Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsShort bottom plate for welding for the installation of a complete double DIN 3015 clamp type 301. Material: carbon steel or AISI 316L steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: BSP threaded. Direction of rotation: right. The specified maximum working pressure applies to continuous operation. Material: housing – aluminum, mounting plate and rear cover – cast iron. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose with an extended temperature operating range compared to standard hydraulic hoses. Confirmed hose lifespan of 400,000 impulse cycles. Standards: exceeds EN 853 2SN, ISO 1436-2SN, SAE 100R2S-AT. Inner layer: black synthetic rubber. Reinforcement: double steel braid. Outer layer: blue, oil-resistant synthetic rubber resistant to ozone and aging. Working pressure: from 80 bar to 400 bar depending on hose diameter. Operating temperature: from -40°C to +135°C (temporarily +150°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 116 quick coupling plug with internal thread and valve designed for hydraulic installations at very high pressures. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Supplied standard with a cap for protection against contamination. Material: hardened, galvanized steel. Sealing: NBR. Flow: 6 l/min (Δp = 4 bar). Nominal diameter: 2.5 mm. Working pressure: 1500 bar (connected coupling). Burst pressure: 3000 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-check valve type FPSU used in hydraulic systems as a component to allow free flow in one direction. The flow throttled in the opposite direction is regulated using a knob. Standard opening pressure 0.5 bar. Permissible flow direction: A → A1 (free), A1 → A (throttled). Material: carbon steel, galvanized (body), steel (spring, ball, knob). Sealing: NBR. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL-shaped tee fitting with internal thread (sealing on the front surface) and external UNF thread (o-ring in the groove of the flat front surface), type EVL. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShort bottom plate for welding for the assembly of DIN 3015 standard clamp type 100/101. For size group 0, there is one hole for a screw. For size group 1 to 6, there are two holes for screws. Material: carbon steel or AISI 316L steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: BSP threaded. Direction of rotation: right. The specified maximum working pressure applies to continuous operation. Material: housing and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMetal-rubber gasket for use in high-pressure installations (for quick couplings, adapters with external threads). Working pressure: up to 1000 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose for low-pressure installations. Characterized by high flexibility and light weight. Complies with standards: EN 854 2TE and EN45545-2. Inner layer: black, flame-retardant synthetic rubber. Reinforcement: single textile braid. Outer layer: black, flame-retardant synthetic rubber. Working pressure: from 40 bar to 80 bar (depending on hose diameter). Operating temperature: from -40°C to +100°C. For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug (cap) ORFS with internal UNF thread (sealing on the front surface), type VKA. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable throttle valve type FPSB used in hydraulic systems as a flow control element. Flow regulation is achieved via a knob. Permissible flow direction: A → A1, A1 → A. Material: carbon steel, galvanized (body), steel (knob). Sealing: NBR. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 232 screw-in quick coupling socket with external NPT thread and valve designed for hydraulic installations with very high pressures, where significant mechanical loads occur. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Can be connected/disconnected when there is residual pressure in the system. Steel caps must be ordered separately. Material: carbon steel, galvanized. Sealing: NBR. Flow: 1/4" - 16.4 l/min, 3/8" - 21.3 l/min (Δp = 4 bar). Working pressure: 700 bar. Burst pressure: 1/4" - 2100 bar (connected coupling), 3/8" - 1850 bar (connected coupling), 1/4" - 1800 bar (disconnected socket), 3/8" - 1850 bar (disconnected socket). Operating temperature: from -25°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° ORFS INTERLOCK fitting with internal UNF thread, flat sealing, for hose types 4SH, R13, and R15. Material: carbon steel, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 standard clamp type 101 (with top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. A clamp with a smooth surface for hoses and hoses is also available, marked with the letter H at the end of the index. For size group 0, there is one hexagon head screw, and for size groups 1 to 6, there are two hexagon head screws. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. Selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: aluminum. Screw material: galvanized steel. Plate material: galvanized steel. Base material: carbon steel. Operating temperature: up to +350°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: flanged. Direction of rotation: right. The specified maximum operating pressure applies to continuous operation. Material: housing and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose with reduced outer diameter and weight, and increased flexibility (COMPACT type). Designed for the most demanding applications. Excellent resistance to pulsating pressures. Thanks to a special rubber compound, the outer layer is antistatic, highly flame-retardant (exceeds MSHA requirements), highly resistant to ozone, weather conditions, abrasion, and UV radiation. It has MSHA certification. Standards: EN 857-2SC, SAE 100R 16S, ISO 11237-1. Installation: contact TUBES INTERNATIONAL®. Inner layer: black synthetic rubber. Reinforcement: double steel braid. Outer layer: black synthetic rubber. Working pressure: from 210 bar to 400 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsORFS blind plug (cap) with internal UNF thread (sealing on the front surface), type VKA. