Is the 90Â° UNF GZ end with socket, steel, type 52208 compatible with 3055 type air conditioning hose and standard UNF fittings?

Yes. The 90Â° UNF GZ end with socket, steel, type 52208 is described as a 90Â° end fitting with external UNF thread and socket, specifically for 3055 type air conditioning hose, made of steel. That description indicates compatibility with 3055 type hose and with standard fittings that accept external UNF (Unified National Fine) male threads. Ensure the mating part uses the matching UNF thread size and pitch specified for type 52208 and that hose assembly procedures (insertion depth, ferrule/clip or crimping requirement) follow the 3055 hose manufacturerâs instructions. If the system uses a non-standard UNF size or requires a different sealing method (O-ring, cone seat, etc.), verify thread form and sealing face before assembly.

Can the 90Â° UNF GZ end with socket, steel, type 52208 be used with 3055 air conditioning hose under high-pressure conditions?

Yes - the 90Â° UNF GZ end with socket, steel, type 52208 is designed for use with 3055 type air conditioning hose and, being steel with an external UNF thread and socket, is suitable for high-pressure HVAC applications when used with the correct 3055 hose assembly, proper crimping/installation tools, and within the rated pressure/temp limits of both the fitting and hose. Ensure compatibility by verifying the specific pressure ratings, temperature range, and crimp specifications from the hose and fitting manufacturers; improper assembly or exceeding rated limits can cause failure.

Does the 90Â° UNF GZ end with socket, steel, type 52208 require any specific assembly tools for 3055 hose?

Based on the description of 90Â° UNF GZ end with socket, steel, type 52208. a 90Â° end fitting with external UNF thread and socket, for 3055 type air conditioning hose, material: steel. assembly typically requires standard hydraulic hose assembly tools. For 3055 hose and this fitting you will need: - A hose cutting tool (fine-toothed rotary cutter or hose saw) to produce a clean, square cut on the 3055 hose. - A deburring tool to remove any burrs from the cut end. - A proper-sized socket/crimping tool or hydraulic crimper matched to the socket dimensions of type 52208 (manufacturerâs recommended die set) to securely crimp the socket onto the hose. The socket design implies a crimp/swage assembly rather than thread-on. - A torque wrench or spanner to tighten the external UNF thread into its mating port to the manufacturerâs specified torque. - Lubricant and hose assembly fixtures/vises to hold components straight during crimping. Always follow the hose and fitting manufacturerâs specific assembly instructions (crimp diameter, crimp pattern, torque values and recommended crimper dies). Using the correct crimper and dies is essential for a reliable, leak-free joint; ad-hoc tools or incorrect dies can cause failures.

90° UNF GZ end with socket, steel, type 52208

Additional information

Material	CS – steel (cast iron)

90° end fitting with external UNF thread and socket, for 3055 type air conditioning hose. Material: steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
BU-52208-06-06-S	End. 90° GZ 5/8" with socket, hose 5/16", steel	-	35	In stock	Enquiry
BU-52208-08-08-S	End. 90° GZ 3/4" with socket, hose 13/32", steel	-	35	In stock	Enquiry
BU-52208-10-10-S	End 90° GZ 7/8" with socket, hose 1/2", steel	-	35	In stock	Enquiry
BU-52208-10-12-S	End. 90° GZ 7/8" with socket, hose 5/8", steel	-	35	In stock	Enquiry
BU-52208-12-12-S	End. 90° GZ 1.1/16" with socket, hose 5/8", steel	-	35	In stock	Enquiry