Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SKILLAIR® series lubricator, without end plates, ensures proper lubrication of devices in pneumatic installations with an oil mist. Size: 100, 200, 300. Tank capacity: 50 cm³ - size 100, 95 cm³ - size 200, 160 cm³ - size 300. Supply pressure: up to 15 bar (13 bar - size 200, 300). Operating temperature: up to +50°C. Connection: BSP 1/4" to 1". Flow rate: 1500 l/min - size 100, 3700 l/min - size 200, 5500 l/min - size 300 (at an inlet pressure of 6 bar and Δp = 1 bar). Oil filling methods: STD - standard version, filling through tank disassembly or plug, CA - automatic filling, replenishment only during the lubricator's operation, CD - vacuum filling, pressure drop inside the tank allows for filling, CAML - automatic filling with a minimum level, CDML - vacuum filling with a minimum level.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOP shut-off valve series STP-BX with internal thread and plug connection used mainly as a safety valve. When installed on the actuator's supply connection, it allows airflow only in the presence of a pneumatic control signal. The actuator is stopped after a drop in control pressure. Operating pressure: 0.5 ÷ 10 bar. Operating temperature: from -10°C to +60°C. Body material: nickel-plated brass. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElectric shut-off valve V3V, SKILLAIR® series, without end plates, is used to separate the working system from the supply air. It is a normally closed, three-way valve. In the closed position, it cuts off the supply air while simultaneously venting the system, making it particularly useful during maintenance work. Size: 100. Supply pressure: up to 10 bar. Operating temperature: up to +50°C. Flow rate: 1650 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsManual shut-off valve V3V series SYNTESI®, with end connections, is used to separate the working system from the supply air. It is a three-way, two-position, normally closed valve. In the closed position, it cuts off the supply air and vents the system, making it particularly useful for maintenance work. It has a system allowing for the installation of two padlocks of size SY1 or three padlocks of size SY2 with a diameter of 3 mm. Alternatively, a version with a Ø 7 hole for a single padlock is available. On the rear and front surfaces of the valve, there are auxiliary connections (1/8” for size SY1 and 1/4” for size SY2) for connecting a pressure gauge, pressure sensor, or for additional air intake. Size: SY1, SY2. Connection: BSP thread 1/8", 1/4", at the front and rear. Supply pressure: up to 15 bar, depending on the size. Operating temperature: from -10°C to +50°C. Nominal flow: up to 4000 l/min, depending on the size (at an inlet pressure of 6 bar and Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe GZ V3V series G shut-off valve with BSP internal thread is used to separate the supply air from the working part of the installation. When closed, the air behind the valve is released into the atmosphere. Particularly recommended as a safety measure during maintenance work. The package includes a mounting bracket/holder, a padlock, and 2 keys. Connection sets GA (L, T, U shapes) are used to connect individual components together. Size: 200, 300, 400. Connection: BSP 1/8" ÷ 1/2". Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Control: manual.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMR FC series BIT regulator. Version with controlled bleed, allows for increased accuracy in maintaining the set output pressure value through continuous, slight venting of air to the atmosphere. Pressure gauge connection: GW 1/8" BSP. Output pressure range: 0 ÷ 2 bar, 0 ÷ 4 bar, or 0 ÷ 12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLubricator series SKILLAIR®, with end plates, ensures proper lubrication of devices in pneumatic installations with oil mist. Size: 100, 200, 300. Tank capacity: 50 cm³ - size 100, 95 cm³ - size 200, 160 cm³ - size 300. Supply pressure: up to 15 bar (13 bar - size 200, 300). Operating temperature: up to +50°C. Connection: BSP 1/4" to 1". Flow rate: 1500 l/min - size 100, 3700 l/min - size 200, 5500 l/min - size 300 (at inlet pressure 6 bar and Δp = 1 bar). Oil filling method: STD - standard version, filling through tank disassembly or plug, CA - automatic filling, replenishment only during lubricator operation, CD - vacuum filling, pressure drop inside the tank allows for filling, CAML - automatic filling with minimum level, CDML - vacuum filling with minimum level.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe pilot-operated pressure reducing valve REG P, SKILLAIR® series, is used to maintain air pressure wherever high accuracy of setting is required under varying working conditions. The valve has practically eliminated friction, which results in the aforementioned high accuracy and low hysteresis. The presence of a slight air bleed is necessary for the proper operation of the valve and is not a sign of damage. Typical for large-sized pressure reducing valves (series 400). It is recommended to use filtered air. Size: 1/4". Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Connection: BSP female thread 1/4". Pressure gauge connection: BSP female thread 1/8". Flow rate: 140 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FIL filter series SKILLAIR®, without end plates, is used for the precise removal of liquid and solid contaminants contained in compressed air. The size of the retained contaminants depends on the filtration degree of the filter element. Size: 100, 200, 300. Filtration degree: 5 µm, 20 µm, 50 µm. Supply pressure: up to 15 bar, depending on size and type of drain. Operating temperature: up to +50°C. Connection: BSP 1/4" to 1". Condensate drain: manual/semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 2000 l/min - size 100, 3100 l/min - size 200, 5300 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FIL filter series SKILLAIR®, with end plates, is used for the precise removal of liquid and solid contaminants contained in compressed air. The size of the retained contaminants depends on the filtration degree of the filter element. Size: 100, 200, 300. Filtration degree: 5 µm, 20 µm, 50 µm. Supply pressure: up to 15 bar, depending on size and type of discharge. Operating temperature: up to +50°C. Connection: GW BSP 1/4" to 1". Condensate discharge: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 2000 l/min - size 100, 3100 l/min - size 200, 5300 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGR series G reducer with internal BSP thread, manually adjustable, maintains a constant output pressure regardless of fluctuations in pressure before the valve. The package includes a mounting bracket and a pressure gauge. Connection sets GA (L, T, U shapes) are used for connecting individual components. Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: BSP 1/8" to 1". Flow rate: 3000 l/min - size 200, 4000 l/min - size 300, 7500 l/min - size 400, 12000 l/min - size 600 (at input pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGF series G filter with BSP internal thread is used for removing contaminants contained in compressed air to ensure the proper operation of pneumatic system components. The package includes a mounting bracket. GA connection sets (L, T, U shapes) are used for connecting individual components. Size: 200, 300, 400, 600. Filtration degree: 40 µm. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: BSP 1/8" to 1". Condensate drain: automatic (A). Flow rate: 3100 l/min - size 200, 5000 l/min - size 300, 7500 l/min - size 400, 12000 l/min - size 600 (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGL series G lubricator with internal BSP thread ensures proper lubrication of devices with oil mist in pneumatic installations. The package includes a mounting bracket/holder. Connection sets GA (L, T, U shapes) are used for connecting individual components. Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: BSP 1/8" ÷ 1". Flow rate: 3200 l/min - size 200, 5400 l/min - size 300, 8300 l/min - size 400, 12000 l/min - size 600 (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic condensate discharge (SAC, RA) intended for BIT, NEW DEAL, SKILLAR systems.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsType C11 four-way connector designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter - GFR series G pressure regulator with internal BSP thread is used to remove contaminants contained in compressed air for the proper operation of pneumatic system components, and the manually adjustable regulator maintains a constant pressure value at the outlet, regardless of pressure fluctuations before the valve. The set includes a mounting bracket/holder and a pressure gauge. Connection sets GA (L, T, U shapes) are used to connect individual components together. Size: 200, 300, 400, 600. Filtration degree: 40 µm. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: BSP 1/8" to 1". Condensate drain: automatic (A). Flow rate: 2100 l/min - size 200, 3800 l/min - size 300, 6750 l/min - size 400, 11100 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSKILLAIR® D series filter, with end plates, is used for the precise removal of liquid and solid contaminants contained in compressed air. Size: 100, 200, 300. Filtration degree: 99.97% at 0.01 µm. Supply pressure: up to 15 bar, depending on size and type of discharge. Operating temperature: up to +50°C. Connection: BSP 1/4" to 1". Condensate discharge: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 230 l/min - size 100, 360 l/min - size 200, 500 l/min - size 300 (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsD series NEW DEAL fine filter with coalescing element removing oil vapors. Filtration efficiency: 99.97% at 0.01 µm. Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 230 l/min (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDEP BIT series fine filter with coalescing element for compressed air systems or in close proximity to actuating devices. Size: 1/8", 1/4". Maximum inlet pressure: up to 13 bar. Operating temperature: up to +50°C. Condensate drain: manual / semi-automatic (RMSA). Recommended flow: 200 Nl/min (at inlet pressure of 6 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe precise filter DEP series SYNTESI®, with end connections, is used to remove liquid or solid contaminants from compressed air with high accuracy. High filtration accuracy is achieved by using a special filtering element called a "coalescing cartridge." Size: SY1, SY2. Filtration degree: 0.01 µm - air purity class according to ISO 8573-1: 1-7-2. Supply pressure: up to 15 bar - size SY1, up to 13 bar - size SY2. Operating temperature: from -10°C to +50°C. Condensate drain: manual / semi-automatic (RMSA). Recommended flow: 460 l/min - size SY1, 620 l/min - size SY2 (at a pressure of 6.3 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe angle bracket is intended for mounting to the plate of products from the Line On Line series. Supplied with two M3x16 screws (for LOL 4), two M3x25 screws (for LOL 6 and 8), two M3 nuts, and four washers. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLock preventing unauthorized adjustment of the pressure reducing valve settings or activation of the shut-off valve - for the Syntesi® series.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsKey for disassembling the BIT/SY1 tank, SYNTESI system. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow made of stainless steel type 62510 with internal BSP thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight coupling for joining plastic hoses (for polyurethane hoses, a minimum hardness according to Shore (A) 98° is required). Material: nickel-plated brass. Operating temperature: from -15°C to +130°C. Working pressure: 30 bar. Sealing: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting flange for pneumatic actuator, for attachment to the rear or front cover of the actuator. Allows for permanent mounting of the actuator in machines and devices. Range of actuator diameters: 32 mm ÷ 125 mm. Included: 4 mounting screws. Material: galvanized carbon steel (flange, screws, and washers).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting collar for pneumatic actuator, for attachment to the rear or front cover of the actuator. Allows for permanent mounting of the actuator in machines and devices. Actuator size: Ø8 ÷ Ø25. Material: galvanized carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete BANJO plug tee, type R55, designed for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd fitting with external BSPT thread and ribbed "tail" for hose, type 62340. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHex socket plug with hex key for stainless steel type 62315 with external BSP or metric thread, O-ring. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBanjo tee body connector with D6 type socket connections, designed for hoses made of soft plastics. The connection is made by fitting the hose onto the end and tightening with a nut. The Banjo tee body connector allows for positioning the connector in the desired orientation. Through bolts for the body: D7, D8, D9, D10. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBanjo tee body, type R14, for screws of series D, intended for connecting pipes and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBanjo tee body, type R29, for screws series D, intended for connecting pipes and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsU connector designed for connecting Line On Line products. For 6 mm and 8 mm connectors. Material: polyamide.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAC mounting bracket for cylindrical actuator - RNDC series. Packaged individually. Actuator sizes: Ø32, Ø40, Ø50. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDistribution rail with two opposing outlets for use in pneumatic systems, allowing for the separation of compressed air under pressure into several other branches. It has additional holes for securing it in the desired location of the installation. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: anodized aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini actuators of the TP series, manufactured according to ISO 6432 standards, have covers made of high-strength plastic, while the cylinders are made of anodized aluminum. Available versions: with magnet or without magnet. Piston diameter: Ø 16, 20, and 25 mm. Working stroke: from 1 to 80 mm (with the possibility of ordering up to 500 mm). Working pressure: from 0.6 to 10 bar. Sealing: polyurethane. Operating temperature: from -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini double-acting cylinder ISO 6432 STD, type 109 with cushioning, without magnet. It is designed to operate with filtered oil-lubricated or non-oil-lubricated air and does not require additional maintenance. The cylinder is made with a stainless steel sleeve. The dimensions of the outer covers for certain diameters have been reduced, allowing for installation in confined and restricted spaces. The lifespan of cylinders with NBR seals is 15 million cycles, with polyurethane seals 30 million cycles. The presented values should not be considered binding or guaranteed, but only as a reference due to the variability of many factors, including radial and axial loads, speed, temperature, or air losses (limit values). Piston diameter: Ø 16, 20, and 25 mm. Stroke: from 10 to 320 mm. Operating pressure: from 0.6 to 10 bar. Sealing: polyurethane, NBR, FKM/FPM. Operating temperature: from -10°C to +150°C depending on the seal used.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature RML type pressure reducing valve (threaded connection with O-ring at the inlet and plug connection at the outlet) designed to reduce higher pressure to lower pressure downstream of the valve. Output pressure range: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature RML type pressure reducing valve (plug-in connection at the inlet and threaded connection with an O-ring at the outlet) designed to reduce higher pressure to lower pressure downstream of the valve. Output pressure range: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
