Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal kit for Gromelle series MLDB quick coupling socket. Material: viton. Operating temperature: -20°C to +200°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal kit for Gromelle series MLDB quick connector. Material: viton. Operating temperature: -20°C to +200°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGOST connector with internal thread designed for transmission and handling installations in pressure and suction systems for liquid and bulk substances. Not suitable for steam and gas transmission. The connector has a symmetrical design of the connection part. Material: aluminum. Working pressure: 10 bar. Sealing: NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGOST connector with internal thread intended for transmission and handling installations in pressure and suction systems for liquid and bulk substances. Not suitable for the transmission of steam and gases. The connector has a symmetrical design of the connection part. Material: bronze. Working pressure: 10 bar. Sealing: NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGOST connector with external thread intended for transmission and handling installations in pressure and suction systems for liquid and bulk substances. Not suitable for the transmission of steam and gases. The connector has a symmetrical design of the connection part. Material: aluminum. Working pressure: 10 bar. Sealing: NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGOST connector with external thread intended for transmission and handling installations in pressure and suction systems for liquid and bulk substances. Not suitable for the transmission of steam and gases. The connector has a symmetrical design of the connection part. Material: bronze. Working pressure: 10 bar. Sealing: NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGOST coupling with hose end intended for transmission and handling installations in pressure and suction systems for liquid and bulk substances. Not suitable for steam and gas transmission. The coupling has a symmetrical design of the connection part. Material: aluminum. Working pressure: 10 bar. Sealing: NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGOST coupling with hose end intended for transmission and handling installations in pressure and suction systems for liquid and bulk substances. Not suitable for steam and gas transmission. The coupling has a symmetrical design of the connection part. Material: bronze. Working pressure: 10 bar. Sealing: NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGUILLEMIN connector with external BSP thread intended for industrial and bulk handling installations of powders and granules. Not suitable for the transmission of steam and gases. The connector features a symmetrical design of the connection part. Manufactured according to standard EN 14420-8/NF-E-29572. Material: aluminum. Working pressure: 16 bar. Sealing: black FKM-VITON rubber. Operating temperature: from -10°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGUILLEMIN coupling with hose end, with lock (mounting with a shell clamp, compression sleeve, or straps) intended for industrial and bulk material handling installations, granules. Not suitable for steam and gas transmission. The coupling has a symmetrical design of the connection part. Manufactured according to standard EN 14420-8/NF-E-29572. Material: AISI 316 steel. Working pressure: 16 bar. Sealing: black FKM-VITON rubber. Operating temperature: from -10°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete MSL coupling for hose with aluminum shell clamp EN 14420-3 (DIN 2817), finished with internal thread and brass nut, intended for connecting components of liquefied gas (LPG) installations. Material of the fitting: carbon steel, galvanized. Working pressure: 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete MSL coupling for hose with aluminum shell clamp EN 14420-3 (DIN 2817), finished with internal thread and hexagonal nut, brass, intended among others for connecting components of liquefied gas (LPG) installations. Material of the end: carbon steel, galvanized. Working pressure: 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFemale part of the HAMMER LUG connector type 1502 with internal NPT thread. Material: chrome-molybdenum steel 4130. Connection: NPT thread. Sealing: metal/metal (cone) + additional edge seal (NBR). Pressure: 15000 PSI (1034 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFemale part of HAMMER LUG connector type 602 with internal NPT thread. Material: chromium-molybdenum steel 4130. Connection: NPT thread. Sealing: metal/metal (cone) + additional edge seal (NBR). Pressure: 6000 PSI (414 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMale part of the HAMMER LUG connector type 1502 with internal NPT thread. Material: chrome-molybdenum steel 4130. Connection: NPT thread. Pressure: 15000 PSI (1034 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe most popular type due to the high mechanical resistance of the material. Widely used for