What is BURGACLIP soldering tip, steel, type 54743 used for with 3090 type air conditioning hose?

The BURGACLIP soldering tip, steel, type 54743 is a steel end fitting designed to be soldered onto 3090 type air conditioning hose to create a durable, leak-resistant connection point. It serves as the reinforced termination for the hose, allowing attachment of clips or clamps (sold separately) to secure the hose to fittings or components. Use of the BURGACLIP soldering tip provides a clean, mechanically strong joint and helps maintain proper sealing and alignment in HVAC systems where 3090 hoses are employed.

How do I properly install BURGACLIP soldering tip, steel, type 54743 on a 3090 type air conditioning hose?

To install the BURGACLIP soldering tip, steel, type 54743 on a 3090 type air conditioning hose, follow these steps: 1. Ensure system is depressurized and hose ends are clean and dry. 2. Slide the appropriate clip or clamp (sold separately) over the hose end before fitting the tip. 3. Insert the hose onto the 3090 fitting or pipe until it seats fully. 4. Position the BURGACLIP soldering tip, steel, type 54743 over the joint so it covers the connection area evenly. 5. Place the clip/clamp over the tip and hose, aligning it centrally. 6. Tighten the clip/clamp securely according to manufacturer torque or until the tip is held firmly-avoid over-tightening that could deform the hose or tip. 7. If soldering is required, apply heat evenly to the BURGACLIP soldering tip, steel, type 54743 and solder as specified for the hose and fitting materials. Allow to cool before testing. 8. Leak-test the assembly under low pressure, then full operating pressure.

Can BURGACLIP soldering tip, steel, type 54743 be used with other hose types besides 3090?

Possibly, but compatibility isnât guaranteed. Explanation: The product description for BURGACLIP soldering tip, steel, type 54743 specifies it is a soldering end intended for the 3090 type air conditioning hose. That indicates the part was designed to match the dimensions, wall thickness and mechanical/thermal requirements of the 3090 hose family. Because of that, using it with other hose types is only advisable if the alternative hose shares the same geometry and material compatibility (outer/inner diameters, wall thickness, and the hoseâs reinforcement) and if the clamp or clip used provides equivalent sealing and mechanical retention. Practical guidance: - Check dimensions: confirm inner/outer diameters and wall thickness of the other hose match 3090 specifications. - Check material compatibility: steel tip against hose materials and refrigerant/oil used. - Check clamp/clip fit: BURGACLIP soldering tip, steel, type 54743 may rely on specific clip shapes; clips/clamps are sold separately and the correct clamp must suit the hose used. - If in doubt, use the tip specified for that hose type or consult manufacturer/technical datasheets to avoid leaks, poor mechanical joint or premature failure. Conclusion: You can use BURGACLIP soldering tip, steel, type 54743 with other hose types only when physical and material specs match; otherwise do not.

BURGACLIP soldering tip, steel, type 54743

Additional information

Material	CS – steel (cast iron)

BURGACLIP soldering end for 3090 type air conditioning hose. Clips and clamps are available as a separate assortment. Material: steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
BU-54743-06-06-S	End. BC for soldering 3/8", hose 5/16", steel	-	35	In stock	Enquiry
BU-54743-06-08-S	End. BC for soldering 3/8", hose 13/32", steel	-	35	In stock	Enquiry
BU-54743-08-08-S	End. BC for soldering 1/2", hose 13/32", steel	-	35	In stock	Enquiry
BU-54743-08-10-S	End. BC for soldering 1/2", hose 1/2", steel	-	35	In stock	Enquiry
BU-54743-10-10-S	End. BC for soldering 5/8", hose 1/2", steel	-	35	In stock	Enquiry
BU-54743-10-12-S	End. BC for soldering 5/8", hose 5/8", steel	-	35	In stock	Enquiry
BU-54743-12-12-S	End. BC for soldering 3/4", hose 5/8", steel	-	35	In stock	Enquiry
BU-54743-12-14-S	End. BC for soldering 3/4", hose 3/4", steel	-	35	In stock	Enquiry