Mini double-acting pneumatic actuator, without magnet, without cushioning ISO 6432 STD

, /
Mini double-acting pneumatic actuator, without magnet, without cushioning ISO 6432 STD

Additional information

Maximum operating temperature [°C]

80

Minimum operating temperature [°C]

-10

Standard length [m]

15, 4.5, 40, 50, 60

Mini double-acting cylinder ISO 6432 STD, type 110, without magnet, without cushioning. It is designed to operate with filtered oil-lubricated or non-oil-lubricated air and does not require additional maintenance. The cylinder is made with a stainless steel sleeve. The dimensions of the outer covers for certain diameters have been reduced, allowing for installation in confined and restricted spaces. The lifespan of cylinders with NBR seals is 15 million cycles, with polyurethane seals 30 million cycles. The presented values should not be considered binding or guaranteed, but only as a reference due to the variability of many factors, including radial and axial loads, speed, temperature, or air losses (limit values). Piston diameter: Ø 8, 10, 12, 16, 20, and 25 mm. Stroke length: from 5 to 500 mm. Operating pressure: from 0.8 to 10 bar (Ø 8, 10, 12 mm); from 0.6 to 10 bar (Ø 16, 20, 25 mm). Sealing: polyurethane, NBR, FKM/FPM. Operating temperature: from -10°C to +150°C depending on the seal used.