standard applications (air, water, oil, gas) but also for "choke and kill" connections, fracturing, and cementing. Set: male part, female part + nut. Color: red (male, female parts), blue (nut). Material: chrome-molybdenum steel 4130. Connection: for welding. Sealing: metal/metal (cone) + additional edge seal (NBR). Pressure: 15000 PSI (1034 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHAMMER LUG coupling type 602 for general use (for air, gas, oil transmission). It features a replaceable edge seal (NBR) that reduces vibration of the flowing medium and provides protection for the seal (metal/metal) against corrosion. Set: male part, female part + nut. Color: orange (male, female parts), black (nut). Material: chromium-molybdenum steel 4130. Connection: GW NPT. Sealing: metal/metal (cone) + additional edge seal (NBR). Pressure: 6000 PSI (414 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC connector with external trapezoidal thread compliant with DIN EN 12713 standard and hose end. The trapezoidal threads, which are standardly equipped on IBC connectors, are 100% compatible with the threads on IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRailway loading connector with internal thread 5.1/2" DIN 11 - nut, with a smooth "tail" for hose mounting to a shell clamp (or crimping sleeve). Material: aluminum (applies to the end piece). Working pressure: 16 bar. Operating temperature: from -20°C to +65°C (or a wider range depending on material, sealing, and application).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNOR connector with a symmetrical STORZ type connection part designed according to the Norwegian national standard. Widely used in fire protection systems on ships, industry, and mobile water supply. Material: bronze. Sealing: NBR. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary joint type 1800 SR designed for connections of rigid or flexible hoses, wherever there is rotary motion or oscillation between individual parts of the installation. Material: nickel-plated steel or AISI 316L steel. Sealing: NBR, viton, teflon. Operating temperature: up to +150°C (up to +120°C for AISI 316L steel). Connection: BSP male, BSPT female. Rotations: free, oscillating. Working pressure: from 75 bar to 350 bar - depending on the size of the joint and the type of steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSJ swivel joint with a single bearing, designed for connections of rigid or flexible hoses, where it is required that no torsional moment is transferred to other elements of the installation. It is used in the chemical and petrochemical industries. The joint is not resistant to high bending moments; in such cases, it is recommended to use a swivel joint with a double bearing - heavy duty (available on request). The joint meets the requirements of the Pressure Equipment Directive 97/23/EC (PED), TDT, TÜV, Apragaz. Various combinations of the following connections are also available on request: BSP thread, NPT, BSPT, ACME, for welding, PN flanges, ASA, TW, TTMA, grooved joints. Material: aluminum. Operating temperature: from -40°C to +250°C. Rotations: slow, oscillating. Working pressure: up to 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSJ swivel joint with a single bearing, designed for connections of rigid or flexible hoses, where it is required that no torsional moment is transferred to other elements of the installation. It is used in the chemical and petrochemical industry. The joint is not resistant to high bending moments; in such cases, it is recommended to use a swivel joint with a double bearing - heavy duty (available on request). The joint meets the requirements of the Pressure Equipment Directive 97/23/EC (PED), TDT, TÜV, Apragaz. Various combinations of the following connections are also available on request: BSP thread, NPT, BSPT, ACME, for welding, PN flanges, ASA, TW, TTMA, grooved joints. Material: brass. Operating temperature: from -40°C to +250°C. Rotations: slow, oscillating. Working pressure: up to 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVapor recovery connection CVR with probe without valve (CAMLOCK C with hose end). Available version with valve. For medium: gasoline, diesel, ULSD, crude oil, E20 (20% ethanol and 80% gasoline), E100 (100% ethanol), B20 (20% biodiesel and 80% diesel), B100 (100% biodiesel). Sealing: NBR. Working pressure: 6 bar. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVapor recovery connection DARVR with probe without valve (CAMLOCK D / CAMLOCK A). For medium: gasoline, diesel, ULSD, crude oil, E20 (20% ethanol and 80% gasoline), E100 (100% ethanol), B20 (20% biodiesel and 80% diesel), B100 (100% biodiesel). Material: aluminum. Sealing: NBR. Working pressure: 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVapor recovery connection ZPO with valve (CAMLOCK A with BSP thread). For medium: gasoline, diesel, ULSD, crude oil, E20 (20% ethanol and 80% gasoline), E100 (100% ethanol), B20 (20% biodiesel and 80% diesel), B100 (100% biodiesel). Material: aluminum. Sealing: NBR. Working pressure: 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsROTA ROTH connector with hose end is designed for transmission and handling installations in pressure and suction systems for liquid and bulk substances. It is not suitable for the transmission of steam and gases. It has a symmetrical design of the connection part. Material: bronze. Working pressure: 10 bar. Sealing: NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSMS connector (Sweden) with hose end is designed for transmission and handling installations in pressure and suction systems for liquid and bulk substances. Not suitable for steam and gas transmission. The connector has a symmetrical design of the connection part. Material: bronze. Working pressure: 10 bar. Sealing: NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLoading connection socket TW type MK with internal BSP thread and E-CTFE lining. Manufactured according to standard EN ISO 14420-6 (formerly DIN 28450). Used for the most chemically aggressive media, for which the corrosion resistance of AISI 316 stainless steel is insufficient. E-CTFE is characterized by very high chemical resistance over a wide temperature range (approximately from -40°C to +130°C). It is resistant to all acids, alkalis, and other aggressive substances (pH range 1 ÷ 14). It has high mechanical properties, particularly hardness and abrasion resistance. Material: stainless steel. Connection sealing (seal type GSD, for 4" type TWO): hypalon. Thread sealing (seal type GD): teflon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal BSP threaded connector with a rotating nut and hose end, type MSL, is designed for mounting to rubber hoses and certain industrial plastic hoses. Fastened using shell clamps EN 14420-3 / DIN 2817 (only clamps RS 636... and RS-637...). They can also be clamped with appropriate crimping sleeves. Working pressure: 25 bar. Material: hose end - stainless steel AISI 316, rotating nut - brass. Sealing: flat gasket (standard PTFE included). Operating temperature: from -20°C to +65°C according to EN-14420.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ coupling with internal BSP thread and internal BSP thread intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed diameter of flow. With a symmetrical design of the connecting part, it easily connects with each other. Elements with the same hook spacing can be connected. Material: aluminum. Working pressure: 16 bar. Seal: white NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ coupling with external BSP thread and external BSP thread intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed flow diameter. Symmetrical design of the connection part, allowing for easy connection. Elements with the same hook spacing can be connected. Material: aluminum. Working pressure: 16 bar. Seal: white NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee connector for hose with GZ BSP series 1B type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Installation is done by pushing the hose onto the integrated connecting sleeve, and locking occurs via a knurled nut that clamps the flexible hose onto the connecting sleeve. Multiple installations are possible. It is designed for flexible hoses made of materials (PVC, silicone) reinforced with a specific wall thickness. The end withstands short pressure spikes up to 30 bar at a temperature of +20°C. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDN 6 quick coupling socket with "tail" for hose, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. It can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 6 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (socket body, connection, valve sleeve), stainless steel (spring, ring, balls).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass "T" fitting with 2 x BSP internal threads and 1 x BSP external thread. Material: brass. Working pressure: up to 63 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 90 quick coupling socket with hose end without valve. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° brass elbow with internal and external BSP threads. Material: brass. Working pressure: up to 63 bar. Operating temperature: from -10°C to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 30 quick coupling plug with external thread and valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Valve sealing: viton. Working pressure: 15 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDN 9 quick coupling socket with "tail" for PUSH-ON hose, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. It can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 9 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (socket body, connection, valve sleeve), stainless steel (spring, ring, balls).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDN 9 quick coupling plug with external thread BSP, BSPT, NPT, and metric, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, steam. Flow diameter: 9 mm. Working pressure: 15 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (plug body, valve), stainless steel (spring).
