Is the Plastic pneumatic throttling valve MRF T/B compatible with standard push-in hose fittings and easy to disconnect for maintenance?

Yes. The Plastic pneumatic throttling valve MRF T/B features a plug-in connection designed specifically for quick attachment and easy disassembly of pneumatic hoses, so it is compatible with standard push-in hose fittings and allows fast disconnects for maintenance. Its plastic body and screwdriver-adjustable throttle make it suitable for typical compressed-air systems (working pressure up to 10 bar, temp. â10Â°C to +70Â°C). Ensure the hose outer diameter and pushâin fitting type match the valveâs plug-in connection specifications for a secure, leakâfree fit.

Can the Plastic pneumatic throttling valve MRF T/B maintain precise flow control at varying supply pressures up to 10 bar?

Plastic pneumatic throttling valve MRF T/B can provide precise flow control within its specified limits, but performance may vary with supply pressure. It is rated for working pressure up to 10 bar and its nominal flow is specified at 6.3 bar (in the throttled direction). Because the valve is designed for simultaneous bidirectional throttling and fine adjustment via a screwdriver, it will regulate flow across the stated pressure range; however, actual precision at different supply pressures depends on system conditions (inlet variation, downstream pressure, hose length/diameter and load). For best and most consistent precision, use it near the conditions for which nominal flow was specified (6.3 bar) and verify performance in your specific application.

Does the Plastic pneumatic throttling valve MRF T/B support bidirectional flow adjustment with screwdriver tuning?

Yes. The Plastic pneumatic throttling valve MRF T/B supports bidirectional flow adjustment with screwdriver tuning. It is specifically designed for simultaneous flow regulation in both directionsâduring filling and ventingâand its adjustment is made using a screwdriver, allowing you to set the flow rate for compressed air in either direction.

Valve throttle pneumatic plastic MRF T/B

All products, Pneumatic valves/

Additional information

Material	P – material (plastic)

Valve throttle type MRF T/B used for simultaneous adjustment flow in both directions – during filling and venting, used in systems pneumatic for adjustment rate flowing stream compressed. Equipped with a push-in connector ensuring easy disassembly of pneumatic lines. Setting adjustment using a screwdriver. stated flow nominal at pressure 6.3 bar (in direction throttled). pressure working: up to 10 bar. Operating temperature: from -10°C to +70°C. Material the body: plastic plastic.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MW-9021214	Throttle valve MRF T/B, hose 12 mm, 1/4" BSP male	-	10	In stock	0 zł		Enquiry
MW-9021215	Throttle valve MRF T/B, hose 12 mm, 3/8" BSP male	-	10	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Valve throttle type MRF T/B used for simultaneous adjustment flow in both directions – during filling and venting, used in systems pneumatic for adjustment rate flowing stream compressed. Equipped with a push-in connector ensuring easy disassembly of pneumatic lines. Setting adjustment using a screwdriver. stated flow nominal at pressure 6.3 bar (in direction throttled). pressure working: up to 10 bar. Operating temperature: from -10°C to +70°C. Material the body: plastic plastic.