Is the TE-NT screw connection tee, stainless steel, compatible with sealants like PTFE tape or anaerobic thread sealant for NPT threads?

Yes. The TE-NT screw connection tee, stainless steel (DIN 2353 type TE-NT) is compatible with thread sealants for its external NPT thread. The fitting description explicitly states the NPT thread is sealed on the thread and can be used with PTFE (Teflon) tape or an anaerobic thread sealant. Material is AISI 316 stainless steel, safety factor 2.5:1, available in L (light) and S (heavy) series. Notes for best practice: - Use appropriate PTFE tape for NPT (wrap 2â3 turns in the direction of threading). - If using anaerobic sealant, choose a product rated for stainless steel and compatible fluids/temperatures in your system. - Avoid excess sealant that could contaminate the fluid path; follow manufacturer cure times and tightening torques.

Can the TE-NT screw connection tee, stainless steel, be used with PTFE tape or anaerobic sealant on its NPT external threads while maintaining the DIN 2353 24Â° sealing integrity?

Yes. The TE-NT screw connection tee, stainless steel maintains the DIN 2353 24Â° sealing integrity when used as intended: its 24Â° DIN 2353 socket provides the primary metal-to-metal seal, while the external NPT thread is explicitly described for sealing on the thread (with PTFE tape or anaerobic sealant). Applying PTFE tape or an anaerobic thread sealant on the NPT external threads is acceptable and compatible with the fittingâs design and material (AISI 316), preserving the DIN 2353 24Â° seal. Ensure proper application: use correct tape/sealant quantity, wrap in thread direction, avoid contaminating the 24Â° cone sealing surfaces, and torque to the manufacturerâs specifications for the chosen series (L or S) to maintain the specified safety factor (2.5:1).

Can TE-NT screw connection tee, stainless steel, with external NPT thread require specific sealant application methods?

Yes. For the TE-NT screw connection tee, stainless steel (24Â° DIN 2353 socket with external metric thread and external NPT thread; seal on the thread â with Teflon tape or anaerobic sealant), specific sealant application methods are recommended to ensure leak-free, durable joints and to protect the AISI 316 material and thread form: - Choose the correct sealant: use PTFE (Teflon) tape rated for NPT pipe threads or a compatible anaerobic thread sealant formulated for stainless steel. Avoid sealants containing chlorinated solvents that can cause stress corrosion cracking in stainless steel. - Apply PTFE tape properly: wrap tape clockwise (in the direction of thread engagement) starting at the second thread to avoid tape entering the bore. Use 2â4 wraps depending on thread size; avoid overwrapping which can prevent full thread engagement or distort sealing surfaces. - Use anaerobic sealant correctly: apply a thin, even bead to the male NPT threads only. Ensure the sealant is compatible with the fluid/media, pressure, and temperature ratings. Allow recommended cure time before pressurizing, and consider using a fast-curing grade if assembly must be immediate. - Thread engagement and torque: assemble with correct torque values for the TE-NT series (observe manufacturer or DIN 2353 guidance). Do not over-torqueâexcessive torque can deform 24Â° seats or damage threads; under-torquing can cause leaks. - Cleanliness and surface prep: ensure threads are clean, dry and free of oils, debris or burrs. For anaerobic sealants, mating surfaces should be free of contaminants to ensure full cure. - Avoid sealing the 24Â° seat: sealing compound should be applied only to the external NPT threads; the 24Â° DIN 2353 sealing face must remain clean and make metal-to-metal contact for proper sealing. - Inspection and testing: after assembly and cure, perform pressure testing per system requirements. Reinspect for leaks and, if disassembly is needed, remove hardened sealant carefully to avoid damaging threads. Following these methods will provide reliable sealing for the TE-NT screw connection tee, stainless steel while maintaining the integrity and performance of the fitting.

TE-NT screw connection tee, stainless steel

Additional information

Material	SS – stainless steel

DIN 2353 screw-in tee fitting, type TE-NT: 24° DIN 2353 socket with external metric thread and external NPT thread (seal on the thread – with Teflon tape or anaerobic sealant). Safety factor 2.5:1. Available as: L (light series), S (heavy series). Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HD-TE-06L-NT-02-SS	DIN 2353 fitting TE 6L 1/8" NPT, AISI 316	-	315	In stock	Enquiry
HD-TE-06S-NT-04-SS	DIN 2353 fitting TE 6S 1/4" NPT, AISI 316	-	630	In stock	Enquiry
HD-TE-08L-NT-04-SS	DIN 2353 fitting TE 8L 1/4" NPT, AISI 316	-	315	In stock	Enquiry
HD-TE-08S-NT-04-SS	DIN 2353 fitting TE 8S 1/4" NPT, AISI 316	-	630	In stock	Enquiry
HD-TE-10L-NT-04-SS	DIN 2353 fitting TE 10L 1/4" NPT, AISI 316	-	315	In stock	Enquiry
HD-TE-10S-NT-06-SS	DIN 2353 fitting TE 10S 3/8" NPT, AISI 316	-	630	In stock	Enquiry
HD-TE-12L-NT-06-SS	DIN 2353 fitting TE 12L 3/8" NPT, AISI 316	-	315	In stock	Enquiry
HD-TE-12S-NT-06-SS	DIN 2353 fitting TE 12S 3/8" NPT, AISI 316	-	630	In stock	Enquiry
HD-TE-14S-NT-08-SS	DIN 2353 fitting TE 14S 1/2" NPT, AISI 316	-	630	In stock	Enquiry
HD-TE-15L-NT-08-SS	DIN 2353 fitting TE 15L 1/2" NPT, AISI 316	-	315	In stock	Enquiry
HD-TE-16S-NT-08-SS	DIN 2353 fitting TE 16S 1/2" NPT, AISI 316	-	400	In stock	Enquiry
HD-TE-18L-NT-08-SS	DIN 2353 fitting TE 18L 1/2" NPT, AISI 316	-	315	In stock	Enquiry
HD-TE-20S-NT-12-SS	DIN 2353 fitting TE 20S 3/4" NPT, AISI 316	-	400	In stock	Enquiry
HD-TE-22L-NT-12-SS	DIN 2353 fitting TE 22L 3/4" NPT, AISI 316	-	160	In stock	Enquiry
HD-TE-25S-NT-16-SS	DIN 2353 fitting TE 25S 1" NPT, AISI 316	-	400	In stock	Enquiry
HD-TE-28L-NT-16-SS	DIN 2353 fitting TE 28L 1" NPT, AISI 316	-	160	In stock	Enquiry
HD-TE-30S-NT-20-SS	DIN 2353 fitting TE 30S 1.1/4" NPT, AISI 316	-	400	In stock	Enquiry
HD-TE-35L-NT-20-SS	DIN 2353 fitting TE 35L 1.1/4" NPT, AISI 316	-	160	In stock	Enquiry
HD-TE-38S-NT-24-SS	DIN 2353 fitting TE 38S 1.1/2" NPT, AISI 316	-	315	In stock	Enquiry
HD-TE-42L-NT-24-SS	DIN 2353 fitting TE 42L 1.1/2" NPT, AISI 316	-	160	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DIN 2353 screw-in tee fitting, type TE-NT: 24° DIN 2353 socket with external metric thread and external NPT thread (seal on the thread – with Teflon tape or anaerobic sealant). Safety factor 2.5:1. Available as: L (light series), S (heavy series). Material: AISI 316 steel.