outer layer: black synthetic rubber. Working pressure: from 90 bar to 400 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor with external BSP thread and WEO socket for use in hydraulic systems; designed for easy connection of hydraulic hoses terminated with a WEO plug. Once connected, the plug has freedom of movement in the socket, preventing twisting of the hoses during installation. Working pressure: 350 bar (for size up to 3/4"), 250 bar (for size 1"). Material: hardened steel. Operating temperature: from -30°C to +100°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° INTERLOCK end with internal metric thread, 24° cone with O-ring, heavy series, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight ORFS fitting with external BSP thread (rectangular cross-section elastomer seal), type GE-BE. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose with reduced outer diameter and weight, and increased flexibility (type COMPACT). Confirmed hose lifespan of 300,000 impulse cycles. Standards: EN 857 1SC, ISO 11237-1. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 90 bar to 225 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +120°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part insert for DIN 3015 type 101 clamp made according to DIN 3015 standard. For size group 0, there is one hole for a screw; for size groups 1 to 6, there are two holes for screws. It standardly features a profiled (grooved) surface for the pipe. Insert material: green polypropylene. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 115 quick coupling plug with external thread and valve designed for hydraulic installations with very high pressures. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Supplied standard with a cap for protection against contamination. Material: hardened, galvanized steel. Sealing: NBR. Flow: 6 l/min (Δp = 4 bar). Nominal diameter: 2.5 mm. Working pressure: 1000 bar (connected coupling). Burst pressure: 2600 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFPMU throttling check valve used in hydraulic systems as a component to allow free flow in one direction. The flow throttled in the opposite direction is regulated by a rotating ring. Standard opening pressure 0.5 bar (also available in 2.5, 5, and 10 bar). Permissible flow direction: A → A1 (free), A1 → A (throttled). Material: galvanized steel (body), hardened steel (stem). Sealing: NBR. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° INTERLOCK angular fitting with internal BSP thread, 60° cone with o-ring, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 double clamp type 301 (with upper plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. A clamp with a smooth surface for hoses and hoses is also available, marked with the letter H at the end of the index. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. The selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: self-extinguishing polyamide. Screw material: galvanized steel. Plate material: galvanized steel. Base material: carbon steel. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBPMTKM clamping sleeve for thermoplastic hoses type MTKM or CNG. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Standards: EN 853 2SN, SAE100 R2AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 80 bar to 415 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +120°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for CEJN series 232 quick coupling with a securing chain to protect against contamination and damage. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFPU type throttling and check valve used in hydraulic systems as a component to allow free flow in one direction. The flow throttled in the opposite direction is regulated using a knob. Standard opening pressure 0.5 bar (also available in 2.5, 5, and 10 bar). Permissible flow direction: A → A1 (free), A1 → A (throttled). Material: carbon steel, galvanized (body), steel (spring, stem), plastic (knob). Sealing: NBR. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight ORFS fitting with external UNF thread (O-ring seal in the groove of the flat face), type G. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° ORFS INTERLOCK fitting with internal UNF thread, flat sealing, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 standard clamp type 100 (without top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. For size group 0, there is one hexagon socket screw, and for size groups 1 to 6, there are two hexagon socket screws. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. Selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: self-extinguishing polyamide. Screw material: galvanized steel. Base material: carbon steel. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight ORFS fitting with external BSP thread (rectangular cross-section elastomer seal), type EVGE-BE. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Standards: EN 856 4SH. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 250 bar to 420 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWEO plug with hose end for use in hydraulic systems where there is not enough space to install the hose in the traditional way. Plug with O-ring for use with CJ-H-14860 rotary socket... Designed for hoses type 1SN, 2SN, 1SC, 2SC. Working pressure: 350 bar (for hose size up to 3/4"), 250 bar (for hose size 1"). Material: hardened steel. Operating temperature: from -30°C to +100°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for CEJN series 232 quick coupling socket with a chain to protect against contamination and damage. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable throttle valve type FPB used in hydraulic systems as a flow control element. Flow regulation is achieved via a knob. Permissible flow direction: A → A1, A1 → A. Material: carbon steel, galvanized (body), plastic (knob). Sealing: NBR. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight INTERLOCK end with external metric thread, 24° cone, heavy series, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
