Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, strong, and flexible multi-braided hose, primarily used for high-pressure water cleaning and cutting, hydroforming, hydraulics, chemical injection, and high-pressure lubrication. The hose is pressure tested and supplied with the appropriate certification. It meets the EN 1829-2 standard. Inner layer: POM (polyoxymethylene). Outer layer: PA (polyamide). Material of the end fitting and sleeve: stainless steel (end fitting), carbon steel, galvanized (sleeve). Working pressure: 2500 bar. Operating temperature: from -30°C to +70°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, strong, and flexible, multi-braided hose, primarily used for high-pressure water cleaning and cutting, hydroforming, hydraulics, chemical injection, and high-pressure lubrication. The hose is pressure tested and supplied with the appropriate certification. Inner layer: POM (polyoxymethylene). Outer layer: PA (polyamide). Material of the end fitting and sleeve: stainless steel (end fitting), carbon steel, galvanized (sleeve). Working pressure: 2800 bar. Operating temperature: from -30°C to +70°C (+60° for hose SS-NW-05-6H).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, lightweight, and flexible, double-braided hose used in water cutting and cleaning devices. Applications of the hose include cleaning chemical and energy installations, heat exchangers, cleaning and cutting concrete structures, road surfaces, and cleaning steel surfaces. The hose is pressure tested and supplied with the appropriate certificate. Inner layer: polyoxymethylene. Outer layer: polyamide. Material of fittings and sleeves: carbon steel, galvanized. Working pressure: up to 1200 bar, depending on diameter. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, lightweight, and flexible, double-braided hose used in water cutting and cleaning devices. Applications of the hose include cleaning chemical and energy installations, heat exchangers, cleaning and cutting concrete structures, road surfaces, and cleaning steel surfaces. The hose is pressure tested and supplied with the appropriate certification. Inner layer: polyoxymethylene. Outer layer: polyamide. Fittings and sleeves material: carbon steel, galvanized. Working pressure: up to 1000 bar. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with external BSP thread, flat sealing - requires the use of an additional flat gasket (AGR-F). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with external BSP thread, 60° sealing cone (AGR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOL), 90° angled, lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOS), 90° angled, heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, O-ring seal on a 24° cone (DKOS), heavy-duty series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with metric tube, sealing with a cutting ring (BEL), angled 45° light series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with metric tube, sealing with a cutting ring (BEL), 90° angled light series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for the hose), with a metric tube, sealing with a cutting ring (BEL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with metric tube, sealing with a cutting ring (BES), angled 45° heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with metric tube, sealing with a cutting ring (BES), angular 90° heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket for SAE flanges. Material: polyurethane.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 115 quick coupling socket with internal thread and valve designed for hydraulic installations at very high pressures. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Optionally, the socket can be equipped with a safety ring to prevent accidental disconnection. Supplied standard with a cap for protection against contamination. Material: hardened, galvanized steel. Sealing: NBR. Flow rate: 6 l/min (Δp = 4 bar). Nominal diameter: 2.5 mm. Working pressure: 1000 bar (connected coupling). Burst pressure: 2600 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeamless pipe made of improved steel, cold drawn. The specified working pressure is the theoretical pressure according to DIN 2413-93. Material: E235+N in accordance with EN 10305-4. St (HPC1). 37.4 NBK according to DIN 1630 (HPZ1). The coating of the galvanized pipe is free from Cr VI. Standard length of the pipe (one section): 6 m (shipping in sections of 1 m, 2 m, or longer upon agreement of transport costs).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRail intended for mounting DIN 3015 clamp standard type 100/101 and double DIN 3015 clamp type 301 using ADES or ADESD nut. Shipping in 2 m sections. Material: carbon steel or AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIL4 clamping sleeve for rubber hydraulic hoses with spiral reinforcement type 4SH, R13, and R15. Use only with INTERLOCK hydraulic fittings from the same supplier. Assembly - external and internal machining. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Diameter D3 [mm] - lock diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNON-SKIVE clamp sleeve for rubber hydraulic hoses with spiral reinforcement type 4SP, 4SH, R13, and R15. Use only with the appropriate NON-SKIVE hydraulic fitting from the same supplier. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose with increased lifespan compared to the standard. Confirmed hose lifespan of 400,000 impulse cycles. Standards: EN 853 2SN, ISO 1436-2SN, SAE 100R2S-AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 80 bar to 400 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +120°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality two-way ball valve type BKH with BSP internal thread, designed for high-pressure hydraulic and industrial installations. To properly select the valve for media other than hydraulic oil and for high operating temperatures, consultation with Tubes International is required. Working pressure depends on the sealing material of the valve. Material: steel (body, ball, stem). Seals: PA, PVDF or PTFE (ball), NBR or FKM (stem). Operating temperature: from -40°C to +100°C (PA); from -40°C to +150°C (PVDF); from -200°C to +250°C (PTFE); from -20°C to +100°C (NBR); from -20°C to +200°C (FKM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVMP relief valve limiting the maximum oil pressure in hydraulic systems. It allows free flow of fluid between the P connections. When the pressure exceeds the set value, the T path opens and excess oil drains to the tank. The opening pressure value is set using a screw (adjustment with an Allen key, locked with a locking nut). The valve is equipped with a pressure gauge connection (GW 1/4" BSP) and mounting holes. Body material: galvanized steel. Valve material: galvanized steel. Sealing: NBR. Maximum working pressure: 300 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FPR type check valve is designed to close the flow of hydraulic fluid in one direction and allow free flow of fluid in the opposite direction. Standard opening pressure: 0.5 bar (also available in 3, 6, and 10 bar). Permissible flow direction A → A1. Material: galvanized steel (body), hardened steel (stem). Sealing: metal-metal. