Is the ADVANSTAR CWP multi-pass hydraulic hose - 350 BAR compatible with standard hydraulic fittings and flanges used in large construction machinery?

Yes. The ADVANSTAR CWP multi-pass hydraulic hose - 350 BAR is compatible with standard hydraulic fittings and flanges used in large construction machinery. Reasoning: - It is designed for hydraulic power systems of large construction machinery and hydraulic-driven equipment, so its construction and dimensions target those applications. - Rated working pressure 350 bar and built to ISO 18752 CLASS 350 CC, which aligns with common industrial hydraulic fitting pressure classes. - Construction (inner synthetic rubber, four layers of spiral steel wire reinforcement, outer rubber) matches the expectations for hoses that use standard crimped, swaged, or flange-type fittings. - Operating temperature range (-40Â°C to +120Â°C) and MSHA flame-resistant outer layer meet typical environmental and safety requirements for heavy machinery installations. Note: Confirm compatibility by matching hose nominal diameter and end-termination specification to the exact fitting/flange standard (thread type, bore size, crimp profile or flange type) used on your equipment.

How does ADVANSTAR CWP multi-pass hydraulic hose - 350 BAR perform under extreme temperature variations in heavy machinery applications?

ADVANSTAR CWP multi-pass hydraulic hose - 350 BAR performs reliably across extreme temperature variations typical in heavy machinery applications. Its rated operating range of -40Â°C to +120Â°C for hydraulic oil means materials (black synthetic rubber inner and outer layers) remain flexible and chemically stable from deep cold to high heat. Four layers of spiral steel wire reinforcement maintain structural integrity and working pressure of 350 bar even when temperatures fluctuate. Increased flexibility (50% better bending radius) reduces stress at fittings in cold starts and confined routing, while MSHA flame-resistant outer layer adds thermal safety in hot environments. Lifespan validated by 500,000 impulse cycles further confirms durability under thermal and pressure cycling in large construction and hydraulic-driven equipment.

Can ADVANSTAR CWP multi-pass hydraulic hose - 350 BAR withstand abrasive environments and resist external wear?

ADVANSTAR CWP multi-pass hydraulic hose - 350 BAR offers several features that improve durability in demanding environments, but its resistance to abrasive external wear is limited by typical rubber outer layers. Why it performs well: - Reinforcement: four layers of spiral steel wire provide excellent structural strength and resistance to internal fatigue and pressure-related damage. - Proven durability: life confirmed to 500,000 impulse cycles indicates high resistance to internal wear and cyclic stress. - Operating range: wide temperature tolerance (â40Â°C to +120Â°C) supports use in varied climates without outerâlayer embrittlement. - Flame resistance (MSHA) of the outer layer adds protection against heat and ignition hazards. Limitations versus abrasion: - Outer layer material is black synthetic rubber, which offers general protection but is not described as specifically abrasionâresistant (e.g., no mention of specialized abrasion compounds or additional protective covers). - In heavily abrasive external environments (sharp rocks, constant rubbing, sand/grit exposure, metal-to-metal contact), the standard rubber outer cover may wear faster unless additional protection is applied. Recommendation: For abrasive conditions, use ADVANSTAR CWP multi-pass hydraulic hose - 350 BAR with supplemental protection such as abrasion sleeves, spiral guards, hose wraps, or routing changes to minimize contact and wear. For continuous heavy abrasion, consider hoses or covers specifically rated for high abrasion resistance.

ADVANSTAR CWP multi-pass hydraulic hose – 350 BAR

All products, Hydraulic rubber hoses/

Additional information

Material	synthetic rubber
Maximum operating temperature [°C]	120
Minimum operating temperature [°C]	-40
Reinforcement	4 steel braids

Multi-braided hydraulic hose for high, constant pressure for all diameters. Hose with increased flexibility (bending radius 50% better than standard norm). Hose lifespan confirmed by a test of 500,000 impulse cycles. Outer layer flame-resistant (MSHA). Used in hydraulic power systems of large construction machinery and all types of hydraulic-driven equipment. Standards: ISO 18752 CLASS 350 CC. Inner layer: black synthetic rubber. Reinforcement: four layers of spiral steel wire. Outer layer: black synthetic rubber. Working pressure: 350 bar. Operating temperature: from -40°C to +120°C (hydraulic oil).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HW-CWP-350-13	ADVANSTAR hydraulic hose CWP 350 bar 1/2" MSHA	12	350	In stock	Enquiry
HW-CWP-350-16	ADVANSTAR hydraulic hose CWP 350 bar 5/8" MSHA	16	350	In stock	Enquiry
HW-CWP-350-19	ADVANSTAR hydraulic hose CWP 350 bar 3/4" MSHA	20	350	In stock	Enquiry
HW-CWP-350-25	ADVANSTAR hydraulic hose CWP 350 bar 1" MSHA	25	350	In stock	Enquiry
HW-CWP-350-32	ADVANSTAR hydraulic hose CWP 350 bar 1.1/4" MSHA	32	350	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Multi-braided hydraulic hose for high, constant pressure for all diameters. Hose with increased flexibility (bending radius 50% better than standard norm). Hose lifespan confirmed by a test of 500,000 impulse cycles. Outer layer flame-resistant (MSHA). Used in hydraulic power systems of large construction machinery and all types of hydraulic-driven equipment. Standards: ISO 18752 CLASS 350 CC. Inner layer: black synthetic rubber. Reinforcement: four layers of spiral steel wire. Outer layer: black synthetic rubber. Working pressure: 350 bar. Operating temperature: from -40°C to +120°C (hydraulic oil).