Can Food-grade hose for water, juices, and beverages TYGONÂ® S3â¢ B-44-3 be sterilized with steam or ethylene oxide without affecting its performance?

Yes. Food-grade hose for water, juices, and beverages TYGONÂ® S3â¢ B-44-3 can be sterilized by steam or ethylene oxide without affecting its performance, as indicated in the product description. The hose is made from a special PVC formulation designed for food contact (meets European 1935/2004/EC and 10/2011, FDA, NSF-51, NSF-61, 3-A, Japanese #370/1959 and MHLW370(3-D)), is free of phthalates and BPA, and is expressly stated to allow sterilization by steam or ethylene oxide. Maximum operating temperature is +74Â°C (brittleness temperature -36Â°C), so steam sterilization should be applied within the hoseâs temperature limits and appropriate process parameters. Its non-wetting, easy-drain properties support cleaning and rinsing after sterilization. For critical applications, validate your specific sterilization cycle (temperature, pressure, exposure time, and any EO aeration) to ensure compatibility with the hose length, fittings, and installed system and to maintain warranty and regulatory compliance.

Is Food-grade hose for water, juices, and beverages TYGONÂ® S3â¢ B-44-3 safe for use with peristaltic pumps without accelerating wear?

Food-grade hose for water, juices, and beverages TYGONÂ® S3â¢ B-44-3: Yes, it is safe for use with peristaltic pumps, but expect moderate hose lifespan rather than exceptional durability. The PVC formulation is food-grade, phthalate- and BPA-free, meets major hygiene and food-contact standards (EU 1935/2004 and 10/2011, FDA, NSF-51, NSF-61, 3-A, Japanese MHLW), and resists taste/odor transfer with non-wetting, easy-drain properties. It can be sterilized (steam or EtO). Mechanical data (66Â° Shore A hardness, max operating +74Â°C, brittleness -36Â°C) and the moderate wear note indicate acceptable performance in peristaltic pumps but with faster wear compared to hoses optimized specifically for long peristaltic life; plan for periodic replacement.

Does Food-grade hose for water, juices, and beverages TYGONÂ® S3â¢ B-44-3 meet NSF-51 and FDA food-contact standards?

Food-grade hose for water, juices, and beverages TYGONÂ® S3â¢ B-44-3 Format meets NSF-51 and FDA food-contact standards. It also complies with European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), NSF-61, 3-A, Japanese #370/1959 and MHLW370(3-D), REACH and California Proposition 65. Sterilizable by steam or ethylene oxide; designed to be phthalate- and BPA-free, non-taste- and non-odor-altering, and suitable for peristaltic pumps with moderate lifespan.

Food-grade hose for water, juices, and beverages TYGON® S3™ B-44-3

All products, TYGON® hoses/

Additional information

Material	PVC – polyvinyl chloride
Maximum operating temperature [°C]	74
Vacuum resistance	yes
Standard length [m]	15, 25, 60/ 120

Colorless, glassy transparent, flexible hose free of phthalates and BPA (Bisphenol A). Designed for the transfer and dispensing of food products, particularly juices, beverages, and bottled water. Does not alter the taste and smell of products, and its non-wetting properties allow for complete drainage and easy cleaning by rinsing. Can be used with peristaltic pumps, but the lifespan is moderate. Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, NSF-51, NSF61, 3-A, Japanese #370/1959 and MHLW370(3-D). Sterilization by steam or ethylene oxide is possible. Compliant with REACH and California Proposition 65 – does not contain hazardous and prohibited substances. Full hose roll length is 15 m (from internal diameter 50.8 mm – 6 m). The specified working pressure is relative to the burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: +74°C. Brittleness temperature: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
VE-AAB00002-C	Hose TYGON S3 B-44-3 1.6x3.2 mm	2	4.1
VE-AAB00003-C	Hose TYGON S3 B-44-3 1.6x4.8 mm	2	6.9
VE-AAB00004-C	Hose TYGON S3 B-44-3 2.4x4 mm	2	3
VE-AAB00005-C	Hose TYGON S3 B-44-3 2.4x5.6 mm	2	5.1
VE-AAB00006-C	Hose TYGON S3 B-44-3 3.2x4.8 mm	3	2.3
VE-AAB00007-C	Hose TYGON S3 B-44-3 3.2x6.4 mm	3	4.1
VE-AAB00009-C	Hose TYGON S3 B-44-3 4x5.6 mm	4	1.9
VE-AAB00010-C	Hose TYGON S3 B-44-3 4x7.1 mm	4	3.4
VE-AAB00011-C	Hose TYGON S3 B-44-3 4.8x6.4 mm	5	1.7
VE-AAB00012-C	Hose TYGON S3 B-44-3 4.8x7.9 mm	5	3
VE-AAB00014-C	Hose TYGON S3 B-44-3 4.8x11.1 mm	5	5.1
VE-AAB00016-C	Hose TYGON S3 B-44-3 6.4x7.9 mm	6	1.3
VE-AAB00017-C	Hose TYGON S3 B-44-3 6.4x9.5 mm	6	2.3
VE-AAB00018-C	Hose TYGON S3 B-44-3 6.4x11.1 mm	6	3.2
VE-AAB00019-C	Hose TYGON S3 B-44-3 6.4x12.7 mm	6	4.1
VE-AAB00022-C	Hose TYGON S3 B-44-3 7.9x11.1 mm	8	1.9
VE-AAB00023-C	Hose TYGON S3 B-44-3 7.9x12.7 mm	8	2.8
VE-AAB00027-C	Hose TYGON S3 B-44-3 9.5x12.7 mm	10	1.7
VE-AAB00028-C	Hose TYGON S3 B-44-3 9.5x14.3 mm	10	2.3
VE-AAB00029-C	Hose TYGON S3 B-44-3 9.5x15.9 mm	10	3
VE-AAB00036-C	Hose TYGON S3 B-44-3 12.7x15.9 mm	12	1.3
VE-AAB00037-C	Hose TYGON S3 B-44-3 12.7x17.5 mm	12	1.9
VE-AAB00038-C	Hose TYGON S3 B-44-3 12.7x19.1 mm	12	2.3
VE-AAB00046-C	Hose TYGON S3 B-44-3 15.9x22.3 mm	16	2
VE-AAB00051-C	Hose TYGON S3 B-44-3 17.5x23.9 mm	18	1.9
VE-AAB00053-C	Hose TYGON S3 B-44-3 19x25.4 mm	20	1.7
VE-AAB00059	Hose TYGON S3 B-44-3 22.2x28.6 mm	22	1.5
VE-AAB00062	Hose TYGON S3 B-44-3 25.4x31.8 mm	25	1.4
VE-AAB00064	Hose TYGON S3 B-44-3 25.4x35 mm	25	1.9
VE-AAB00065	Hose TYGON S3 B-44-3 25.4x38.2 mm	25	2.3
VE-AAB00071	Hose TYGON S3 B-44-3 31.8x44.4 mm	32	1.9
VE-AAB00073	Hose TYGON S3 B-44-3 38.1x47.7 mm	38	1.3
VE-AAB00074	Hose TYGON S3 B-44-3 38.1x50.9 mm	38	1.7
VE-AAB00076	Hose TYGON S3 B-44-3 44.4x57.2 mm	45	1.5

Colorless, glassy transparent, flexible hose free of phthalates and BPA (Bisphenol A). Designed for the transfer and dispensing of food products, particularly juices, beverages, and bottled water. Does not alter the taste and smell of products, and its non-wetting properties allow for complete drainage and easy cleaning by rinsing. Can be used with peristaltic pumps, but the lifespan is moderate. Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, NSF-51, NSF61, 3-A, Japanese #370/1959 and MHLW370(3-D). Sterilization by steam or ethylene oxide is possible. Compliant with REACH and California Proposition 65 – does not contain hazardous and prohibited substances. Full hose roll length is 15 m (from internal diameter 50.8 mm – 6 m). The specified working pressure is relative to the burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: +74°C. Brittleness temperature: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.