Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThreaded "T" type tee with external - internal - external BSP thread, series 3F type EM, has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThreaded "T" fitting with three external BSP threads, series 3F type EM, has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing "T" fitting for hose, type NA. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLateral connector LAUX 42 socket-plug with external BSP thread for wide applications, e.g.: for the transport and unloading of bulk materials (grains, flour, feed, granules, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a connector for a medium other than water, attention should be paid to the correct selection of seal material. The standard sealing is an EPDM gasket. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: from -50°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLAUX 42 lever connector tee plug-socket / socket with wide applications, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granules, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a connector for a medium other than water, attention should be paid to the correct selection of gasket material. The standard sealing is an EPDM gasket. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Tightness under vacuum. Operating temperature: from -50°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThreaded bushing with a control hole, manufactured according to standard EN 14424, intended for a screwed fuel nozzle. Thread type: metric. Material: brass or chrome-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNFH HEAVY DUTY clamp sleeve for crimping rubber and plastic industrial hoses. Designed for CN type ends and couplings. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Diameter D3 [mm] - lock diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNFL clamping sleeve for crimping rubber and plastic industrial hoses. Designed for CN type ends and couplings. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Diameter D3 [mm] - lock diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLDR, LD, LR type sleeves are designed for clamping stainless steel hygienic ends (with a corrugated tail) type NH-xxK-xxx and ends with a tail for hose under a shell clamp RS, e.g., TW-KRS-xxx, NH-xxR-xxx in industrial hoses (rubber and plastic with textile reinforcement, possibly with a reinforcing spiral - suction and pressure hoses). The sleeve should be selected considering the internal diameter Dw and external diameter Dz of the hose. The length of the sleeve L may be slightly (a few mm) greater than the length of the tail of the end Lk. LR sleeves - only for ends under the shell clamp, LD - only for ends with a corrugated tail, LDR - sleeves for both types of ends. Diameter D1 [mm] - external diameter. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - locking diameter. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal, two-part, full-bore ball shut-off valve of European manufacture, made from casting, with a flange for direct actuator mounting compliant with ISO 5211, intended for industrial installations. It can be used for air, neutral gases, water, chemicals, petrochemical products, etc., free from solid contaminants, in accordance with the chemical resistance of the valve materials. It features a stem protection against blowout. Complies with the Pressure Equipment Directive PED 2014/68/EU: a) for sizes up to DN25 (1”) inclusive within good engineering practice (SEP), according to Article 4, paragraph 3 (without CE marking); b) for sizes from DN32 (1.1/4”) for liquids group 1 and 2 and for gases group 2 (other than hazardous) – CE marking, category I. Compliant with the RoHS material directive 2011/65/EU and REACH regulation 1907/2006. The stated minimum operating temperature applies to the valve emptied of freezing liquids. Body material: nickel-plated brass. Ball material: chrome-plated brass. Ball sealing: PTFE. Stem sealing: 2 x FKM (viton) o-ring. Connection: BSP thread (ISO 228-1). Operating temperature: from -20°C to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal shut-off ball valve (tap) of European manufacture, made of casting, with a straight aluminum lever, with a hose connection and aerator, intended for industrial and water supply installations. It can be used for water, chemicals, petrochemical products, etc., free from solid contaminants, in accordance with the chemical resistance of the valve materials. It features a stem blow-out protection. Complies with the Pressure Equipment Directive PED 2014/68/EU, regarding good engineering practice (SEP), according to Article 4, paragraph 3 (without CE marking). Compliant with the RoHS material directive 2011/65/EU and REACH regulation 1907/2006. The working pressure depends on the operating temperature. The specified minimum operating temperature applies to the valve emptied of freezing liquid. WARNING: When used outdoors, it is necessary to drain the valve of water at negative ambient temperatures! Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Aerator material: polyamide (PA). Ball sealing: PTFE. Stem sealing: 2 x NBR o-ring. Connection: BSP thread (ISO 228-1). Operating temperature: from -20°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRailway nut gasket compatible only with KGW type end nuts. Material: PTFE. Operating temperature: from -70°C to +220°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal for sealing connections to Hansen Beverage quick coupling plug 2-HG and 2-HL. Temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal for sealing connections to Hansen Beverage quick couplings 2-KG-F and 2-KL-F. Temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal for Hansen Beverage quick coupling 2-KG-F and 2-KL-F ensuring the tightness of the quick coupling. Temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection seal with internal thread for NiTO quick coupling. Material: NBR. