Can the Sensor holder for pneumatic cylinders ISO 15552 fi 160 - 200 with cylindrical sleeve be used with proximity sensors of different mounting hole patterns and sizes?

The Sensor holder for pneumatic cylinders ISO 15552 fi 160 - 200 with cylindrical sleeve is designed to fit ISO 15552 actuators with diameters 160â200 mm and provides a cylindrical sleeve interface for mounting proximity sensors. Its compatibility with sensors that have different mounting hole patterns and sizes depends on these factors: - Sleeve inner diameter and sensor body size: the cylindrical sleeve accepts sensors whose bodies fit within the sleeve diameter. Sensors significantly larger than the sleeve or with non-cylindrical bodies will not seat properly. - Mounting hole pattern: the bracketâs sleeve design typically aligns with standard ISO/Europattern sensors; if a sensorâs mounting holes do not match the bracketâs fixing points, additional adapters or custom drilling will be required. - Sensor type and fastening method: sensors that rely on screws through specific holes or flanges may not be directly compatible unless their hole spacing matches the bracket or can be secured using clamps, adapters or alternative fasteners. - Clearance and actuator hardware: ensure enough axial and radial clearance for sensor connectors and cables; different sensor sizes may interfere with actuator covers or other components. Conclusion: The Sensor holder for pneumatic cylinders ISO 15552 fi 160 - 200 with cylindrical sleeve can accommodate many proximity sensors, especially those following common ISO mounting conventions and whose bodies fit the sleeve, but it is not universally compatible with all hole patterns and sizes. For nonstandard sensors, check actual sleeve dimensions and mounting hole locations or use an adapter to ensure secure and accurate mounting.

Is Sensor holder for pneumatic cylinders ISO 15552 fi 160 - 200 with cylindrical sleeve compatible with threaded sensor bodies?

Sensor holder for pneumatic cylinders ISO 15552 fi 160 - 200 with cylindrical sleeve is designed for proximity sensor mounting on ISO 15552 actuators; it features an aluminum cylindrical sleeve sized for diameters 160â200 mm. Compatibility with threaded sensor bodies depends on sleeve inner profile and available mounting hole/thread in the bracket: if the cylindrical sleeve or bracket includes a threaded receptacle or adapter matching the sensor body thread, threaded sensors will be compatible; if the sleeve is smooth and intended for clip-on or clamp-style sensors only, threaded bodies may not secure properly without an additional adapter. Verify sensor thread size and whether the bracket version provides a threaded insert or compatible adapter before installation.

Does Sensor holder for pneumatic cylinders ISO 15552 fi 160 - 200 with cylindrical sleeve allow sensor height adjustment?

Sensor holder for pneumatic cylinders ISO 15552 fi 160 - 200 with cylindrical sleeve does not explicitly state adjustable sensor height in the provided description. The description only specifies that it is a proximity sensor mounting bracket for ISO 15552 actuators, version with cylindrical sleeve, made of aluminum, for diameters 160 Ã· 200. Without mention of slots, threaded holes at multiple heights, or an adjustable clamping mechanism, you should assume fixed mounting position determined by the sleeve and bracket geometry rather than continuous height adjustment. If height adjustment is required, verify with the manufacturer or request product drawings/specifications to confirm presence of adjustable features (e.g., sliding rail, stepped holes, or movable clamp).