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFFP valve protecting the hydraulic system from oil loss in the event of sudden leakage of the installation (e.g., hose rupture). During normal operation of the system, the valve allows oil flow in both directions. In the event of a sudden increase in flow (e.g., hose rupture), the valve closes the oil flow in one direction. Permissible flow direction: A → A1 (free), A1 → A (valve). Material: carbon steel, galvanized (body), hardened steel (valve). Sealing: metal-metal. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° INTERLOCK angled fitting with internal BSP thread, 60° cone with O-ring, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMetric threaded nut intended for mounting DIN 3015 clamp standard type 100/101 and double DIN 3015 clamp type 201 on ABINS rail. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: flanged. Direction of rotation: right. The stated maximum working pressure applies to continuous operation. Material: body and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight ORFS fitting with external UNF thread (seal with O-ring and washer). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Enhanced hose lifespan compared to the standard confirmed by a test of 1,000,000 impulse cycles. Outer layer fire-resistant (MSHA). Standards: EN 856 R15, ISO 3862-1 R15, SAE 100 R15. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire (six for DN 32 ÷ DN 51). Outer layer: black, oil-resistant synthetic rubber. Working pressure: 420 bar. Operating temperature: from -40°C to +121°C (temporarily +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 232 screw-type quick coupling plug with internal NPT thread and valve designed for hydraulic installations with very high pressures, where significant mechanical loads occur. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Can be connected/disconnected when there is residual pressure in the system. Steel caps must be ordered separately. Material: carbon steel, galvanized. Sealing: NBR. Flow: 1/4" - 16.4 l/min, 3/8" - 21.3 l/min (?p = 4 bar). Working pressure: 700 bar. Burst pressure: 1/4" - 2100 bar (connected coupling), 3/8" - 1850 bar (connected coupling), 1/4" - 1490 bar (disconnected plug), 3/8" - 1500 bar (disconnected plug). Operating temperature: from -25°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable throttle valve type FPMB used in hydraulic systems as a flow control element. Flow regulation is achieved through a rotating ring. Permissible flow direction: A → A1, A1 → A. Material: carbon steel, galvanized (body). Sealing: NBR. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLocking nut designed for mounting FPB or FPU type valves. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 heavy clamp type 201 (with top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. Selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: self-extinguishing polyamide. Screw material: galvanized steel. Plate material: galvanized steel. Base material: carbon steel. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: flanged. Direction of rotation: left. The stated maximum operating pressure applies to continuous operation. Material: body and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 3000 flange connection with a compact design featuring a 24° DIN 2353 socket for metric tubing, intended for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Available as: L (light series), S (heavy series). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMulti-spiral hydraulic hose for high pressure. Hose with increased flexibility (bending radius 50% better than standard norm). Hose lifespan confirmed by a test of 500,000 impulse cycles. Outer layer flame-resistant (MSHA). Used in hydraulic power systems of large construction machinery and all types of hydraulic-driven equipment. Standards: EN 856 R15, SAE 100 R15, ISO 3862-1 R15. Inner layer: black synthetic rubber. Reinforcement: four layers of spiral steel wire. Outer layer: black synthetic rubber. Working pressure: 420 bar. Operating temperature: from -40°C to +120°C (hydraulic oil).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsORFS plug with external UNF thread, type ROV. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for CEJN 232 quick coupling with internal NPT thread. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsORFS adapter with external BSP thread (60° cone seal), type EVGE-B. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 standard clamp type 100 (without top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. For size group 0, there is one hexagon socket screw, and for size groups 1 to 6, there are two hexagon socket screws. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. Selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: aluminum. Screw material: galvanized steel. Base material: carbon steel. Operating temperature: up to +350°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: BSP threaded. Direction of rotation: right. The specified maximum working pressure applies to continuous operation. Material: housing and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLevel gauge designed for monitoring hydraulic oil levels, mounted on the side wall of the tank. Available in two versions: without a thermometer and with a thermometer. Oil enters the level gauge through openings in BANJO type mounting screws. Material: polyamide (body), aluminum (housing), polyamide (inspection port). Sealing: NBR. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° SAE 6000 flange connection with a compact design and internal BSP thread for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Used for installations at lower pressures. Characterized by high flexibility and light weight. Standards: EN 854 2TE. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: single textile braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 80 bar (depending on hose diameter). Operating temperature: from -40°C to +100°C. For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVentilation plug with filter mounted in the upper part of the tank. Prevents contaminants from entering the system during the suction of hydraulic oil. Used in areas with high dust levels. Material: aluminum (body), steel (cover), bronze sinter (filter element), guarnital (fiber washer).
