Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part clamp, USA version, with hooks ("claws"), made of high-quality ductile cast iron galvanized (with yellow passivation free of hexavalent chromium). Designed for hose mounting, with a connection to the hose part with a locking mechanism. Material: galvanized ductile cast iron. With proper installation, appropriately selected hose, and fitting, working pressure up to 25 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRUBBER P-CLIP clamp compliant with DIN 3016 standard recommended for the safe and vibration-damping installation of pipes, hoses, hose bundles, corrugated electrical installation tubes (hose sheaths), etc., for which there is a risk of abrasion and damage. This type of clamp has a wide range of applications, including: agricultural and construction machinery, internal combustion engine construction, railway industry, electrical equipment, household appliances, etc. It is made from a single piece of bent steel strip and a rubber flange. The holes at both ends of the strip are reinforced with steel plates, ensuring resistance to compression under high mechanical loads. The strip is made of AISI 304 stainless steel (W4), and the profile is made of EPDM rubber resistant to water, abrasion, temperature changes, and aging. The W4 version is recommended for use in the marine industry. The clamp does not include a screw, washer, or nut. Material: AISI 304 steel (strip), EPDM rubber (flange). Strip width: 25 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe UNI-GRIP S type pipe clamp is designed for connecting and repairing metal pipes (axially fixed connection, with metal elastic rings embedding into the pipe surface and a rubber seal). Applications: water, gas, oils and fuels, other hydrocarbons, air. Material version: AISI 316Ti steel (housing, screws - class A4-80, solid pins). Sealing: NBR rubber. Operating temperature: from -20°C to +80°C. Nominal pressure: PN 16 (pressure class for applications in shipbuilding, marine industry; safety factor 4:1, assuming a positive result from a one-time pressure test at four times the maximum pressure, after which the clamp cannot be reused). Maximum operating pressure: up to 70 bar, depending on the clamp diameter (for other industrial applications and static conditions, safety factor 1.5:1, assuming a positive result from a pressure test at 150% of the maximum operating pressure, after which the clamp can be reused multiple times). The pressure values apply to the installation of clamps on round steel pipes with a minimum wall thickness, installation according to the instructions, and tightening with a torque wrench specified on the clamp.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShell clamp designed for securing industrial hoses on smooth or corrugated ends with a protective flange. It is closed by tightening in a vice and driving in a stainless steel mounting pin (included). It features smaller external dimensions than screw-type shell clamps. Material: clamps - aluminum, pin - stainless steel. Working pressure: 25 bar (with appropriately selected hose and end EN 14420-3).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEasy to install and adjust clamp with double wire and screw tightening system designed for quick fastening of lightweight and low-pressure hoses with an external spiral. Smooth edges of the round wire minimize hose damage. The clamp is generally used in ventilation systems or in household appliances. Ideal for industrial and domestic use. Maximum medium pressure depends on the type of hose and the shape of the connecting part. Material: galvanized spring steel (screw made of galvanized steel).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part clamp, design similar to DIN 20039 A standard, with separate inserts - "tongues" for clamping. Intended for mounting ends and connections with a hose part ("tail") without a lock (safety flange). Material: AISI 316 steel. With proper installation, appropriately selected hose and end fitting, working pressure up to 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTRI-CLAMP coupling clamp series 3C type EM. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand clamp with a worm drive equipped with a spring for compensating dimensional changes in the connection (shrinkage of the hose due to cold flow of the material or due to large temperature variations). The spring consists of a set of 10 disc springs (washer springs) – washers under the head of the screw. This ensures the maintenance of the clamp's grip and sealing around the entire circumference of the hose, preventing leaks from the installation. The spring mechanism of the clamp allows for automatic adjustment of its diameter while maintaining the clamp's grip. Particularly recommended in cases of large temperature changes for heavier applications. Proper clamping of the band is indicated by the screw end protruding beyond the housing of the lock and the flattened disc springs. The internal insert of the clamp protects the hose surface from damage. Installation tightening torque 8.5 Nm (max. 14.1 Nm). Material of the screw/lock: galvanized carbon steel. Material of the band: stainless steel 300. Band width: 16 mm (5/8").