List of product variants

Article numberProduct variant nameNominal inner diameterWorking pressure [bar]Enquiry
MW-1100080010XNISO 6432 actuator 08-0010-10
MW-1100080010XPISO 6432 actuator 08-0010-10
MW-1100080020XPISO 6432 actuator 08-0020-10
MW-1100080025XNISO 6432 actuator 08-0025-10
MW-1100080025XPISO 6432 actuator 08-0025-10
MW-1100080050XNISO 6432 actuator 08-0050-10
MW-1100080050XPISO 6432 actuator 08-0050-10
MW-1100080080XNISO 6432 actuator 08-0080-10
MW-1100080080XPISO 6432 actuator 08-0080-10
MW-1100080100XNISO 6432 actuator 08-0100-10
MW-1100080100XPISO 6432 actuator 08-0100-10
MW-1100100010XNISO 6432 Actuator 10-0010-10
MW-1100100010XPISO 6432 actuator 10-0010-10
MW-1100100015XNISO 6432 Actuator 10-0015-10
MW-1100100015XPISO 6432 Actuator 10-0015-10
MW-1100100025XNISO 6432 actuator 10-0025-10
MW-1100100025XPISO 6432 actuator 10-0025-10
MW-1100100040XPISO 6432 actuator 10-0040-10
MW-1100100050XNISO 6432 actuator 10-0050-10
MW-1100100050XPISO 6432 actuator 10-0050-10
MW-1100100080XNISO 6432 Actuator 10-0080-10
MW-1100100080XPISO 6432 actuator 10-0080-10
MW-1100100100XNISO 6432 actuator 10-0100-10
MW-1100100100XPISO 6432 actuator 10-0100-10
MW-1100120015XPISO 6432 actuator 12-0015-10
MW-1100120025XPISO 6432 actuator 12-0025-10
MW-1100120025ZVISO 6432 actuator 12-0025-10
MW-1100120040XPISO 6432 actuator 12-0040-10
MW-1100120050XPISO 6432 actuator 12-0050-10
MW-1100160005ZVISO 6432 actuator 16-0005-10
MW-1100160010CNISO 6432 actuator 16-0010-10
MW-1100160010CPISO 6432 Actuator 16-0010-10
MW-1100160012CPISO 6432 Actuator 16-0012-10
MW-1100160015CPISO 6432 actuator 16-0015-10
MW-1100160025CNISO 6432 actuator 16-0025-10
MW-1100160025CPISO 6432 actuator 16-0025-10
MW-1100160025XPISO 6432 Actuator 16-0025-10
MW-1100160035CPISO 6432 actuator 16-0035-10
MW-1100160040CPISO 6432 actuator 16-0040-10
MW-1100160050CNISO 6432 Actuator 16-0050-10
MW-1100160050CPISO 6432 Actuator 16-0050-10
MW-1100160050ZVISO 6432 Actuator 16-0050-10
MW-1100160080AVISO 6432 Actuator 16-0080-10
MW-1100160080CNISO 6432 Actuator 16-0080-10
MW-1100160080CPISO 6432 Actuator 16-0080-10
MW-1100160100CNISO 6432 actuator 16-0100-10
MW-1100160100CPISO 6432 actuator 16-0100-10
MW-1100160125CNISO 6432 actuator 16-0125-10
MW-1100160125CPISO 6432 actuator 16-0125-10
MW-1100160140CPISO 6432 Actuator 16-0140-10
MW-1100160160CNISO 6432 actuator 16-0160-10
MW-1100160160CPISO 6432 actuator 16-0160-10
MW-1100160180CNISO 6432 actuator 16-0180-10
MW-1100160200CNISO 6432 actuator 16-0200-10
MW-1100160200CPISO 6432 actuator 16-0200-10
MW-1100160225XPISO 6432 actuator 16-0225-10
MW-1100200010CNISO 6432 actuator 20-0010-10
MW-1100200010CPISO 6432 actuator 20-0010-10
MW-1100200015CPISO 6432 actuator 20-0015-10
MW-1100200020CPISO 6432 actuator 20-0020-10
MW-1100200025CNISO 6432 actuator 20-0025-10
MW-1100200025CPISO 6432 actuator 20-0025-10
MW-1100200025XPISO 6432 actuator 20-0025-10
MW-1100200025ZVISO 6432 actuator 20-0025-10
MW-1100200040CPISO 6432 actuator 20-0040-10
MW-1100200050CNISO 6432 actuator 20-0050-10
MW-1100200050CPISO 6432 actuator 20-0050-10
MW-1100200070CNISO 6432 actuator 20-0070-10
MW-1100200080CNISO 6432 actuator 20-0080-10
MW-1100200080CPISO 6432 actuator 20-0080-10
MW-1100200100CNISO 6432 actuator 20-0100-10
MW-1100200100CPISO 6432 actuator 20-0100-10
MW-1100200125CNISO 6432 actuator 20-0125-10
MW-1100200125CPISO 6432 actuator 20-0125-10
MW-1100200160CNISO 6432 actuator 20-0160-10
MW-1100200160CPISO 6432 actuator 20-0160-10
MW-1100200180CNISO 6432 actuator 20-0180-10
MW-1100200200CNISO 6432 actuator 20-0200-10
MW-1100200200CPISO 6432 actuator 20-0200-10
MW-1100200250CNISO 6432 actuator 20-0250-10
MW-1100200250CPISO 6432 actuator 20-0250-10
MW-1100200320CNISO 6432 actuator 20-0320-10
MW-1100200320CPISO 6432 actuator 20-0320-10
MW-1100250010CNISO 6432 actuator 25-0010-10
MW-1100250010CPISO 6432 actuator 25-0010-10
MW-1100250020CPISO 6432 actuator 25-0020-10
MW-1100250025CNISO 6432 actuator 25-0025-10
MW-1100250025CPISO 6432 actuator 25-0025-10
MW-1100250025XPISO 6432 actuator 25-0025-10
MW-1100250030CNISO 6432 actuator 25-0030-10
MW-1100250030CPISO 6432 actuator 25-0030-10
MW-1100250040AVISO 6432 actuator 25-0040-10
MW-1100250040CNISO 6432 actuator 25-0040-10
MW-1100250040CPISO 6432 actuator 25-0040-10
MW-1100250045CPISO 6432 actuator 25-0045-10
MW-1100250050AVISO 6432 actuator 25-0050-10
MW-1100250050CNISO 6432 actuator 25-0050-10
MW-1100250050CPISO 6432 actuator 25-0050-10
MW-1100250070CPISO 6432 actuator 25-0070-10
MW-1100250075CNISO 6432 actuator 25-0075-10
MW-1100250075CPISO 6432 actuator 25-0075-10
MW-1100250080AVISO 6432 actuator 25-0080-10
MW-1100250080CNISO 6432 actuator 25-0080-10
MW-1100250080CPISO 6432 actuator 25-0080-10
MW-1100250100CNISO 6432 actuator 25-0100-10
MW-1100250100CPISO 6432 actuator 25-0100-10
MW-1100250100ZVISO 6432 actuator 25-0100-10
MW-1100250125CNISO 6432 actuator 25-0125-10
MW-1100250125CPISO 6432 actuator 25-0125-10
MW-1100250150CPISO 6432 actuator 25-0150-10
MW-1100250160CNISO 6432 actuator 25-0160-10
MW-1100250160CPISO 6432 actuator 25-0160-10
MW-1100250160XNISO 6432 actuator 25-0160-10
MW-1100250200CNISO 6432 actuator 25-0200-10
MW-1100250200CPISO 6432 actuator 25-0200-10
MW-1100250200XNISO 6432 actuator 25-0200-10
MW-1100250250CNISO 6432 actuator 25-0250-10
MW-1100250250CPISO 6432 actuator 25-0250-10
MW-1100250320CNISO 6432 actuator 25-0320-10
MW-1100250320CPISO 6432 actuator 25-0320-10
MW-1100250400CPISO 6432 actuator 25-0400-10
MW-1100250420CNISO 6432 actuator 25-0420-10
MW-1100250500CNISO 6432 actuator 25-0500-10
MW-1100250500CPISO 6432 actuator 25-0500-10
MW-1100250500XPISO 6432 actuator 25-0500-10
Mini double-acting pneumatic actuator, without magnet, without cushioning ISO 6432 STD

Mini double-acting cylinder ISO 6432 STD, type 110, without magnet, without cushioning. It is designed to operate with filtered oil-lubricated or non-oil-lubricated air and does not require additional maintenance. The cylinder is made with a stainless steel sleeve. The dimensions of the outer covers for certain diameters have been reduced, allowing for installation in confined and restricted spaces. The lifespan of cylinders with NBR seals is 15 million cycles, with polyurethane seals 30 million cycles. The presented values should not be considered binding or guaranteed, but only as a reference due to the variability of many factors, including radial and axial loads, speed, temperature, or air losses (limit values). Piston diameter: Ø 8, 10, 12, 16, 20, and 25 mm. Stroke length: from 5 to 500 mm. Operating pressure: from 0.8 to 10 bar (Ø 8, 10, 12 mm); from 0.6 to 10 bar (Ø 16, 20, 25 mm). Sealing: polyurethane, NBR, FKM/FPM. Operating temperature: from -10°C to +150°C depending on the seal used.

Additional information

Maximum operating temperature [°C]

80

Minimum operating temperature [°C]

-10

Standard length [m]

15, 4.5, 40, 50, 60

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY