Is the Pressure washer hose 10m with deflection limiter, 2x GW M22, SUPER HYDRO WASH suitable for both hot and cold high-pressure cleaning up to 400 bar?

Yes. The Pressure washer hose 10m with deflection limiter, 2x GW M22, SUPER HYDRO WASH is suitable for both hot and cold high-pressure cleaning up to 400 bar provided you choose the 2SC (double steel braid) version. Key points: - Intended use: cleaning with hot or cold water under pressure. - Working pressure: 230 bar for 1SC (single braid) or 400 bar for 2SC (double braid) . select 2SC for up to 400 bar. - Temperature range: -40Â°C to +120Â°C (temporary exposure up to +155Â°C). - Construction: black synthetic rubber inner layer, steel braid reinforcement, micro-perforated polyurethane outer layer, and bend restrictors. - Resistant to weather, cleaning agents, and oils. Ensure you verify which braid type (1SC vs 2SC) is supplied or ordered to match your 400 bar requirement.

Can the Pressure washer hose 10m with deflection limiter, 2x GW M22, SUPER HYDRO WASH withstand exposure to oils and aggressive cleaning agents?

Yes. The Pressure washer hose 10m with deflection limiter, 2x GW M22, SUPER HYDRO WASH is designed for use with hot or cold water under pressure and is explicitly resistant to cleaning agents and oils. Its construction-black synthetic rubber inner layer, micro-perforated polyurethane outer layer, and single or double steel braid reinforcement-plus an operating temperature range of -40Â°C to +120Â°C (temporarily up to +155Â°C) and working pressures of 230 bar (1SC) or 400 bar (2SC) ensure durability against exposure to oils and aggressive cleaning agents.

Does the Pressure washer hose 10m with deflection limiter, 2x GW M22, SUPER HYDRO WASH come with single or double steel braid options?

Pressure washer hose 10m with deflection limiter, 2x GW M22, SUPER HYDRO WASH is available with either single steel braid or double steel braid reinforcement, depending on the hose type (1SC = single braid, 2SC = double braid).

Pressure washer hose 10m with deflection limiter, 2x GW M22, SUPER HYDRO WASH

All products, Hoses for high-pressure washers/

Additional information

Material	CS – steel (cast iron)
Maximum operating temperature [°C]	120
Minimum operating temperature [°C]	-40
Standard length [m]	6

Ready-made hose made from SUPER HYDRO WASH 1SC or SUPER HYDRO WASH 2SC hose with bend restrictors, intended for devices for cleaning with hot or cold water under pressure. Resistant to weather conditions, cleaning agents, and oils. Hose length: 10 m. Inner layer: black synthetic rubber. Reinforcement: single steel braid or double steel braid. Outer layer: micro-perforated polyurethane. Working pressure: 230 bar (1SC) or 400 bar (2SC), depending on the type of hose. Operating temperature: from -40°C to +120°C (temporarily up to +155°C).

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
TU-50-16-1132	Super Hydrowash Hose 1SC DN6 Lc=10m, with bend restriction, 2x G1/2 M22	6	230
TU-50-16-1449	Super Hydrowash Hose 1SC DN8 Lc=10m, with bend restriction, 2x G1/2 M22	8	230
TU-50-16-1450	Super Hydrowash 2SC DN6 hose Lc=10m, with bend restriction, 2x GW M22	6	400

Ready-made hose made from SUPER HYDRO WASH 1SC or SUPER HYDRO WASH 2SC hose with bend restrictors, intended for devices for cleaning with hot or cold water under pressure. Resistant to weather conditions, cleaning agents, and oils. Hose length: 10 m. Inner layer: black synthetic rubber. Reinforcement: single steel braid or double steel braid. Outer layer: micro-perforated polyurethane. Working pressure: 230 bar (1SC) or 400 bar (2SC), depending on the type of hose. Operating temperature: from -40°C to +120°C (temporarily up to +155°C).