Can the Air gun with FULL-JET nozzle, aluminum operate safely at 2â8 bar and what maintenance is required for long-term durability?

Yes. The Air gun with FULL-JET nozzle, aluminum is specified for safe operation at 2â8 bar and is designed to perform effectively across that range (FULL-JET 2.5 mm nozzle gives a notably stronger, wider jet already at 2 bar). For safe, reliable use and long-term durability follow these maintenance and usage points: - Use within rated limits: keep working pressure between 2 and 8 bar and operating temperature between -10Â°C and +50Â°C. - Secure connections: fit the correct connection (EUROSTANDARD 7.2 plug or proper hose coupling 6/9/13 mm) and ensure threads/seals (M12x1.25 nozzle thread) are tight and undamaged. - Clean nozzle and gun regularly: blow out or wipe to remove debris, chips and liquids that can clog the 2.5 mm nozzle; replace or swap nozzles if flow deteriorates. - Inspect for wear and damage: check the forged anodized aluminum body, lever mechanism and nozzle threads for cracks, corrosion or wear; replace worn nozzles or damaged parts. - Protect from contaminants: avoid excessive ingress of abrasive particles or corrosive fluids; if exposed, flush and dry the gun promptly. - Lubrication and moving parts: apply light pneumatic-grade lubrication to the lever/pivot points as recommended by your workshop practice to prevent sticking. - Pressure control and safety: fit a pressure regulator and use appropriate PPE; avoid dead-end blocking of the nozzle and follow compressed-air safety rules. - Store dry and protected: keep the gun in a clean, dry place when not in use to preserve anodizing and prevent corrosion. Following these steps will ensure safe operation across 2â8 bar and extend the service life of the Air gun with FULL-JET nozzle, aluminum.

Is the Air gun with FULL-JET nozzle, aluminum compatible with other nozzle types and couplings?

Is the Air gun with FULL-JET nozzle, aluminum compatible with other nozzle types and couplings? Yes. The Air gun with FULL-JET nozzle, aluminum has an interchangeable FULL-JET nozzle (M12x1.25 external thread), so other nozzles from the EWO gun accessories range can be installed. For couplings, the gun is offered with either a EUROSTANDARD 7.2 plug or hose couplings in 6 mm, 9 mm, and 13 mm diameters, depending on the chosen connection.

How does the Air gun with FULL-JET nozzle, aluminum perform in cold environments down to -10Â°C?

The Air gun with FULL-JET nozzle, aluminum performs reliably in cold environments down to -10Â°C. Its forged, anodized aluminum construction ensures high strength, durability and corrosion resistance even in harsh conditions. The specified operating temperature range (â10Â°C to +50Â°C) means the gun is rated for use at â10Â°C without loss of function. Practical points: - Mechanical operation: Flow regulation via lever remains functional at â10Â°C; anodized aluminum resists cold-related brittleness. - Nozzle performance: The FULL-JET 2.5 mm nozzle maintains a wider, more powerful air stream at 2 bar compared with standard nozzles, and will continue to deliver strong airflow at low temperatures as long as the air supply and pressure (2â8 bar) are maintained. - Connections: EUROSTANDARD or hose couplings (6, 9, 13 mm) are compatible in the stated temperature range; ensure seals and fittings used in your system are also rated for â10Â°C to avoid leaks. - Condensation/freezing risk: Compressed air can carry moisture that may condense and freeze in lines, fittings or nozzle, potentially restricting flow. Use appropriate air drying, filters or drain traps in the supply to prevent freezing in cold environments. - Maintenance: Regular inspection and, if needed, lubrication with low-temperature-compatible products will help sustain reliable operation. Conclusion: The Air gun with FULL-JET nozzle, aluminum is suitable for use down to â10Â°C, provided the compressed air system and seals are prepared to prevent moisture-related freezing.

An air gun with nozzle FULL-JET, aluminum

Air guns, All products/

Additional information

A high-quality aluminum compressed-air gun, intended for removing all contamination from surfaces: liquids, fine chips, filings, etc.. Flow adjustment by the degree of lever press. Made of forged aluminum, protected by anodizing, ensuring high strength, durability and corrosion resistance. It works perfectly even in difficult working conditions. A gun equipped is in nozzle FULL-JET o diameter 2.5 mm, replaceable, with a thread connection external M12x1.25, which is characterized significantly wider a stream air and greater power operation at a pressure of 2 bar, in comparison for standard nozzle o diameter hole 1.5 mm. instead of nozzle FULL-JET install can other nozzles – see accessories for guns EWO. depending on connections we distinguish A gun terminated a plug EUROSTANDARD 7.2 or fitting for hose o diameter 6 mm, 9 mm and 13 mm. Material: aluminum (forging). diameter hole nozzle: 2.5 mm. pressure operating: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
EW-269374	Air gun, nozzle Full-Jet, plug DN 7.2	-	6	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A high-quality aluminum compressed-air gun, intended for removing all contamination from surfaces: liquids, fine chips, filings, etc.. Flow adjustment by the degree of lever press. Made of forged aluminum, protected by anodizing, ensuring high strength, durability and corrosion resistance. It works perfectly even in difficult working conditions. A gun equipped is in nozzle FULL-JET o diameter 2.5 mm, replaceable, with a thread connection external M12x1.25, which is characterized significantly wider a stream air and greater power operation at a pressure of 2 bar, in comparison for standard nozzle o diameter hole 1.5 mm. instead of nozzle FULL-JET install can other nozzles – see accessories for guns EWO. depending on connections we distinguish A gun terminated a plug EUROSTANDARD 7.2 or fitting for hose o diameter 6 mm, 9 mm and 13 mm. Material: aluminum (forging). diameter hole nozzle: 2.5 mm. pressure operating: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.