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket FF for 4" TTMA flange. The permissible working pressure at which the gasket can be used depends on the temperature and type of medium (selection should be agreed with TUBES INTERNATIONAL®). Material: EPDM, SPETOGRAF GUS31, PTFE, viton. Working pressure: up to 60 bar (EPDM), up to 100 bar (SPETOGRAF GUS31), up to 300 bar (PTFE). Operating temperature: from -30°C to +120°C (EPDM), from -200°C to +650°C (SPETOGRAF GUS31), from -200°C to +220°C (PTFE), from -20°C to +200°C (viton).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket intended for connections with internal threads. For food applications. Not resistant to greases and oils. Material: silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket for CAMLOCK AU and DU connections designed to seal the internal thread connection with the external cylindrical thread. Material: polyurethane. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket IBC for flange PN made according to standard PN-EN 1514-1. The permissible working pressure at which a given gasket can be used depends on the temperature and type of medium (selection should be agreed with TUBES INTERNATIONAL®). When selecting a gasket, attention should be paid to the outer diameter dimension, appropriate for the flange class. For example: gasket DN 10 PN40 is suitable for classes PN10, PN16, and PN25. Material: SPETOGRAF GUS31. Working pressure: up to 100 bar. Operating temperature: from -200°C to +650°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCover gasket MB (for tank truck connections) type TWF (for 4" connection, use O-ring gasket type TWO). Material: ethylene-propylene-diene rubber (EPDM). Temperature range (approximate): from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCover gasket MB (for tank truck connections) type TWF (for 4" connection, use O-ring gasket type TWO). Material: polyurethane (PUR). Temperature range (approximate): from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsKKG gasket intended for the socket of the LAUX 42 lever coupling. Good resistance to ozone and weather conditions. Suitable for water and air. Material: EPDM. Operating temperature: from -50°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsKKG gasket intended for the socket of the LAUX 42 lever coupling. Resistant to mineral oils, gasoline, and most chemicals. Not suitable for solvents containing ketones. Material: viton. Operating temperature: from -30°C to +250°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal for symmetrical joints standard GOST no. 28352-89, 2217-66 (Russia). Material: NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket for Guillemin connection. Material: EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket for Guillemin connection. Material: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal for symmetrical connections standard NOR. Material: NBR. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal for symmetrical joints standard ROTTA ROTH (Russia). Material: NBR. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal for symmetrical connections standard SMS (Sweden). Material: NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTRI-CLAMP coupling gasket series 3C type EM. Material: EPDM, FKM, Gylon® and PTFE.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProfile gasket for TW (tank truck) connection type GSD (for 4" connection, O-ring type TWO is used). Material: polyurethane (PUR). Temperature range (approximate): from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHygienic RJT joint gasket according to BS 4825-5. Operating temperature: from -50°C to +200°C. Material: silicone.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOR coupling hanger for mounting on a smooth surface. Convenient accessory designed for easy storage of couplings by placing a coupling of a specific size DN onto the hanger and then twisting it to secure it against loss. Intended for sizes such as DN52, DN75, and DN110. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° quick coupling plug for hose with nut and valve is intended for gas detection, medical devices, chemical analyzers, inkjet printing, as equipment for optical devices, etc. The effectiveness of the connection is indicated by an audible click. Length L [mm] - total length. Material: acetal (NBR o-ring). Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized 90° quick coupling plug without valve with hose end intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 8.3 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° quick-connect plug with valve for hose is intended for gas detection, medical devices, chemical analyzers, inkjet printing, as equipment for optical devices, etc. The effectiveness of the connection is indicated by an audible click. Length L [mm] - total length. Material: acetal (NBR o-ring). Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized 90° quick-connect plug with a hose nut, intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized 90° quick-connect plug with a hose nut, intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 8.3 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDN 6 quick coupling plug with hose end, without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 6 mm. Working pressure: 25 bar. Material: brass (plug body).
