Is the 90Â° tube end without nut, steel, type 52726 compatible with air conditioning hose type 3055 and standard clamps?

Yes. The 90Â° tube end without nut, steel, type 52726 is designed for use with air conditioning hose type 3055. Made of steel and intended as a tube fitting without a nut, it matches the hose type specification. Standard clamps can be used to secure the hose to this fitting provided the clamp size and type are appropriate for the hose outer diameter and the fittingâs smooth tube end. Ensure you select clamps rated for air-conditioning applications (temperature, pressure, corrosion resistance) and sized correctly to achieve a proper seal.

Does the 90Â° tube end without nut, steel, type 52726 require specific hose sizes or adapters for AC hose type 3055?

The 90Â° tube end without nut, steel, type 52726 is designed specifically for air conditioning hose type 3055. Because it is a tube end without a nut, correct hose connection requires that the hose 3055 either has a compatible crimp sleeve/ferrule and matching fitting geometry or that you use an adapter that provides a nuted connection compatible with the 3055 hose. In practice: verify the hoseâs outer diameter and end preparation (crimp/profile) match the 52726 tube spigot; if they do not, use an adapter or a matching ferrule/crimp assembly sized for hose 3055. Always confirm material compatibility (steel) and pressure rating when selecting adapters or crimp components.

Can the 90Â° tube end without nut, steel, type 52726 withstand typical AC refrigerant pressures for hose type 3055?

Probably not safe to assume. you need the explicit working pressure rating. Explanation: The product name "90Â° tube end without nut, steel, type 52726" indicates geometry and material (steel) and that it is intended for air conditioning hose type 3055, but the name alone does not provide the required working (operating) pressure, burst pressure, or applicable standards (e.g., SAE J2064, EN 853/857, or manufacturer-specific specs). Typical AC refrigerant systems (R134a, R1234yf, R410A) operate at a wide range of pressures depending on refrigerant and operating conditions. low-side pressures are low, but high-side pressures can reach 20â40 bar (300â600 psi) or higher for some systems. Hose type 3055 and its fittings must be rated to the systemâs maximum working pressure plus appropriate safety margin. To determine if the "90Â° tube end without nut, steel, type 52726" can withstand typical AC refrigerant pressures for hose type 3055 you need: - The fittingâs specified maximum working pressure and burst pressure from the manufacturer/datasheet. - Confirmation the fitting is compatible with hose type 3055 and installed per manufacturer instructions (crimping/assembly method). - Compliance with relevant standards and testing for refrigerant service and temperature range. Without those documented ratings, do not assume adequacy based solely on material and part name. If you can provide the manufacturer datasheet or rated pressure values for type 52726, I can confirm suitability against typical AC refrigerant pressures.

A fitting 90° tubular without a nut, steel, type 52726

Additional information

Material	CS – steel (cast iron)

A fitting 90° tubular without a nut for hose for air conditioning type 3055. Material: steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
BU-52726-06-06-S	Fitting 90° tube without nuts, hose 5/16", steel	-	35	In stock	Enquiry
BU-52726-08-08-S	Fitting 90° tube without nuts, hose 13/32", steel	-	35	In stock	Enquiry
BU-52726-10-10-S	Fitting 90° tube without nuts, hose 1/2", steel	-	35	In stock	Enquiry
BU-52726-10-12-S	Fitting 90° tube without nuts, hose 5/8", steel	-	35	In stock	Enquiry
BU-52726-12-10-S	Fitting 90° tube without nuts, hose 1/2", steel	-	35	In stock	Enquiry
BU-52726-12-12-S	Fitting 90° tube without nuts, hose 5/8", steel	-	35	In stock	Enquiry