Is the Plug cap for NiTO 1" water quick connector, brass compatible with potable water systems and safe at temperatures up to +80Â°C?

Yes. The Plug cap for NiTO 1" water quick connector, brass is suitable for potable water systems and safe up to +80Â°C based on the provided specifications: chrome-plated brass construction (compatible with drinking water when brass is appropriately plated/coated), working pressure up to 25 bar, operating temperature up to +80Â°C, and NBR (nitrile) sealing. NBR is commonly used for water seals and withstands temperatures within the specified range. Ensure local potable-water regulations and any required approvals/certifications are met for your installation.

Can the Plug cap for NiTO 1" water quick connector, brass withstand 25 bar pressure and maintain a reliable NBR seal?

Yes. The Plug cap for NiTO 1" water quick connector, brass is specified for working pressures up to 25 bar and uses an NBR (nitrile) seal. Chromeâplated brass body provides mechanical strength and corrosion resistance, while NBR is a common sealing material for water applications and temperatures up to +80Â°C, so under those stated conditions it should maintain a reliable seal at 25 bar. Ensure installation is correct, avoid chemical exposures outside NBR compatibility, and respect the +80Â°C limit for longâterm reliability.

Does the Plug cap for NiTO 1" water quick connector, brass resist corrosion in chlorinated water systems?

Yes. the Plug cap for NiTO 1" water quick connector, brass offers good corrosion resistance in chlorinated water systems, with some practical limits. Why: the part is made of chrome-plated brass. Brass alloys are commonly used for potable water fittings because they resist general corrosion and dezincification better than plain copper or some other alloys. The chrome plating adds a protective, more corrosion-resistant outer layer that helps prevent surface attack, pitting and staining in treated water. Caveats: - Chlorinated water is more aggressive than plain freshwater. Over long service periods, especially at higher chlorine concentrations, elevated temperatures, or in stagnant conditions, brass can still suffer dezincification or surface corrosion if the plating is damaged. - The specified sealing material is NBR (nitrile rubber), which is compatible with typical chlorinated water at normal concentrations and temperatures up to the partâs rated +80Â°C, but higher chlorine levels or elevated temperatures can shorten elastomer life. - Working pressure up to 25 bar is suitable for most water systems; operating temperature up to +80Â°C is within typical hot-water ranges but higher temps accelerate corrosion and elastomer aging. Practical recommendation: For standard municipal chlorinated water at normal concentrations and temperatures below +80Â°C, the Plug cap for NiTO 1" water quick connector, brass should perform well. For aggressive conditions (high chlorine, high temperature, long stagnation, or critical applications), consider specifying dezincification-resistant (DZR) brass or stainless steel and confirm elastomer compatibility.

Plug cap for NiTO 1″ water quick connector, brass

All products, Quick couplings for water/

Additional information

Material	B – brass (bronze)

Blind plug for quick coupling water NiTO 1″. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
NT-7350ZA3	1" quick coupling plug cap, chrome-plated brass	-	25	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Blind plug for quick coupling water NiTO 1″. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR.