Is Band-ItÂ® Ball-LokÂ® tape, coated, AISI 316 steel (BD-KE9229) compatible with potable water and food-contact applications given its full epoxy, non-toxic, halogen-free coating?

Yes. Band-ItÂ® Ball-LokÂ® tape, coated, AISI 316 steel (BD-KE9229) is suitable for potable water and food-contact applications based on the provided description. Reasons: - Base material AISI 316 stainless steel is widely accepted for food and potable water use due to its corrosion resistance and biocompatibility. - Full epoxy coating is described as non-toxic and halogen-free, which supports safety for incidental contact with water and food surfaces. - The coating offers increased corrosion protection, UV and temperature resistance, and high fire/corrosion resistance, reducing risk of degradation or leaching under normal service conditions. - Manual installation or use with tensioning/cutting tools does not inherently introduce contaminants if proper installation practices are followed. Caveats: - Final suitability depends on regulatory approvals and certifications for food-contact and potable water use in your jurisdiction (e.g., NSF/ANSI, FDA, WRAS, KTW). Confirm the presence of relevant third-party certifications or manufacturer declarations. - Ensure the specific coating formulation has been tested for extractables/migration and that installation/maintenance avoid coating damage exposing bare metal.

Does Band-ItÂ® Ball-LokÂ® tape, coated, AISI 316 steel (BD-KE9229) withstand marine and salt-spray environments without accelerated corrosion?

Yes. Band-ItÂ® Ball-LokÂ® tape, coated, AISI 316 steel (BD-KE9229) is designed for marine and salt-spray environments. Its AISI 316 stainless steel core provides strong inherent corrosion resistance to chlorides and seawater, and the full epoxy coating delivers increased corrosion protection, halogen-free, non-toxic barrier against salt spray, UV, and harsh temperatures. Combined, these features prevent accelerated corrosion compared with uncoated steels and make the product suitable for marine exposure when installed and maintained per manufacturer recommendations.

Can Band-ItÂ® Ball-LokÂ® tape, coated, AISI 316 steel (BD-KE9229) be reliably used near high-temperature exhausts or flues?

Yes. Band-ItÂ® Ball-LokÂ® tape, coated, AISI 316 steel (BD-KE9229) can be used near high-temperature exhausts or flues, but with reservations. Why itâs suitable: - Base material AISI 316 stainless steel has excellent high-temperature strength and corrosion resistance compared with common steels. - The product description states âhigh resistance to fireâ and âhigh and low temperatures,â indicating the design anticipates thermal exposure. - Full epoxy coating provides increased corrosion protection and is halogen-free/non-toxic, useful in aggressive environments. Caveats and practical limits: - Epoxy coatings have maximum service temperatures; typical epoxy systems begin to degrade or char above roughly 120â200Â°C (248â392Â°F). The exact temperature limit for this specific coating is not stated in the description, so you must confirm the coatingâs rated maximum temperature with the manufacturer. - In direct contact with very high-temperature exhausts or flues (e.g., automotive exhausts, industrial stacks, or furnace surfaces that exceed coating limits), the epoxy may soften, discolour, emit fumes, or fail over time even though the stainless core remains intact. - For prolonged exposure above the coating limit, uncoated AISI 316 or high-temperature-specific banding (ceramic or high-temp polymer coatings, or bare metal with suitable insulation) may be preferable. Recommendation: - Verify the operating temperature range of the epoxy coating from Band-It or the product datasheet. - If expected temperatures are within the coatingâs rated range, the Band-ItÂ® Ball-LokÂ® tape, coated, AISI 316 steel (BD-KE9229) is appropriate. - If temperatures exceed the coating rating or there is direct flame impingement, choose an alternative solution (uncoated AISI 316 or a high-temperature-rated banding product) or use thermal isolation between the hot surface and the coated tape.

Band-It® Ball-Lok® tape, coated, AISI 316 steel

All products, Band clamping system/

Additional information

Material	SS – stainless steel

Self-closing band in full epoxy coating (increased corrosion protection, non-toxic material, halogen-free) designed for easy and simple manual installation or using a tensioning and cutting tool (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation, and high and low temperatures. Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
BD-KE0218	Ball-Lok self-closing band, width 4.6 mm, L=150 mm coated, AISI 316	-	-	In stock	Enquiry
BD-KE0228	Ball-Lok self-closing band, width 4.6 mm, L=201 mm coated, AISI 316	-	-	In stock	Enquiry
BD-KE0238	Ball-Lok self-closing band, width 4.6 mm, L=259 mm coated, AISI 316	-	-	In stock	Enquiry
BD-KE0248	Ball-Lok self-closing strap, width 4.6 mm, L=360 mm coated, AISI 316	-	-	In stock	Enquiry
BD-KE0258	Ball-Lok self-closing band, width 4.6 mm, L=520 mm coated, AISI 316	-	-	In stock	Enquiry
BD-KE0268	Ball-Lok self-closing band, width 4.6 mm, L=679 mm coated, AISI 316	-	-	In stock	Enquiry
BD-KE0278	Ball-Lok self-closing band, width 4.6 mm, L=838 mm coated, AISI 316	-	-	In stock	Enquiry
BD-KE0428	Ball-Lok self-closing band, width 7.9 mm, L=201 mm coated, AISI 316	-	-	In stock	Enquiry
BD-KE0438	Ball-Lok self-closing band, width 7.9 mm, L=259 mm coated, AISI 316	-	-	In stock	Enquiry
BD-KE0448	Ball-Lok self-closing band, width 7.9 mm, L=360 mm coated, AISI 316	-	-	In stock	Enquiry
BD-KE0458	Ball-Lok self-closing band, width 7.9 mm, L=520 mm coated, AISI 316	-	-	In stock	Enquiry
BD-KE0468	Ball-Lok self-closing band, width 7.9 mm, L=679 mm coated, AISI 316	-	-	In stock	Enquiry
BD-KE0478	Ball-Lok self-closing strap, width 7.9 mm, L=838 mm coated, AISI 316	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Self-closing band in full epoxy coating (increased corrosion protection, non-toxic material, halogen-free) designed for easy and simple manual installation or using a tensioning and cutting tool (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation, and high and low temperatures. Material: AISI 316 steel.