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew socket PVS of hydraulic quick couplings designed for installations with very high pressures, where there are significant mechanical loads. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Can be connected/disconnected when there is residual pressure in the system. End caps must be ordered separately. Material: carbon steel. Sealing: NBR. Flow: 1/4" - 16.4 l/min; (Δp = 4 bar), 3/8" - 21.3 l/min; (Δp=4 bar). Working pressure: 700 bar. Burst pressure: 1/4" - 2100 bar (connected coupling), 3/8" - 1850 bar (connected coupling), 1/4" - 1800 bar (disconnected socket), 3/8" - 1850 bar (disconnected socket). Operating temperature: from -25°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° NON SKIVE end with internal metric thread, with sealing on a 24° cone, o-ring (DKOS 90), heavy series, designed for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N... . Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight INTERLOCK end with internal metric thread, 24° cone with O-ring, heavy series, for hose type 4SH, R13, and R15. Material: carbon steel, galvanization.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 standard clamp type 101 (with top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. A clamp with a smooth surface for hoses and hoses is also available, marked with the letter H at the end of the index. For size group 0, there is one hexagon head screw, and for size groups 1 to 6, there are two hexagon head screws. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. The selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: green polypropylene. Screw material: galvanized steel. Plate material: galvanized steel. Base material: carbon steel. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeamless precision metric tube made of cold-rolled austenitic stainless steel. The specified working pressure is the theoretical pressure according to EN 13480-3. Compliant with standards: EN 10216-5 TC1, ASTM A213-AW, ASTM A269, PED 97/23/EC, NACE MR0175/ISO 15156. Material: EN 1.4435, ASTM TP 316L. Dimensions and tolerances according to EN 10305-01. Standard tube length (one section): 6 m (shipping in sections of 1 m, 2 m, or longer upon agreement of transport costs).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Standards: EN 853 2SN, ISO 1436-1 2SN/R2AT, SAE100 R2AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 165 bar to 400 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +125°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVODE valves are used in hydraulic systems as a controlling and blocking element for double-acting actuators. They allow for smooth descent of the actuator under load. The opening pressure value is set using screws (adjustment with an Allen key, locked with a counter nut). The set value must be 30% higher than the pressure value resulting from the load of the receiver. The standard opening pressure of check valves is 0.5 bar. The valves are equipped with mounting holes. Material: galvanized steel (body), galvanized steel (valve). Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-way ball valve type RKH with internal BSP thread, intended for high-pressure hydraulic and industrial installations. For proper selection of the valve for media other than hydraulic oil and for high operating temperatures, consultation with Tubes International is required. Material: stainless steel AISI 316Ti (body, ball, stem). Seals: POM or PTFE (ball), NBR or FKM (stem). Operating temperature: from -40°C to +100°C (POM); from -200°C to +250°C (PTFE); from -20°C to +100°C (NBR); from -20°C to +200°C (FKM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FPM valve limits the maximum pressure in the system. It allows free flow of hydraulic fluid between the P connections. When the pressure exceeds the set value, the T path opens and excess oil drains into the tank. The maximum pressure value is set using a screw (adjustment with an Allen key, locked with a locking nut). Special attention should be paid not to set the pressure value higher than 250 bar (max. working pressure for the valve body). Material: aluminum (body), galvanized steel (stem). Sealing: NBR. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFPR type check valve designed for high-pressure hydraulic and industrial installations. It closes the flow of medium in one direction and opens free flow of medium in the opposite direction. Standard opening pressure: 0.5 bar (also available in 2.5, 5, and 10 bar). Permissible flow direction A → A1. Material: AISI 316 steel (body), AISI 316 steel (stem). Sealing: FKM. Operating temperature: from -10°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-way solenoid valve VCF designed for high-pressure hydraulic systems. Normally closed (NC) variant. The valve is equipped with mounting holes (visible in the photo). couplings to be ordered separately. Material: aluminum (body), galvanized steel (valve). Sealing: NBR. Protection class: IP65. Working pressure: 250 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight flange end INTERLOCK SAE 6000, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight NON SKIVE end with internal BSP thread, featuring a 60° cone seal with an O-ring (DKOR), designed for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N... Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 standard clamp type 101 (with top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. A clamp with a smooth surface for hoses and hoses is also available, marked with the letter H at the end of the index. For size group 0, there is one hexagon head screw; for size groups 1 to 6, there are two hexagon head screws. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. The selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: self-extinguishing polyamide. Screw material: galvanized steel. Plate material: galvanized steel. Base material: carbon steel. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, flexible, reinforced high-pressure hose with four layers of steel wire, used in water cutting and cleaning devices. Applications of the hose include cleaning chemical and energy installations, cleaning and cutting concrete structures, road surfaces, and cleaning steel surfaces. The hose is pressure tested and supplied with the appropriate certificate. Inner layer: polyamide. Reinforcement: two tight and two loose layers of steel wire. Outer layer: black polyurethane. Material of fittings and sleeves: carbon steel, galvanized. Working pressure: up to 1040 bar. Operating temperature: from -30°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose with reduced outer diameter and weight, and increased flexibility (type COMPACT). Confirmed hose lifespan of 400,000 impulse cycles. Standards: EN 857 2SC, SAE 100R16, ISO 11237-1. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 165 bar to 400 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +120°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
