Is the Bridge with two sockets and with connecting tube, DYROS series 40 compatible with potable water systems given its brass body and viton socket seals?

Bridge with two sockets and with connecting tube, DYROS series 40 Format: Given the materials and specifications provided, the Bridge with two sockets and with connecting tube, DYROS series 40 is likely suitable for potable (drinking) water systems, but final confirmation requires additional compliance details. Rationale: brass body is commonly used and acceptable for potable water fittings when the alloy meets potable-water standards (e.g., low-lead brass such as UNS C27450 / DZR or compliant with local regulations). Viton (FKM) socket seals are chemically resistant and generally safe for potable water, though some potable-water authorities prefer EPDM or other approved elastomers; approval depends on the specific grade and certification of the Viton used. Working pressure 15 bar is adequate for typical potable water distribution. Required confirmation: certification or declarations that the specific brass alloy is lead-safe/low-lead and compliant with relevant potable-water standards (e.g., NSF/ANSI 61, WRAS, ACS, KIWA or local equivalents), and that the Viton seals are approved for drinking water contact. Without those certifications, you cannot definitively state regulatory suitability despite the promising materials.

Can the Bridge with two sockets and with connecting tube, DYROS series 40 be installed outdoors without additional corrosion protection?

Bridge with two sockets and with connecting tube, DYROS series 40 is made of brass with Viton seals and rated to 15 bar. Brass has good corrosion resistance for many outdoor environments but is not immune to dezincification or aggressive atmospheres (marine, industrial, high sulphur/acidic conditions). If the installation is in a normal inland, non-corrosive environment, additional corrosion protection is generally not required. For marine/coastal or chemically aggressive environments, or where long-term exposure to salts/acidic pollutants is expected, apply additional corrosion protection or choose a more resistant material/coating. When in doubt, consult site-specific corrosion guidance or the manufacturer.

Does the Bridge with two sockets and with connecting tube, DYROS series 40 meet FDA or EU drinking water approvals?

Bridge with two sockets and with connecting tube, DYROS series 40 Format: based on the provided description (brass body, viton sealing, working pressure 15 bar) there is insufficient information to confirm compliance with FDA or EU drinking water approvals. Compliance depends on specific material grades, additives, manufacturing processes, and test/certification documentation: - FDA: For contact with potable water the FDA requires that any elastomer or polymer used be made from FDA-listed raw materials and that the finished article complies with 21 CFR where applicable. âVitonâ is a brand of fluoroelastomer; some formulations may be FDA-compliant but not all. You must confirm the specific Viton grade and supplier declaration of conformity. - EU (Drinking Water Directive / national regulations / EN standards): EU potable water compliance typically requires testing to standards such as EN 1483/EN 681 for seals, and overall approval may require testing for specific migration, odor/taste, and metal release (e.g., nickel, lead) under relevant standards (e.g., EN 15664, EN 12164/12165 for brass alloys). Brass composition (lead content) and any surface treatments affect compliance. To determine if Bridge with two sockets and with connecting tube, DYROS series 40 Format meets FDA or EU drinking water approvals you need: 1) Manufacturerâs declarations/certificates: FDA food contact statement or 21 CFR reference; EU/WRAS/KTW/DVGW/ACS or national approval certificates. 2) Material datasheets listing specific brass alloy and the exact Viton grade with regulatory status. 3) Test reports for metal migration and overall compliance with applicable drinking water standards. Conclusion: Cannot confirm compliance from the given description alone. Request the manufacturerâs material specifications and certification documents to verify FDA and EU potable water approvals.

Bridge with two sockets and with connecting tube, DYROS series 40

Additional information

Bridge with two sockets and a shut-off valve with a connecting tube. Designed for the DYROS system – series 40. Material: brass. Sealing material of the sockets: viton. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DY-LKD481-125	Bridge series 40, L=125 mm	-	-	In stock	Enquiry
DY-LKD481-250	Bridge series 40, L=250 mm	-	-	In stock	Enquiry
DY-LKD481-500	Bridge series 40, L=500 mm	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Bridge with two sockets and a shut-off valve with a connecting tube. Designed for the DYROS system – series 40. Material: brass. Sealing material of the sockets: viton. Working pressure: 15 bar.