Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAND logic element. Control by compressed air, reset by compressed air. Mounting in any position. Material: body - plastic, spindle - aluminum, sealing - NBR. Nominal flow: 100 Nl/min at 6 bar with a pressure drop of 1 bar. Built-in plug couplings for 4 mm tubing. Operating temperature: from -10°C to +60°C. Working pressure: 0 to 8 bar. Control pressure: 1.5 to 8 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter FIL series BIT recommended for decentralized compressed air systems or in direct proximity to actuators. Size: 1/8", 1/4". Filtration degree: 5 µm, 20 µm, 50 µm. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 1200 l/min - 1/8", 1/4" (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSide plug coupling with external thread, type R45, intended for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / Details3/2 shut-off valve used as a switching and venting valve for the pneumatic system. When the control sleeve is moved back, the pneumatic system is vented, and when the sleeve is moved forward, the pneumatic system is pressurized. Working pressure: 10 bar. Operating temperature: from -10°C to +80°C. Body material: chrome-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsManual shut-off valve V3V series SYNTESI®, without end connections, is used to separate the working system from the supply air. It is a three-way, two-position, normally closed valve. In the closed position, it cuts off the supply air and vents the system, making it particularly useful for maintenance work. It has a system allowing for the installation of two padlocks of size SY1 or three padlocks of size SY2 with a diameter of 3 mm. Alternatively, a version with a Ø 7 hole for a single padlock is available. On the rear and front surfaces of the valve, there are auxiliary connections (1/8” for size SY1 and 1/4” for size SY2) for connecting a pressure gauge, pressure sensor, or for additional air intake. Size: SY1, SY2. Connection: BSP thread 1/8", 1/4", at the front and rear. Supply pressure: up to 15 bar, depending on size. Operating temperature: from -10°C to +50°C. Nominal flow: up to 4000 l/min, depending on size (at an inlet pressure of 6 bar and Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, with a front lever and roller, commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled plug connector with external conical thread, type R39C, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPneumatic-electric relay 2A NO/NC 2 MT (version with two-meter hose). Supply pressure: up to 15 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOP shut-off valve series STP-U with a check valve and plug-in connection, primarily used as a safety valve. When installed on the actuator's supply connections, it allows airflow only in the presence of a pneumatic control signal. The actuator is stopped after a drop in control pressure. Operating pressure: 0.5 ÷ 10 bar. Operating temperature: from -10°C to +60°C. Body material: nickel-plated brass. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete double BANJO plug connector, type R56, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini SDR series G pressure reducer with internal BSP thread, manually adjustable, maintains a constant output pressure regardless of fluctuations in inlet pressure. The package includes a mounting bracket and a pressure gauge. Size: 100, 200. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: BSP female M5 ÷ 1/4". Flow rate: 150 l/min - size 100, 500 l/min - size 200 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLogical OR element. Control by compressed air, reset by compressed air. Mounting in any position. Material: body - plastic, spindle - aluminum, sealing - NBR. Nominal flow: 100 Nl/min at 6 bar with a pressure drop of 1 bar. Built-in plug couplings for 4 mm tubing. Operating temperature: from -10°C to +60°C. Working pressure: 0 to 8 bar. Control pressure: 1.5 to 8 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Detailscoupling with an extended spigot and external thread, type R18, designed for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGAL series GA lubricator with internal BSP thread ensures proper lubrication of devices with oil mist in pneumatic installations. The package includes a mounting bracket/holder. GA connection sets (L, T, U shapes) are used for connecting individual components. Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: from -5°C to +70°C. Connection: BSP 1/8" to 1". Flow rate: 2750 l/min - size 200, 5000 l/min - size 300, 8800 l/min - size 400, 14500 l/min - size 600 (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FIL filter series SYNTESI® without end connections is used for removing solid and liquid contaminants from the air produced by the compressor. Size: SY1, SY2. Filtration degree: 5 µm, 20 µm, 50 µm. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: up to +50°C. Connection: BSP 1/8" to 3/8" for SY1 and BSP 3/8" to 1" for SY2. Additional connection for pressure gauge or fittings: BSP 1/8" for SY1 and 1/4" for SY2. Condensate drain: manual/semi-automatic (RMSA), automatic float (RA). Flow rate: 1300 l/min - 1/8", 1650 l/min - 1/4", 1750 l/min - 3/8" (SY1), 4500 l/min - 3/8" (SY2), 5200 l/min - 1/2", 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, lever with roller, commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL plug connector with a fitting, type R48, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBanjo elbow body, type R13, for screws of series D, intended for connections of pipes and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic side. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRegulator MR SR, series BIT. Version used when rapid venting of the pneumatic system is required after a drop in supply pressure. The SR reducer should be installed between the actuating valve and the point of use. Pressure gauge connection: GW 1/8" BSP. Output pressure range: 0 ÷ 2 bar, 0 ÷ 4 bar, 0 ÷ 8 bar, or 0 ÷ 12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal dividing valve with mechanical control, spring rod assistance, commonly used for controlling actuator operation. Can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLogical element NOT-negation. Control by compressed air, reset by mechanical spring. Mounting in any position. Material: body - plastic, spindle - aluminum, sealing - NBR. Nominal flow: 100 Nl/min at 6 bar with a pressure drop of 1 bar. Built-in plug couplings for 4 mm tubing. Operating temperature: from -10°C to +60°C. Working pressure: 0 to 8 bar. Control pressure: 1.5 to 8 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsREG pressure reducing valve, SKILLAIR® series, without end plates, is used to regulate working pressure, ensuring proper operation of the device. Size: 100, 200, 300. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar - series 300). Operating temperature: up to +50°C. Connection: BSP female thread 1/4" ÷ 1". Pressure gauge connection: BSP female thread 1/8". Flow rate: 1600 l/min - size 100, 3500 l/min - size 200, 7000 l/min - size 300 (at input pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable long "T" plug connector with external thread, type R37, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug intended for flexible pneumatic hoses in inch dimensions, series S, type PPFC. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe VOR series higher signal valve is designed to separate the higher value signal from two input signals. The input signals do not interact with each other. Operating pressure: 2 ÷ 10 bar. Operating temperature: from -10°C to +80°C. Body material: aluminum. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFR + L series BIT set with shaped membrane. It is characterized by high flow value with reduced pressure drop, high degree of condensate separation, and the ability to operate at low flow rates. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLubricator series SYNTESI®, without end connections, ensures proper lubrication of devices in pneumatic installations with oil mist. Standard version (STD), oil filling through the oil refill plug. Size: SY1, SY2. Tank capacity: 60 cm³ - SY1, 130 cm³ - SY2. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: from -10°C to +50°C. Connection: BSP 1/8" to 3/8" for SY1 and BSP 3/8" to 1" for SY2. Flow rate: 1600 l/min - 1/8", 3000 l/min - 1/4", 3650 l/min - 3/8", 6100 l/min - 1/2", 3/4", 1" (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSimple foot valve with protective cover and front plane sockets, used for foot control by the operator of devices in pneumatic systems. Connection: M5, Ø4. Working pressure: from 2.5 bar to 10 bar. Operating temperature: -10°C to +60°C. Nominal flow: 95 l/min (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLogical element MEMORY-memory. Control by compressed air, reset by compressed air. Mounting in any position. Material: body - plastic, spindle - aluminum, sealing - NBR. Nominal flow: 100 Nl/min at 6 bar with a pressure drop of 1 bar. Built-in plug couplings for 4 mm tubing. Operating temperature: from -10°C to +60°C. Working pressure: 0 to 8 bar. Control pressure: 1.5 to 8 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsREG pressure reducing valve, SKILLAIR® series, with end plates, is used to regulate working pressure, ensuring proper operation of the device. Size: 100, 200, 300. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar - size 300). Operating temperature: up to +50°C. Connection: BSP 1/4" to 1". Pressure gauge connection: BSP 1/8". Flow rate: 1600 l/min - size 100, 3500 l/min - size 200, 7000 l/min - size 300 (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, lever with roller, commonly used for controlling actuator operation. Can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVFR + L series NEW DEAL set with a high degree of reliability featuring a piston-type pressure reducing valve, consists of a shut-off valve, air filter, pressure reducing valve, and lubricator. It is designed for operation in harsh conditions, ensuring stability of the set pressure with variable supply pressure and functioning at low flow rates. The V3V valve allows for quick aeration and venting of the system. Connection: BSP thread 1/4", 3/8", 1/2", 3/4", 1". Supply pressure: up to 18 bar, for discharge RA up to 10 bar. Output pressure range: 0÷8, 0÷12 bar. Filtration degree: 4 µm, 20 µm, 50 µm. Condensate discharge: manual / semi-automatic (RMSA), automatic (SAC, RA). Pressure gauge connection: BSP thread 1/8". Operating temperature: up to +50°C. Nominal flow: 480 l/min - 1/4", 1900 l/min - 3/8", 1/2" (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe GAF filter series GA with BSP internal thread is used for removing contaminants contained in compressed air to ensure the proper operation of pneumatic system components. The package includes a mounting bracket. GA connection sets (L, T, U shapes) are used for connecting individual components. Size: 200, 300, 400, 600. Filtration degree: 40 µm. Supply pressure: up to 10 bar. Operating temperature: from -5°C to +70°C. Connection: BSP 1/8" to 1". Condensate drain: automatic (A). Flow rate: 1700 l/min - size 200, 3000 l/min - size 300, 4500 l/min - size 400, 10500 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPneumatically adjustable NAMUR valve, used for controlling pneumatic actuators. Its connection allows for direct mounting of valves on the actuator body. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - Hostaform®. Minimum pilot supply pressure: 2.5 bar. Operating temperature: -10°C to +60°C. Nominal flow: 1100 l/min (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with pressure regulator (filter regulator) FR, SKILLAIR® series, is a device consisting of a filter and a pressure reducing valve. It reduces and purifies the air supplied by the compressor. Size: 100, 200. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar, depending on the size. Operating temperature: up to +50°C. Connection: BSP 1/4" to 1/2". Pressure gauge connection: BSP 1/8". Condensate drain: manual / semi-automatic (RMSA), automatic (RA, SAC). Flow rate: up to 3000 l/min at an inlet pressure of 6 bar (Δp = 1 bar), depending on the size.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLogical element YES-confirmation. Control by compressed air, reset by mechanical spring. Mounting in any position. Material: body - plastic, spindle - aluminum, sealing - NBR. Nominal flow: 100 Nl/min at 6 bar with a pressure drop of 1 bar. Built-in plug couplings for 4 mm tubing. Operating temperature: from -10°C to +60°C. Working pressure: 0 to 8 bar. Control pressure: 1.5 to 8 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSKILLAIR® D series filter, without end plates, is used for the precise removal of liquid and solid contaminants contained in compressed air. Size: 100, 200, 300. Filtration degree: 99.97% at 0.01 µm. Supply pressure: up to 15 bar, depending on size and type of drain. Operating temperature: up to +50°C. Condensate drain: manual/semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 230 l/min - size 100, 360 l/min - size 200, 500 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMRF NTB type throttling valve series COMPACT "N" used for simultaneous flow regulation in both directions - during filling and venting, applied in pneumatic systems for regulating the flow rate of compressed air and flow direction. Equipped with a plug connection for easy disassembly of pneumatic hoses. Adjustment change via a control knob and/or screwdriver; possibility of securing the setting with a locking nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +50°C. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAC series SYNTESI® activated carbon filter, without end connections, is used for purifying compressed air from oil residues, solvents, and odors. Purification occurs as air flows through the porous granulate of activated carbon with high pollutant absorption. This is the most effective air purification method used in industrial pneumatic installations. The efficiency and lifespan of the filter element can be increased by preceding it with a fine filter (0.01µm) and a pre-filter (5µm). Size: SY1, SY2. Oil residue at 20°C: 0.003 mg/m³ – air purity class according to ISO 8573-1: 1-7-1 (with a pressure drop not exceeding 75 mbar). Filter element lifespan: 4000 hours (with a pressure drop not exceeding 75 mbar). Supply pressure: up to 15 bar - size SY1, up to 13 bar - size SY2. Operating temperature: from -10°C to +50°C. Condensate drain: manual / semi-automatic (RMSA). Recommended flow: 350 l/min - size SY1, 800 l/min - size SY2 (at a pressure of 6.3 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF OMV series COMPACT "O" for installation in the connections of distribution valves, used in pneumatic systems to regulate the flow rate of compressed air and the direction of flow. Equipped with a plug connection for easy disassembly of pneumatic hoses. Adjustment change using a screwdriver, with the possibility of mounting a protective cover. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Material: nickel-plated brass.
