Can the Adapter for steam hose end with GW, brass, GFB, BOSS type withstand 18 bar pressure at +210Â°C saturated steam without leakage when tightened with the wing nut?

Adapter for steam hose end with GW, brass, GFB, BOSS type, made of brass, is specified with working pressure 18 bar at +210Â°C (saturated steam) and operating temperature up to +230Â°C. Its design.conical surface mating a spherical sealing face and tightened with a wing nut.creates a steam- and high-temperature-resistant sealed connection intended to be tightened/loosened without tools. Given the provided specification, when properly assembled (correct mating spherical end, correct GFB internal thread engagement, clean sealing surfaces, and the wing nut tightened to normal assembly torque appropriate for this type of joint), the adapter is rated to withstand 18 bar at +210Â°C saturated steam without leakage. Note that long-term leak-free service also depends on correct component compatibility, condition of seals/surfaces, proper tightening, and avoidance of mechanical damage or corrosion; deviations from specified use, improper assembly, or damaged parts can cause leakage despite the rating.

Does the Adapter for steam hose end with GW, brass, GFB, BOSS type remain steam-tight at 18 bar and +210Â°C when secured with the wing nut?

Adapter for steam hose end with GW, brass, GFB, BOSS type remains steam-tight at 18 bar and +210Â°C when secured with the wing nut, provided it is used as intended: the brass GFB adapter mates its conical surface to the spherical sealing surface of the end and is tightened by the wing nut, creating a tight connection resistant to steam and high temperature. The product specification lists working pressure 18 bar (+210Â°C) for saturated steam and operating temperature up to +230Â°C, confirming suitability. Ensure correct matching of threads, proper assembly and component condition to maintain the seal.

Is the Adapter for steam hose end with GW, brass, GFB, BOSS type compatible with different thread sizes of wing nuts?

Adapter for steam hose end with GW, brass, GFB, BOSS type is compatible with different thread sizes of wing nuts? Yes, but with limitations. The wing nut thread of this Adapter for steam hose end with GW, brass, GFB, BOSS type is deliberately larger than the internal thread of the GFB adapter. The design uses a conical surface mating with the spherical sealing face and is tightened by a wing nut; the wing nutâs thread size must match the external thread provided for it. You cannot screw a wing nut with a different (nonâmatching) thread pitch or diameter onto that specific external thread. However, because the adapter is intended to be part of a modular steam end assembly, you can create various connections by using other components (adapters, collars or bespoke wing nuts) that are made to mate with the adapterâs threading. In short: a wing nut must match the adapterâs external thread to function. Crossâmatching different standard wing nut thread sizes is not compatible unless an intermediary component with the correct mating threads is used.

Adapter for fittings for hose for steam water with female thread, brass, GFB, type BOSS

All products, Steam hoses/

Additional information

Material	B – brass (bronze)

An adapter for a ball end and a wing nut. has tapered surface, cooperating with ball surface sealing fittings. It is tightened to the ball end by means of a wing nut. This creates a tight connection resistant to steam and high temperature, which is at the same time easy to unscrew and screw on without using tools. thread a nut wing has different (greater) size than thread internal adapter GFB. Adapter GFB constitutes typical part complete fittings for steam with a thread internal. use adapter allows creating various connections, depending on element used in installations. Material: brass. pressure working: 18 bar (+210°C) – steam saturated. temperature use: up to +230°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
DX-GFB-12-B-NPT	Adapter GFB, 3/4" NPT female, brass	-	18	In stock	0 zł		Enquiry
DX-GFB-16-B-NPT	Adapter GFB, 1" NPT female, brass	-	18	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

An adapter for a ball end and a wing nut. has tapered surface, cooperating with ball surface sealing fittings. It is tightened to the ball end by means of a wing nut. This creates a tight connection resistant to steam and high temperature, which is at the same time easy to unscrew and screw on without using tools. thread a nut wing has different (greater) size than thread internal adapter GFB. Adapter GFB constitutes typical part complete fittings for steam with a thread internal. use adapter allows creating various connections, depending on element used in installations. Material: brass. pressure working: 18 bar (+210°C) – steam saturated. temperature use: up to +230°C.