Is the PERFORMER 1SN long life hydraulic hose compatible with air at pressures above 17 bar, and does it require outer layer micro-perforation?

PERFORMER 1SN long life hydraulic hose is specified for use with water and air (max operating temperature +70Â°C). For air above 17 bar the description states that outer layer micro-perforation is required. Therefore: yes, the hose can be used with air at pressures above 17 bar, but micro-perforation of the outer layer is required for such air applications.

Can the PERFORMER 1SN long life hydraulic hose be used with water at temperatures up to +70Â°C and different pressures?

Yes. The PERFORMER 1SN long life hydraulic hose can be used with water at temperatures up to +70Â°C. Working pressure depends on hose diameter (40â250 bar); ensure the selected diameter supports your required pressure. Note: the hoseâs overall operating temperature range is â40Â°C to +100Â°C (temporary +120Â°C), but for water and air the maximum permitted operating temperature is +70Â°C. Also, if using air above 17 bar, micro-perforation of the outer layer is required (not applicable to water).

Does the PERFORMER 1SN long life hydraulic hose tolerate continuous operation at +100Â°C (or temporary +120Â°C)?

Yes. PERFORMER 1SN long life hydraulic hose is rated for continuous operation up to +100Â°C and for short-term exposure up to +120Â°C. Note the following limits and conditions from the specification: - General operating temperature range: â40Â°C to +100Â°C (temporary up to +120Â°C). - For water and air media: maximum operating temperature +70Â°C. - For air service above 17 bar: micro-perforation of the outer layer is required. Ensure you also observe the rated working pressure for the hose diameter in use (40â250 bar) and the application-specific requirements for media and pressure when operating at elevated temperatures.

PERFORMER 1SN long life hydraulic hose

All products, Hydraulic rubber hoses/

Additional information

Material	synthetic rubber
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40

General-purpose hydraulic hose with increased lifespan compared to the standard. Confirmed hose lifespan of 300,000 impulse cycles. Standards: EN 853 1SN, ISO 1436-1SN, SAE 100R1S-AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 250 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +120°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
HW-1SN-06P	PERFORMER 1SN 1/4" hydraulic hose	6	225
HW-1SN-08P	PERFORMER 1SN 5/16" hydraulic hose	8	215
HW-1SN-10P	PERFORMER 1SN 3/8" hydraulic hose	10	180
HW-1SN-13P	PERFORMER 1SN 1/2" hydraulic hose	12	160
HW-1SN-16P	PERFORMER 1SN 5/8" hydraulic hose	16	130
HW-1SN-19P	PERFORMER 1SN 3/4" hydraulic hose	20	105
HW-1SN-25P	PERFORMER 1SN 1" hydraulic hose	25	90
HW-1SN-32P	PERFORMER 1SN 1.1/4" hydraulic hose	32	63
HW-1SN-38P	PERFORMER 1SN 1.1/2" hydraulic hose	38	50
HW-1SN-51P	PERFORMER 1SN 2" hydraulic hose	50	40

General-purpose hydraulic hose with increased lifespan compared to the standard. Confirmed hose lifespan of 300,000 impulse cycles. Standards: EN 853 1SN, ISO 1436-1SN, SAE 100R1S-AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 250 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +120°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.