Is the Sturdy industrial hose for water and air MONTANA 20Â® suitable for use with oil mist environments and what maintenance is required?

Yes. The Sturdy industrial hose for water and air MONTANA 20Â® is suitable for environments with oil mist: its inner layer is made of black SBR rubber specifically described as resistant to oil mist, and the hose is built for harsh industrial conditions. Maintenance required: - Regular visual inspections for cuts, abrasions, cracking or soft spots on inner and outer layers. - Check for chemical attack or swelling where oil exposure is heavy; remove from service if integrity is compromised. - Inspect fittings, couplings and reinforcement for corrosion, looseness or damage; replace defective parts. - Clean interior periodically to remove oil deposits and prevent buildup.use compatible cleaners that do not degrade SBR or EPDM. - Store coiled, dry and out of direct sunlight when not in use to protect EPDM outer layer; avoid temperatures outside â30Â°C to +70Â°C. - Follow manufacturerâs pressure limits (working pressure 20 bar) and avoid impacts or kinking that stress reinforcement. If oil types or concentrations are unusual or exposure is continuous, perform application-specific testing or contact Tubes International for confirmation.

Can Sturdy industrial hose for water and air MONTANA 20Â® be used continuously at 20 bar in quarry and road construction environments?

Yes. Sturdy industrial hose for water and air MONTANA 20Â® is specified with a working pressure of 20 bar and is designed for harsh environments including industry, road construction and quarries. Its construction-black SBR inner layer resistant to oil mist, synthetic cord reinforcement, and abrasion- and weather-resistant EPDM outer layer-supports continuous operation in such conditions across a temperature range of â30Â°C to +70Â°C. For extended runs beyond standard lengths (60 m; 120 m on request) or for specific site safety/certification needs, consult Tubes International for confirmation or tailored advice.

Does the Sturdy industrial hose for water and air MONTANA 20Â® resist UV and ozone exposure in outdoor quarry use?

Yes. The Sturdy industrial hose for water and air MONTANA 20Â® is described as abrasion and weather resistant with an outer layer made of EPDM rubber, which is specifically known for good resistance to ozone and UV exposure. Its construction for harsh outdoor use. including quarries. and temperature range from â30Â°C to +70Â°C further supports suitability for prolonged outdoor service. Therefore the MONTANA 20Â® resists UV and ozone exposure and is appropriate for outdoor quarry use.

Sturdy industrial hose for water and air MONTANA 20®

Air and water hoses, All products/

Additional information

Material	SBR – styrene-butadiene rubber
Maximum operating temperature [°C]	70
Minimum operating temperature [°C]	-30
Vacuum resistance	no
Standard length [m]	100, 25, 50, 60
Reinforcement	synthetic braid

Strong industrial suction hose for water and compressed air, designed for operation in harsh conditions in industry, road construction, and even in quarries. Inner layer resistant to oil mist. Abrasion and weather resistant. Widely used and proven in various industrial applications. Hose available in black and yellow. Standard length: 60 m (or 120 m – contact Tubes International). Inner layer: black SBR rubber. Reinforcement: synthetic cord. Outer layer: black or yellow EPDM rubber. Working pressure: 20 bar. Operating temperature: from -30°C to +70°C.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
IV-MONTANA20-010	MONTANA/20 hose 10x19 mm	10	20
IV-MONTANA20-010Y	MONTANA/20 hose 10x17 mm, yellow	10	20
IV-MONTANA20-013	MONTANA/20 hose 13x23 mm	12	20
IV-MONTANA20-013Y	Hose MONTANA/20 13x20 mm, yellow	12	20
IV-MONTANA20-016	MONTANA/20 hose 16x26 mm	16	20
IV-MONTANA20-016Y	MONTANA/20 hose 16x26 mm, yellow	16	20
IV-MONTANA20-019	MONTANA/20 hose 19x30 mm	20	20
IV-MONTANA20-019Y	MONTANA/20 hose 19x29 mm, yellow	20	20
IV-MONTANA20-022	Hose MONTANA/20 22x32 mm	22	20
IV-MONTANA20-025	MONTANA/20 hose 25x35 mm	25	20
IV-MONTANA20-025Y	Hose MONTANA/20 25x36 mm, yellow	25	20
IV-MONTANA20-032	MONTANA/20 hose 32x44 mm	32	20
IV-MONTANA20-032Y	MONTANA/20 hose 32x42 mm, yellow	32	20
IV-MONTANA20-035	MONTANA/20 hose 35x45 mm	35	20
IV-MONTANA20-038	MONTANA/20 hose 38x51 mm	38	20
IV-MONTANA20-038Y	Hose MONTANA/20 38x49 mm, yellow	38	20
IV-MONTANA20-040	MONTANA/20 hose 40x54 mm	40	20
IV-MONTANA20-045	MONTANA/20 hose 45x58 mm	45	20
IV-MONTANA20-051	MONTANA/20 hose 51x69 mm	50	20
IV-MONTANA20-051Y	Hose MONTANA/20 51x67 mm, yellow	50	20
IV-MONTANA20-063	Hose MONTANA/20 63.5x81.5 mm	65	20
IV-MONTANA20-063Y	MONTANA/20 hose 63.5x81 mm, yellow	65	20
IV-MONTANA20-076	Hose MONTANA/20 76x94.5 mm	75	20
IV-MONTANA20-076Y	MONTANA/20 hose 76x93 mm, yellow	75	20
IV-MONTANA20-080	MONTANA/20 hose 80x96 mm	80	20
IV-MONTANA20-090	MONTANA/20 hose 90x110 mm	90	20
IV-MONTANA20-102	MONTANA/20 hose 102x122 mm	100	20
IV-MONTANA20-102Y	Hose MONTANA/20 102x120 mm, yellow	100	20

Strong industrial suction hose for water and compressed air, designed for operation in harsh conditions in industry, road construction, and even in quarries. Inner layer resistant to oil mist. Abrasion and weather resistant. Widely used and proven in various industrial applications. Hose available in black and yellow. Standard length: 60 m (or 120 m – contact Tubes International). Inner layer: black SBR rubber. Reinforcement: synthetic cord. Outer layer: black or yellow EPDM rubber. Working pressure: 20 bar. Operating temperature: from -30°C to +70°C.

Additional information

Material	SBR – styrene-butadiene rubber
Maximum operating temperature [°C]	70
Minimum operating temperature [°C]	-30
Vacuum resistance	no
Standard length [m]	100, 25, 50, 60
Reinforcement	synthetic braid