Is the BANJO adaptor with male thread, carbon steel, type R-G compatible with both external metric and BSP threads using its 60Â° cone sealing?

Yes. The BANJO adaptor with male thread, carbon steel, type R-G (60Â° cone sealing) is designed to be compatible with both external metric and BSP threads that use a 60Â° cone seat. Its sealing relies on the 60Â° cone face rather than thread form, so it can mate with either external metric or BSP male threads provided the mating component has a matching 60Â° cone seat and correct size. Ensure thread size and pitch match the adaptorâs dimensions; mismatched thread profiles/pitches (e.g., metric vs. BSPT/BSPP) must not be forced. For reliable sealing and mechanical fit, verify the exact thread designation and seat angle on both parts before assembly.

Can the BANJO adaptor with male thread, carbon steel, type R-G be used interchangeably on fittings with external metric or BSP threads using its 60Â° cone seal?

No. The BANJO adaptor with male thread, carbon steel, type R-G Format uses a 60Â° cone sealing designed to mate with matching female ports that have the corresponding 60Â° cone seat geometry and correct thread specification. It cannot be safely used interchangeably between external metric and BSP threaded fittings unless the mating female port is specifically manufactured to accept the same 60Â° cone geometry and the thread form, pitch and diameter are an exact match. Mixing metric and BSP threads risks improper engagement, thread damage, loss of sealing, and leakage. Always verify thread type and seat geometry or use the correctly specified adaptor.

Does the BANJO adaptor with male thread, carbon steel, type R-G support both external metric and BSP threads with its 60Â° cone seal?

Yes. The BANJO adaptor with male thread, carbon steel, type R-G supports both external metric and BSP threads using its 60Â° cone seal. The product description specifically states "R-G type BANJO adapter with external metric or BSP thread, 60Â° cone sealing," which indicates that the male-threaded R-G variant is designed to accommodate either external metric or BSP threaded mates while sealing via the 60Â° cone. Material (carbon steel, galvanized) does not affect the thread compatibility; it only describes construction and corrosion protection.

BANJO adaptor with male thread, carbon steel, type R-G

All products, Low-pressure fittings and adapters/

Additional information

Material	CS – steel (cast iron)

R-G type BANJO adapter with external metric or BSP thread, 60° cone sealing. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EC-106908	Banjo Adapter R-G 8 mm, GZ M10x1, 60° cone	-	30	In stock	Enquiry
EC-106910	Banjo Adapter R-G 10 mm, GZ M12x1.5, 60° cone	-	30	In stock	Enquiry
EC-106912	Banjo Adapter R-G 12 mm, GZ M14x1.5, 60° cone	-	30	In stock	Enquiry
EC-106913	Banjo adapter R-G 14 mm, GZ 1/4" BSP, 60° cone	-	30	In stock	Enquiry
EC-106914	Banjo adapter R-G 14 mm, GZ M14x1.5, 60° cone	-	30	In stock	Enquiry
EC-106915	Banjo adapter R-G 14 mm, GZ M16x1.5, 60° cone	-	30	In stock	Enquiry
EC-106916	Banjo adapter R-G 16 mm, female thread M18x1.5, 60° cone	-	30	In stock	Enquiry
EC-106918	Banjo adapter R-G 18 mm, GZ M22x1.5, 60° cone	-	30	In stock	Enquiry