Can BSP female threaded screw, stainless steel, type VT108 handle 10 bar working pressure with metal-metal cone sealing in industrial pipe connections?

Yes. BSP female threaded screw, stainless steel, type VT108 can handle 10 bar working pressure with metalâonâmetal cone sealing in industrial pipe connections. The product description specifies AISI 316 construction and a cone (metalâmetal) seal with a working pressure of 10 bar, which indicates it is designed and rated for that service. Note that actual performance depends on correct installation, compatibility with the mating fitting, thread engagement, surface condition of the cone seats, and manufacturer tolerances; dimensions may vary slightly by manufacturer, so follow supplier installation instructions and pressure ratings for the full assembly.

Is BSP female threaded screw, stainless steel, type VT108 suitable for 10 bar industrial pipe connections with metal-metal cone sealing?

Yes. BSP female threaded screw, stainless steel, type VT108 is suitable for 10 bar industrial pipe connections with metalâmetal cone sealing. The description specifies BSP threaded fitting for industrial pipe connections, cone (metalâmetal) seal, AISI 316 stainless steel material, and working pressure 10 bar. Note that dimensions may vary slightly by manufacturer, so verify exact sizing and compatibility with your mating parts before installation.

Does BSP female threaded screw, stainless steel, type VT108 provide reliable cone (metal-metal) sealing at 10 bar?

Yes. BSP female threaded screw, stainless steel, type VT108 can provide a reliable metalâtoâmetal (cone) seal at 10 bar when used and installed correctly. The product description specifies a cone (metalâmetal) sealing design, AISI 316 stainless steel construction, and a working pressure of 10 bar, which indicates the fitting is intended and rated for that pressure. For reliable performance ensure: - Correct mating components: use the matching male cone seat designed for BSP cone sealing geometry. - Proper assembly: follow recommended torque and alignment to compress the cone faces evenly without crossâthreading. - Surface condition: mating surfaces should be free of damage, corrosion, burrs or debris that could prevent full metal contact. - Application limits: avoid dynamic misalignment, excessive vibration, or thermal cycling beyond the fittingâs design, which can compromise a metalâmetal seal. - Medium compatibility: AISI 316 is broadly corrosion resistant, but verify compatibility with the specific fluid and temperature range. - Manufacturer tolerances: dimensions may vary slightly by manufacturer; confirm dimensional match and any certified test data if critical. If these conditions are met, the BSP female threaded screw, stainless steel, type VT108 should reliably seal metalâtoâmetal at the specified 10 bar working pressure.

BSP female threaded screw, stainless steel, type VT108

Additional information

Material	SS – stainless steel

BSP threaded fitting for use in pipe connections of industrial installations. Fitting seal: cone (metal-metal). Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
NM-VT108-04	Screw fitting with G 1/4" BSP, AISI 316	-	10
NM-VT108-06	Screw fitting with G thread BSP 3/8", AISI 316	-	10
NM-VT108-08	Fitting with G thread BSP 1/2", AISI 316	-	10
NM-VT108-12	Fitting with G thread BSP 3/4", AISI 316	-	10
NM-VT108-16	Screw connection with G thread BSP 1", AISI 316	-	10
NM-VT108-20	Screw connection with G thread BSP 1.1/4", AISI 316	-	10
NM-VT108-24	Fitting with G thread BSP 1.1/2", AISI 316	-	10
NM-VT108-32	Screw connection with G thread BSP 2", AISI 316	-	10
NM-VT108-40	Screw connection with G thread BSP 2.1/2", AISI 316	-	10
NM-VT108-48	Screw connection with G thread BSP 3", AISI 316	-	10

BSP threaded fitting for use in pipe connections of industrial installations. Fitting seal: cone (metal-metal). Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.