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEZYCLIK™-P low-profile snap-on clamps made of black polyamide (PA66) resistant to UV rays. A version made of polypropylene (PP) and glass fiber reinforced polyamide is also available. The clamps are specially designed for securing hoses in confined spaces. The unique design of the clamps ensures quick and reliable fastening. Note: the snap-on clamp does not have adjustable clamping; the diameter when closed must be precisely matched to the hose. Operating temperature: from -40°C to +125°C (PA66), from -40°C to +60°C (PP).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SAFETY LOCK retaining ring is designed to prevent uncontrolled disconnections of CAMLOCK couplings during hose handling, as well as during unloading operations due to medium pulsation. It is characterized by ease of installation and removal, making it an alternative choice to other forms of safety devices available on the market.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLid for pallet container with internal thread DIN EN 12713 and gasket. Material: polypropylene. Sealing: EPDM. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCover for IBC pallet container with internal BSP threaded opening. The opening can be used for filling the container. The cover is supplied with a gasket. Material: polypropylene. Sealing: EPDM. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection with internal thread 11/16″-18 UNF allowing connection to socket type 2-HG and 2-HL Hansen Beverage quick coupling. On the other side, finished with internal or external thread. Working pressure: 15 bar. Operating temperature: up to +130°C. Material: AISI 303 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal threaded connection 9/16″-18 UNF allowing connection to the type 2KGF plug of Hansen Beverage quick coupling. On the other side, finished with internal or external thread. Working pressure: 15 bar. Operating temperature: up to +130°C. Material: AISI 303 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector - "L" tee with external BSPT thread type AI 13230 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 14 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass reduction (reduction, ring, nut) for use with couplings or fittings type AI 13000 (external diameter range of connected pipes from 4 to 12 mm). The tightness of the connection is achieved by compressing the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using the nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing coupling with external BSP thread and internal BSP thread intended for cold and hot water. Material: chrome-plated brass. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducer for quick couplings for water NiTO with external threads. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducer for quick couplings for water NiTO with external and internal thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngle distributor with internal BSP threads for air distribution mounting. Material: brass. Working pressure: up to 63 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSimple distributor with BSP internal threads for air distribution mounting. Material: brass. Working pressure: up to 63 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe EWO air distributor allows for the installation of two or three shut-off valves, which can be closed individually as needed. It has two shut-off valves and two external threaded outlets equipped with fittings for 6 mm or 9 mm hoses. Mounting position - any. Body material: brass. Operating temperature: from -10°C to +90°C. Working pressure: 40 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe EWO air distributor allows for the installation of two or three shut-off valves, which can be closed individually as needed. It has two shut-off valves and two outlets with external threads. Mounting position - any. Body material: brass. Operating temperature: from -10°C to +90°C. Working pressure: 40 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAuxiliary long screw DIN912 for mounting shell clamps RS and SC, used during assembly to enable proper compression of the clamps on the hose. After compression, they are subsequently replaced with short mounting screws from the clamp set. Material: galvanized carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight coupling with external BSP threads, series 3F type EM. It has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. The sealing of the coupling connection in polypropylene is done with an EPDM gasket, and in the case of polyvinylidene fluoride, with an FKM gasket. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHand pliers enable easy and quick assembly and disassembly of DCL clamps. The comfortable ergonomic handle ensures a secure grip. Handle color: red.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeak-free flat-face quick couplings designed for fluid transfer (water, oil, chemicals, etc.). The flat contact surfaces minimize potential fluid leakage and prevent air inclusion while allowing for easy maintenance of the coupling's cleanliness. Sockets and plugs are available with or without shut-off valves, enabling three coupling configurations: free flow (sockets and plugs without a valve), one-sided shut-off (socket with a valve, plug without a valve), and two-sided shut-off (leak-free, socket and plug with a valve). Protective caps are available to shield the quick coupling from contaminants when disconnected. To ensure additional safety, when interchanging socket-plug connections is not permissible, color coding of the quick coupling is possible. Standard identification rings are offered in green, with optional colors: black, blue, red, white, yellow, or so-called key coding (the socket and plug have additional grooves and protrusions that only properly matched will allow the coupling to connect). Material: nickel-plated brass. Sealing: NBR, Viton, EPDM. Working pressure: 20 bar. Operating temperature: from -15°C to +100°C - NBR, from -20°C to +150°C - EPDM, from -20°C to +205°C - Viton (up to +125°C for identification rings).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIdentification label for the Band-It® Tie-Lok® identification system for self-labeling hoses available in three dimensions: 51x19, 63.5x38, and 89x19. Material: AISI 316 stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSelf-locking band partially coated with epoxy (increases corrosion protection, non-toxic material, halogen-free) designed for easy and simple manual installation or using a tensioning and cutting tool (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation, and high and low temperatures. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Giant tape, made of AISI 201 steel. The standard is a basic clamping system using roll tape, formed into bands on hoses of any diameter (a double loop of tape is recommended). Separate clips with "noses" must be purchased to secure the end of the tape after bending. The GIANT version is intended for heavy-duty applications (for hoses with large diameters - above 150 mm). Installation using tool BD-G40299. Length: 30.5 m.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe Band-It® Junior tape is a clamping system that uses tape in pre-formed sections shaped into double-loop bands with an integrated fastener. The smooth surface of the tape and its proper installation on a non-corrugated hose create a tight attachment of the end, preventing leaks into the clamp. Installation is done using the BD-C00189 tool with the pre-forming adapter BD-J00199. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe tape in sections for the Band-It® Ultra-Lok® system made of AISI 201 steel is intended for the most demanding applications. The double loop increases the strength of the clamp. The smooth surface of the tape and its proper installation on a non-corrugated hose create a tight fitting of the end, preventing leaks into the clamp. Installation using electric tools BD-UL9010 or BD-UL4000B. For mounting 1/2" clamps to the mounting device, a spacer BD-M09387 should be used. Material: AISI 201 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass "T" fitting with internal BSP thread. Material: brass. Working pressure: up to 63 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass "T" fitting with 2 x internal BSP threads and 1 x external BSP thread. Material: brass. Working pressure: up to 63 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsY-branch with internal BSP thread and Eurostandard DN7.2 quick coupling sockets for use in industrial installations, e.g., for air. Material: brass. Working pressure: up to 35 bar. Operating temperature: up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsY-branch lever coupling FERRARI with socket and 2 x plug coupling, type F.35, for use in agriculture, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment, sewage disposal, environmental protection. Material: carbon steel, galvanized. Sealing: NR-SBR rubber. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° elbow with internal BSP thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsANFOR tee 1 x socket - 2 x plug for use in agricultural farms, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsANFOR tee 2 x socket - 1 x plug for use in agricultural farms, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on the size of the connection). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThreaded tee type "T" with three internal BSP threads, series 3F type EM. The tee has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
