Is the Mining hydraulic hose EN 853 2ST antistatic and certified for use in explosive mining environments?

Yes. The Mining hydraulic hose EN 853 2ST is antistatic and certified for use in explosive mining environments. Its description specifies an antistatic, non-toxic, flame-resistant outer layer and states it has a certificate confirming compliance with safety requirements in explosion hazard zones. Standards: EN 853-2ST.

Does the Mining hydraulic hose EN 853 2ST have a flame-resistant outer layer and certification for use in explosion hazard zones?

Mining hydraulic hose EN 853 2ST has a flame-resistant outer layer and is certified for use in explosion hazard zones. The hose features an antistatic, non-toxic, flame-resistant outer layer and carries a certificate confirming compliance with safety requirements for explosive atmospheres.

Can the Mining hydraulic hose EN 853 2ST be used safely in underground mining with antistatic and non-toxic properties?

Yes. Mining hydraulic hose EN 853 2ST Format can be used safely in underground mining when antistatic and non-toxic properties are required. The hose is specifically described as a hydraulic hose with increased outer diameter for mining applications and features an antistatic, non-toxic, flameâresistant outer layer. It also carries a certificate confirming compliance with safety requirements for explosion hazard zones, indicating suitability for potentially explosive underground environments. Key supporting features: - Standard: EN 853-2ST (double steel braid reinforcement). suitable for high-pressure hydraulic systems commonly used in mining. - Antistatic outer layer. reduces risk of electrostatic charge buildup in confined, potentially explosive atmospheres. - Non-toxic outer layer. appropriate for environments where contamination or operator exposure is a concern. - Flame-resistant outer layer. adds fire safety in underground settings. - Temperature range: â40Â°C to +100Â°C (temporarily up to +120Â°C). covers typical underground temperature conditions. - Certificate for explosion-hazard zones. formal validation of safety compliance. Installation note: must be installed according to TUBES INTERNATIONALÂ® recommendations and relevant mining and safety regulations. Also ensure correct selection for pressure rating, fittings, routing, abrasion protection and periodic inspection to maintain safe operation underground.

Mining hydraulic hose EN 853 2ST

All products, Hydraulic rubber hoses/

Additional information

Material	synthetic rubber
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40

Hydraulic hose with increased outer diameter for applications in mining. Antistatic, non-toxic, flame-resistant outer layer. It has a certificate confirming compliance with safety requirements in explosion hazard zones. Standards: EN 853-2ST. Installation: contact TUBES INTERNATIONAL®. Inner layer: black synthetic rubber. Reinforcement: double steel braid. Outer layer: black synthetic rubber. Operating temperature: from -40°C to +100°C (temporarily up to +120°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HW-2ST-G-08	Hydraulic hose EN 853 2ST TA 5/16" mining	8	350	In stock	Enquiry
HW-2ST-G-10	Hydraulic hose EN 853 2ST 3/8" mining	10	330	In stock	Enquiry
HW-2ST-G-13	Hydraulic hose EN 853 2ST 1/2" mining	12	275	In stock	Enquiry
HW-2ST-G-19	Hydraulic hose EN 853 2ST 3/4" mining	20	215	In stock	Enquiry
HW-2ST-G-25	Hydraulic hose EN 853 2ST 1" mining	25	165	In stock	Enquiry
HW-2ST-G-32	Hydraulic hose EN 853 2ST 1.1/4" mining	32	125	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hydraulic hose with increased outer diameter for applications in mining. Antistatic, non-toxic, flame-resistant outer layer. It has a certificate confirming compliance with safety requirements in explosion hazard zones. Standards: EN 853-2ST. Installation: contact TUBES INTERNATIONAL®. Inner layer: black synthetic rubber. Reinforcement: double steel braid. Outer layer: black synthetic rubber. Operating temperature: from -40°C to +100°C (temporarily up to +120°C).