Is the NiTO CLICK 1/2" water quick connector plug with GZ, brass suitable for use with mild cleaning agents and temperatures down to -30Â°C?

Yes. The NiTO CLICK 1/2" water quick connector plug with GZ, brass is designed for water and water with cleaning agents, and its operating temperature range is â30Â°C to +80Â°C. The plug is made of chromeâplated brass, uses an external NBR Oâring for sealing (NBR is compatible with mild cleaning agents but not with gasoline or oils), and is rated for working pressures up to 25 bar. Therefore it is suitable for use with mild cleaning agents and for temperatures down to â30Â°C.

Can the NiTO CLICK 1/2" water quick connector plug with GZ, brass be used with fertilizers or acidic cleaning solutions?

NiTO CLICK 1/2" water quick connector plug with GZ, brass is designed primarily for water and water with cleaning agents and is compatible with common garden quick couplings. Sealing is by an external NBR Oâring, and the product is rated for temperatures â30Â°C to +80Â°C and pressures up to 25 bar. NBR is not resistant to strong acids or many aggressive chemicals; therefore using concentrated fertilizers or acidic cleaning solutions may degrade the seal and shorten service life or cause leaks. For dilute, mild cleaning agents it should be acceptable; for acidic solutions or aggressive fertilizers, consult the supplier or choose a coupling with a chemically resistant seal (e.g., EPDM or FKM) before use.

Does the NiTO CLICK 1/2" water quick connector plug with GZ, brass require special maintenance to preserve the external O-ring seal?

No special maintenance is required beyond standard care to preserve the external Oâring seal on the NiTO CLICK 1/2" water quick connector plug with GZ, brass. Recommended routine actions: - Rinse the Oâring and mating surfaces with clean water after use to remove dirt, sand and chemical residues. - Inspect the Oâring regularly for cuts, flattening or hardening and replace if damaged. - Avoid exposure to gasoline, oils or solvents (seal is NBR and not compatible with these). - Lubricate the Oâring occasionally with a compatible NBR-safe silicone or water-based lubricant to keep it supple (do not use petroleum-based oils). - Store the connector dry and protected from prolonged UV exposure and extreme temperatures when not in use (operating range is â30Â°C to +80Â°C). Following these simple steps will maintain sealing performance and the unitâs durability without any special or complex maintenance.

Plug water quick coupling NiTO CLICK 1/2″ with male thread, brass

All products, Quick couplings for water/

Additional information

Material	B – brass (bronze)

Plug water quick coupling NiTO CLICK 1/2″ with a thread external. NiTO CLICK quick couplings are water quick couplings made to the profile of very popular plastic garden quick couplings and compatible with them. Sealing by means of an O-ring placed externally on the plug. Manufactured in Denmark – 5-year warranty. They retain the simplicity of the commonly known plastic quick couplings and are characterized by strength and durability. Intended for water, water with cleaning agents, for use in industry, services, horticulture, agriculture, etc.. Material: brass chrome-plated (matte – satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasolines and oils).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
NT-59640A3	Quick coupling plug NiTO CLICK 1/2" with 1/2" BSP male, brass chrome-plated	-	25	In stock	0 zł		Enquiry
NT-5964AA3	Quick coupling plug NiTO CLICK 1/2" with 3/4" BSP male, brass chrome-plated	-	25	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Plug water quick coupling NiTO CLICK 1/2″ with a thread external. NiTO CLICK quick couplings are water quick couplings made to the profile of very popular plastic garden quick couplings and compatible with them. Sealing by means of an O-ring placed externally on the plug. Manufactured in Denmark – 5-year warranty. They retain the simplicity of the commonly known plastic quick couplings and are characterized by strength and durability. Intended for water, water with cleaning agents, for use in industry, services, horticulture, agriculture, etc.. Material: brass chrome-plated (matte – satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasolines and oils).