Is End 45Â° with GW UNF SAE, steel, type 52702 compatible with 3055 type air conditioning hose and what torque is required for proper sealing?

Yes. End 45Â° with GW UNF SAE, steel, type 52702 is compatible with 3055 type air conditioning hose . the product description explicitly states it is a 45Â° end with internal UNF SAE thread, 45Â° cone, for 3055 type air conditioning hose, made of steel. Torque for proper sealing: follow the SAE/UNF fitting guidelines for 45Â° cone (flareless) fittings. Typical torque range for steel UNF SAE cone fittings on 3055-type hoses is approximately 25â35 Nm (18â26 lbÂ·ft) for small sizes (e.g., 1/4"â3/8") and 40â60 Nm (30â44 lbÂ·ft) for larger sizes (e.g., 1/2"). Exact torque depends on thread size, fitting diameter, and assembly conditions; use the hose/fitting manufacturerâs torque chart when available. If no chart is provided, start at the lower end of the range and tighten to achieve leak-free seal without deforming the hose or fitting, then verify under system pressure.

Does End 45Â° with GW UNF SAE, steel, type 52702 fit 3055 type air conditioning hose and require any adapter?

Yes. End 45Â° with GW UNF SAE, steel, type 52702 is designed for 3055 type air conditioning hose (itâs described specifically for 3055). It has an internal UNF SAE thread with a 45Â° cone, so it mates directly with the corresponding 3055 hose fitting and does not require an additional adapter if your mating component has the matching UNF SAE male thread and 45Â° cone sealing surface. Ensure thread size and cone angle match your system to avoid leaks.

Can End 45Â° with GW UNF SAE, steel, type 52702 withstand standard A/C system pressures when used with 3055 hose?

Yes. End 45Â° with GW UNF SAE, steel, type 52702 is designed for use with 3055 type air conditioning hose (45Â° end with internal UNF SAE thread and 45Â° cone) and, when properly assembled with the correct 3055 hose and fittings, will withstand standard automotive A/C system pressures. Steel construction and the SAE UNF cone design provide the mechanical strength and sealing required for typical refrigerant operating pressures used in vehicle A/C systems. Proper installation, correct torque on the UNF connection, use of compatible O-rings or sealing methods where specified, and adherence to hose and fitting manufacturer pressure ratings are necessary to ensure safe, leak-free performance under standard A/C service conditions.

End 45° with GW UNF SAE, steel, type 52702

Additional information

Material	CS – steel (cast iron)

45° end with internal UNF SAE thread, 45° cone, for 3055 type air conditioning hose. Material: steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
BU-52702-04-06-S	End. 45° G 7/16" SAE, 45° cone, hose 5/16", steel	-	35	In stock	Enquiry
BU-52702-06-06-S	End. 45° G 5/8" SAE, 45° cone, hose 5/16", steel	-	35	In stock	Enquiry
BU-52702-06-08-S	End. 45° G 5/8" SAE, 45° cone, hose 13/32", steel	-	35	In stock	Enquiry
BU-52702-08-06-S	End. 45° GW 3/4" SAE, 45° cone, hose 5/16", steel	-	35	In stock	Enquiry
BU-52702-08-08-S	End. 45° G 3/4" SAE, 45° cone, hose 13/32", steel	-	35	In stock	Enquiry
BU-52702-08-10-S	End. 45° G 3/4" SAE, 45° cone, hose 1/2", steel	-	35	In stock	Enquiry
BU-52702-10-08-S	End. 45° G 7/8" SAE, 45° cone, hose 13/32", steel	-	35	In stock	Enquiry
BU-52702-10-10-S	End. 45° G 7/8" SAE, 45° cone, hose 1/2", steel	-	35	In stock	Enquiry
BU-52702-10-12-S	End. 45° G 7/8" SAE, 45° cone, hose 5/8", steel	-	35	In stock	Enquiry
BU-52702-12-12-S	End. 45° G 1.1/16" SAE, 45° cone, hose 5/8", steel	-	35	In stock	Enquiry