Is the 90Â° tube end with GW UNF, compact, steel, type 52740 compatible with air conditioning hose type 3055 and rated for refrigerant use?

Yes. The 90Â° tube end with GW UNF, compact, steel, type 52740 is described specifically as a 90Â° tube fitting with internal UNF thread, compact version, for hose for air conditioning type 3055, made of steel. That description indicates compatibility with air conditioning hose type 3055 and implies it is intended for HVAC applications. Because it is made of steel and specified for hose type 3055 (an AC hose), it is suitable for refrigerant service when used within the hoseâs and fittingâs rated pressure, temperature, and refrigerant compatibility limits. Before installation confirm: - Thread and dimensional match between the fitting and hose assembly. - Pressure and temperature ratings meet system requirements. - Sealing method (Oâring, crush sleeve, etc.) is correct for refrigerant used. - Manufacturerâs datasheet or certification explicitly lists refrigerant compatibility and allowable operating conditions.

Can the 90Â° tube end with GW UNF, compact, steel, type 52740 be used with air conditioning hose type 3055 for refrigerant service?

Yes. The 90Â° tube end with GW UNF, compact, steel, type 52740 is described as a 90Â° tube fitting with internal UNF thread, compact version, for hose for air conditioning type 3055, material steel. That description indicates it is designed to be used with air conditioning hose type 3055 and therefore is suitable for refrigerant service when paired with that hose. Ensure compatibility of thread size, torque and sealing method, and verify pressure and refrigerant compatibility per system specifications and applicable standards before installation.

Does the 90Â° tube end with GW UNF, compact, steel, type 52740 meet OEM pressure specs for AC hose type 3055?

Based on the provided description, the 90Â° tube end with GW UNF, compact, steel, type 52740 (90Â° tube fitting with internal UNF thread, compact version, for hose for air conditioning type 3055. Material: steel) appears mechanically compatible with AC hose type 3055: it is explicitly specified for that hose type and uses an internal UNF (GW UNF) connection which matches typical fittings for type 3055. However, the description does not state any pressure ratings or OEM-specified pressure specifications. Therefore you cannot confirm compliance with OEM pressure specs solely from this description. To determine whether type 52740 meets OEM pressure requirements for hose type 3055 you must obtain and verify the following from the manufacturer or technical datasheet: - Rated working pressure and maximum burst pressure for type 52740 - OEM required working and test pressures for hose type 3055 - Material and construction compliance (steel grade, surface treatment) and any applicable standards (SAE, ISO) - Thread and sealing compatibility details and assembly torque/installation instructions If the 52740âs rated working pressure equals or exceeds the OEM working pressure (with adequate safety margin and matching test/burst ratings and standards), then it meets OEM pressure specs; without those documented values, compliance cannot be confirmed.

90° tube end with GW UNF, compact, steel, type 52740

Additional information

Material	CS – steel (cast iron)

90° tube fitting with internal UNF thread, compact version, for hose for air conditioning type 3055. Material: steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
BU-52740-06-06-S	End. 90° compact pipe fitting GW 5/8", hose 5/16", steel	-	35	In stock	Enquiry
BU-52740-08-08-S	End. 90° compact pipe GW 3/4", hose 13/32" steel	-	35	In stock	Enquiry
BU-52740-10-10-S	End. 90° compact pipe GW 7/8", hose 1/2", steel	-	35	In stock	Enquiry
BU-52740-12-12-S	End. 90° compact pipe GW 1.1/16", hose 5/8", steel	-	35	In stock	Enquiry